MURS1660FCTA-BP

MURS1660FCTA Features • Halogen Free Available Upon Request By Adding Suffix "-HF" • Lead Free Finish/RoHS Compliant (Note1) ("P"Suffix Designates Compliant. See Ordering Information) • Epoxy Meets UL 94 V-0 Flammability Rating • Low Switching Losses and High Efficiency • Low Reverse Leakage • Ultrafast Recovery Time • Planar Structure Die and Soft Recovery Characteristics 16 Amp FRED Rectifiers 600 Volts Maximum Ratings • Operating Junction Temperature Range: -55⁰C to +150⁰C ITO-220AB • Storage Temperature Range: -55⁰C to +150⁰C • Typical Thermal Resistance: 4°C/W Junction to Case MCC Part Number Maximum Recurrent Peak Reverse Voltage Device Marking MURS1660FCTA MURS1660FCTA Maximum Maximum DC Blocking RMS Voltage Voltage 600V 420V L M B C K D 600V A Electrical Characteristics @ 25°C Unless Otherwise Specified    E Average Rectified Forward Current IF(AV) 16A TC = 50°C F G I J Peak Forward Surge Current Instantaneous Forward Voltage IFSM VF 100A 1.4V(Typ) 1.6V(Max) 1.35V(Max) IF=8A; TJ=25⁰C IF=8A; TJ=25⁰C IF=8A; TJ=125⁰C DIM Maximum Reverse Current At Rated DC Blocking Voltage IR Maximum Reverse Recovery Time trr 35ns IF=0.5A; IR=1.0A; IRR=0.25A Typical Junction Capacitance CJ 35pF Measured at 1.0MHz, VR=4.0V 5μA 50μA TJ=25⁰C; TJ=125⁰C Note :1. High Temperature Solder Exemption Applied, See EU Directive Annex 7a. Internal Structure PIN 1 PIN 3 Rev.3-2-11112020 H 8.3ms,Half Sine A B C D E F G H I J K L M N O H O N DIMENSIONS INCHES MM MIN MAX MIN MAX 0.567 0.642 14.40 16.30 ----- 0.421 ----- 10.70 0.085 0.128 2.15 3.25 0.248 0.272 6.30 6.90 ----- 0.177 ----- 4.50 ----- 0.071 ----- 1.80 0.500 0.539 12.70 14.20 0.100 2.55 ----- 0.035 ----- 0.90 ----- 0.032 ----- 0.80 0.102 0.150 2.60 3.80 ----- 0.201 ----- 5.10 ----- 0.140 ----- 3.56 0.083 0.126 2.10 3.20 ----- 0.071 ----- 1.80 NOTE Φ PIN 2 1/3 MCCSEMI.COM MURS1660FCTA Curve Characteristics Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 1 - Forward Current Derating Curve 120 Peak Forward Surge Current (A) Average Forward Current (A) 20 16 12 8 4 80 40 Resistive or Inductive Load 0 0 25 50 8.3 ms Single Half Sine-Wave 75 100 125 0 150 10 1 Cace Temperature (°C) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 4 - Typical Reverse Leakage Characteristics 100 Instantaneous Reverse Leakage Current (μA) Instantaneous Forward Current (A) 20 TJ=25°C =100°C =125°C =150°C 10 1 0.6 0.8 1.0 1.2 1.4 1.6 TJ=150°C 10 TJ=125°C 1 TJ=100°C 0.1 0.01 TJ=25°C 0.001 20 1.8 Instantaneous Forward Voltage (V) Rev.3-2-11112020 100 Number of Cycles at 60 Hz 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) 2/3 MCCSEMI.COM MURS1660FCTA Ordering Information Device Packing Part Number-BP Bulk:50pcs/Tube,1Kpcs/Box,5Kpcs/Carton Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-BP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. Micro Commercial Components Corp. products are sold subject to the general terms and conditions of commercial sale, as published at https://www.mccsemi.com/Home/TermsAndConditions. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-2-11112020 3/3 MCCSEMI.COM