MCC
TM
Micro Commercial Components
omponents 20736 Marilla Street Chatsworth !"# $
% !"#
PN2222A
Features
• Lead Free Finish/RoHS Compliant ("P" Suffix designates RoHS Compliant. See ordering information)
• •
•
Marking:Type number Continuous Collector Current (Ic) =600mA. Operating and storange temperature range(Tj&Tstg) from -55°C ~+150 °C
Electrical Characteristics @ 25°C Unless Otherwise Specified
Symbol Parameter Collector-Emitter Breakdown Voltage* (I C=10mAdc, IB=0) Collector-Base Breakdown Voltage (I C=10µ Adc, IE=0) Emitter-Base Breakdown Voltage (I E=10µ Adc, IC=0) Base Cutoff Current (VCE=60Vdc, VBE=3.0Vdc) Collector Cutoff Current (VCE=60Vdc, VBE=3.0Vdc) DC Current Gain* (I C=0.1mAdc, VCE=10Vdc) (I C=1.0mAdc, VCE=10Vdc) (I C=10mAdc, VCE=10Vdc) (I C=150mAdc, VCE=10Vdc) (I C=150mAdc, VCE=1.0Vdc) (I C=500mAdc, VCE=10Vdc) Collector-Emitter Saturation Voltage (I C=150mAdc, IB=15mAdc) (I C=500mAdc, IB=50mAdc) Base-Emitter Saturation Voltage (I C=150mAdc, IB=15mAdc) (I C=500mAdc, IB=50mAdc) Current Gain-Bandwidth Product (I C=20mAdc, VCE=20Vdc, f=100MHz) Output Capacitance (VCB=10Vdec, IE=0, f=100kHz) Input Capacitance (VBE=0.5Vdc, IC=0, f=100kHz) Noise Figure (IC=100µAdc, VCE=10Vdc, RS=1.0kΩ f=1.0kHz) Delay Time (VCC=30Vdc, VBE=0.5Vdc Rise Time IC=150mAdc, IB1=15mAdc) Storage Time (VCC=30Vdc, IC=150mAdc Fall Time IB1=IB2=15mAdc) ≤ 300µ s, Duty Cycle ≤ 2.0% Min 40 75 6.0 20 10 Max Units A Vdc Vdc Vdc nAdc nAdc
Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 and MSL Rating 1
600mW NPN General Purpose Amplifier
TO-92
E
OFF CHARACTERISTICS
V(BR)CEO V(BR)CBO V(BR)EBO IBL ICEX
B
ON CHARACTERISTICS
hFE C 35 50 75 100 50 40
300
VCE(sat)
0.3 1.0 0.6 1.2 2.0
Vdc
D
VBE(sat)
Vdc C B E
SMALL-SIGNAL CHARACTERISTICS
fT Cobo Cibo NF 300 8.0 25 4.0 MHz pF pF dB
DIM A B C D E G INCHES MIN .175 .175 .500 .016 .135 .095
G
DIMENSIONS MM MIN 4.45 4.45 12.70 0.41 3.43 2.42
SWITCHING CHARACTERISTICS
td tr ts tf *Pulse Width 10 25 225 60 ns ns ns ns
MAX .185 .185 ------.020 .145 .105
MAX 4.70 4.70 -------0.56 3.68 2.67
NOTE
www.mccsemi.com
Revision: 7
1 of 4
2008/02/01
PN2222A
DC Current Gain vs Collector Current 480 400 6 320 hFE 240 160 2 80 0 0.1 1 IC (mA) Collector Current vs Collector-Emitter Voltage 250 IB = 4mA 200 IC - (mA) 150 600 IB = 3mA PD(MAX) - (mW) IB = 2mA 400 800 10 100 10 IC - (mA) 4 VCE = 5.0V 8 35µA 30µ A 25µA 20µ A 15µ A 10µ A 5µ A
MCC
Micro Commercial Components
Collector Current vs Collector-Emitter Voltage
TM
20
30 VCE- (V)
40
50
Maximum Power Dissipation vs Ambient Temperature
TO-92
100
IB = 1mA
200 SOT-23 0
50 0
.5
1.0 VCE - (V)
1.5
2.0
0
50
100 TA - (°C)
150
200
Contours of Constant Gain Bandwidth Product (fT) 24 20 16 VCE - (V) 12 8 4 0 0.1 pF 8 12 10
Input and Output Capacitance vs Reverse Bias Voltage f = 1.0MHz CIB
6 COB 4 2 0.1
10 100 IC - (mA) *50MHz increments from 150 to 250MHz and 260MHz
1.0
1.0 Volts - (V)
10
www.mccsemi.com
2 of 4
Revision: 7
2008/02/01
PN2222A
Base Saturation Voltage vs Collector Current 1.4 1.0 .6 VBE(SAT) - (V) .1 .06 hfe=10 VCE(SAT) - (V) .1 .06 1.4 1.0 .6
MCC
Micro Commercial Components
Collector Saturation Voltage vs Collector Current IC/IB = 10
TM
hfe=20
TA = 125°C TA = 25°C
.01 1.0
10 IC - (mA)
100
1000
.01 0.1
1.0
10 IC - (mA)
100
Base Saturation Voltage vs Collector Current 14 10 6 VBE(SAT) - (V) 1 0.6 TA=25°C TA=125°C 0.1 1.0 10 IC - (mA) 100 1000 .01 VCE(SAT) - (V) .1 IC/IB = 10 4 1 .6
Collector Saturation Voltage vs Collector Current TA = 25°C
hfe=20 .06 hfe=10 0.1 1.0 IC - (mA) 100
10
Switching Times vs Collector Current 1000 IB1 = IB2 = IC/10 ts 100 T - (ns) tr 10 tf td 1.0 1.0 10 IC - (mA) 100
www.mccsemi.com
3 of 4
Revision: 7
2008/02/01
MCC
Device
TM
Micro Commercial Components
Ordering Information
Packing Tape&Reel;2Kpcs/Box Bulk;1Kpcs/Bag (Part Number)-AP (Part Number)-BP
***IMPORTANT NOTICE*** Micro Commercial Components Corp . reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***APPLICATIONS DISCLAIMER*** Products offer by Micro Commercial Components Corp . are not intended for use in Medical, Aerospace or Military Applications.
www.mccsemi.com
Revision: 7
4 of 4
2008/02/01
很抱歉,暂时无法提供与“PN2222A_08”相匹配的价格&库存,您可以联系我们找货
免费人工找货