MUR6060B-BP

MUR6060B Features • Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix Designates Compliant. See Ordering Information) • Halogen Free Available Upon Request By Adding Suffix "-HF" • High Frequency Operation • High Surge Forward Current Capability • Epoxy Meets UL 94 V-0 Flammability Rating • Moisture Sensitivity Level 1 • Planar Structure Die and Soft Recovery Characteristics 60 Amp Ultra Fast Recovery Rectifier 600 Volts Maximum Ratings • Operating Junction Temperature Range: -55⁰C to +175⁰C • Storage Temperature Range: -55⁰C to +175⁰C • Maximum Thermal Resistance: 0.8 °C/W Junction to Case MCC Part Number MUR6060B Maximum Recurrent Peak Reverse Voltage Device Marking MUR6060B 600V 420V IF(AV) 60A Peak Forward Surge Current IFSM 600A Instantaneous Forward Voltage VF TC=95⁰C 8.3ms,Half Sine 1.7V(Max.) 1.43V(Typ.) E IF=60A; TJ=25⁰C U O T D C S B R P G I J F H Q Maximum Reverse Current At Rated DC Blocking Voltage IR Typical Junction Capacitance CJ 10μA TJ=25⁰C; TJ=125⁰C 500μA 415pF Measured at 1.0MHz, VR=4V Dynamic Recovery Characteristics @ 25°C Unless Otherwise Specified 58ns(Typ.) Reverse Recovery Time K A 600V Electrical Characteristics @ 25°C Unless Otherwise Specifie Average Rectified Forward Current TO-247AD Maximum DC Blocking Voltage Maximum RMS Voltage trr 75ns(Max.) IF=0.5A; IR=1.0A; IRR=0.25A 80ns(Typ.) 175ns(Typ.) TJ=25⁰C TJ=125⁰C IF = 40 A TJ=25⁰C diF/dt = 200 A/μs TJ=125⁰C VR = 200 V Peak recovery current IRRM 7.0A(Typ.) 17A(Typ.) Reverse recovery charge Qrr 280nC(Typ.) TJ=25⁰C 1500nC(Typ.) TJ=125⁰C Note:1. High Temperature Solder Exemptions Applied, See EU Directive Annex 7a. Internal Structure 1 DIM A B C D E F G H I J K O P Q R S T U 2 INCHES MIN MAX 0.602 0.642 0.799 0.839 0.189 0.205 0.242 0.091 0.106 0.772 0.796 ----- 0.169 0.428 0.075 0.087 0.044 0.054 0.189 0.205 0.073 0.085 0.087 0.103 0.020 0.030 0.512 0.535 0.640 0.663 0.134 0.150 ----- 0.287 MM MIN MAX 15.30 16.30 20.30 21.30 4.80 5.20 6.15 2.30 2.70 19.62 20.22 ----- 4.30 10.88 1.91 2.21 1.11 1.36 4.80 5.20 1.85 2.15 2.21 2.61 0.51 0.75 13.00 13.60 16.25 16.85 3.40 3.80 ----- 7.30 NOTE BSC. BSC. Φ Φ PIN 1 PIN 2 Rev.3-5-11112020 CASE 1/3 MCCSEMI.COM MUR6060B Curve Characteristics Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current 720 60 600 Peak Forward Surge Current (A) Average Forward Current (A) Fig. 1 - Forward Current Derating Curve 70 50 40 30 20 10 0 Resistive or Inductive Load 480 360 240 120 8.3 ms Single Half Sine-Wave 0 35 70 105 140 0 175 Case Temperature (°C) Fig. 4 - Typical Reverse Leakage Characteristics 1000 Instantaneous Reverse Leakage Current (μA) 60 TJ=175°C 10 TJ=125°C TJ=25°C 1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 10 TJ=125°C 1 0.1 0.01 TJ=25°C 0.001 20 1.6 TJ=175°C 100 40 60 80 100 Instantaneous Forward Voltage (V) Percent of Rated Peak Reverse Voltage (%) Fig. 5 - Capacitance Characteristics Fig. 6 - Reverse Recovery Waveform and Definitions 1200 Capacitance Between Terminals (pF) 100 Number of Cycles at 60 Hz Fig. 3 - Typical Instantaneous Forward Characteristics Instantaneous Forward Current (A) 10 1 (3) TJ=25°C f=1MHz 1000 trr IF ta tb 0 Qrr 800 (2) 600 (1) diF/dt IRRM (4) 0.5 IRRM di(rec)M/dt (5) 0.75 IRRM 400 (1) diF/dt - rate of change of current through zero crossing 200 0 (2) IRRM - peak reverse recovery current 0 5 10 15 20 25 (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. 30 Reverse Voltage (V) Rev.3-5-11112020 2/3 (4) Qrr - area under curve defined by trr and IRRM Qrr = trr x IRRM 2 (5) di(rec)M/dt - peak rate of change of current during tb portion of trr MCCSEMI.COM MUR6060B Ordering Information Device Packing Bulk:30pcs/Tube,360pcs/Box,1.8Kpcs/Carton Part Number-BP Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-BP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. Micro Commercial Components Corp. products are sold subject to the general terms and conditions of commercial sale, as published at https://www.mccsemi.com/Home/TermsAndConditions. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3- 3/3 MCCSEMI.COM