MPS2222A-AP

MPS2222A Features • Halogen Free Available Upon Request By Adding Suffix "-HF" • Moisture Sensitivity Level 1 • Epoxy Meets UL 94 V-0 Flammability Rating • Lead Free Finish/RoHS Compliant ("P" Suffix Designates RoHS Compliant. See Ordering Information) NPN Silicon Transistors Maximum Ratings @ 25°C Unless Otherwise Specified • Operating Junction Temperature Range: -55℃ to +150℃ • Storage Temperature Range: -55℃ to +150℃ • Thermal Resistance: 208℃/W Junction to Ambient Symbol Rating Unit Collector-Base Voltage VCBO 75 V Collector-Emitter Voltage VCEO 40 V Emitter-Base Voltage VEBO 6 V Continuous Collector Current IC 600 mA Power Dissipation PD 625 mW Parameter TO-92 A Marking:Type Number E Internal Structure B G C B E 1 2 3 C 1.EMITTER 2.BASE 3.COLLECTOR D DIM A B C D E G Rev.3-2-09062019 1/4 DIMENSIONS INCHES MM NOTE MIN MAX MIN MAX 0.169 0.185 4.30 4.70 0.169 0.185 4.30 4.70 0.500 ----- 12.70 ----0.015 0.022 0.38 0.55 0.130 0.146 3.30 3.70 0.095 0.105 2.42 2.67 Straight Lead 0.173 0.220 4.40 5.60 Bent MCCSEMI.COM MPS2222A Electrical Characteristics @ TA=25°C Unless Otherwise Specified Parameter Symbol Min Typ Max Units Conditions Collector-Base Breakdown Voltage V(BR)CBO 75 V IC=10µA, IE=0 Collector-Emitter Breakdown Voltage* V(BR)CEO 40 V IC=10mA, IB=0 Emitter-Base Breakdown Voltage V(BR)EBO 6 V IE=10µA, IC=0 Base Cutoff Current IBL 0.02 µA VCE=60V, VBE=3V Collector Cut-off Current ICEX 0.01 µA VCE=60V, VBE=3V DC Current Gain* hFE(1) 35 VCE=10V, IC=0.1mA hFE(2) 50 VCE=10V, IC=1mA hFE(3) 75 VCE=10V, IC=10mA hFE(4) 100 hFE(5) 50 VCE=1V, IC=150mA hFE(6) 40 VCE=10V, IC=500mA Collector-Emitter Saturation Voltage VCE(sat) Base-Emitter Saturation Voltage VBE(sat) Transition Frequency fT Delay Time td Rise Time VCE=10V, IC=150mA 300 0.6 0.3 V IC=150mA, IB=15mA 1 V IC=500mA, IB=50mA 1.2 V IC=150mA, IB=15mA 2 V IC=500mA, IB=50mA MHz VCE=20V, IC=20mA, f=100MHz 10 ns tr 25 ns VCC=30V, VBE=0.5V, IC=150mA, IB1=15mA Storage Time ts 225 ns Fall Time tf 60 ns Output Capacitance Ccbo 8 pF VCB=10V, IE=0,f=100Hz Input Capacitance Cibo 25 pF VBE=0.5V, IC=0, f=100Hz Noise Figure NF 4 dB VCE=10V,IC=0.1mA,f=1KHz,RS=1KΩ 300 VCC=30V, IC=150mA, IB1=IB2=15mA *.Pulse test: Pulse Width≤300μs,Duty Cycle≤2.0%. Rev.3-2-09062019 2/4 MCCSEMI.COM MPS2222A Curve Characteristics Fig. 1 - Static Characteristics 250 COMMON EMITTER TA=25°C Common Emitter VCE=10V 1.0mA 0.9mA 200 TA=100°C 0.8mA DC Current Gain Collector Current (mA) Fig. 2 - DC Current Gain Characteristics 1000 0.7mA 150 0.6mA 0.5mA 100 0.4mA TA=25°C 100 0.3mA 50 0.2mA IB= 0.1mA 0 2 0 4 6 10 8 12 14 10 16 1 10 Collector-Emitter Voltage (V) Collector Current (mA) Fig. 3 - Collector-Emitter Saturation Voltage Characteristics Base-Emitter Saturation Voltage (V) Collector-Emitter Saturation Voltage (mV) β=10 TA=100°C TA=25°C 10 Fig. 4 - Base-Emitter Saturation Voltage Characteristics 1.2 1000 100 1 10 100 0.9 0.6 0.3 600 TA=25°C TA=100°C β=10 1 10 Collector Current (mA) Fig. 6 - Collector Power Derating Curve Collector Power Dissipation (W) Collcetor Current (mA) 100 TA=25°C TA=100°C 1 0.1 0.0 0.3 0.6 0.9 0.6 0.4 0.2 0.0 1.2 0 25 50 75 100 125 150 Ambient Temperature (°C) Base-Emitter Voltage (V) Rev.3-2-09062019 600 0.8 Common Emitter VCE=10V 10 100 Collector Current (mA) Fig. 5 - Base-Emitter Voltage Characteristics 600 600 100 3/4 MCCSEMI.COM MPS2222A Ordering Information Device Packing Part Number-AP Ammo Packing: 20Kpcs/Carton Part Number-BP Bulk: 100Kpcs/Carton Note : Adding "-HF" Suffix for Halogen Free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-2-09062019 4/4 MCCSEMI.COM