PN2907A-BP

MCC Micro Commercial Components TM
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# PN2907A Features • • • • • Through Hole Package Capable of 600mWatts of Power Dissipation and 600mA Ic Lead Free Finish/RoHS Compliant ("P" Suffix designates RoHS Compliant. See ordering information) Marking:MPS2907A Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 and MSL Rating 1 PNP General Purpose Amplifier TO-92 A E Electrical Characteristics @ 25°C Unless Otherwise Specified Symbol Parameter Collector-Emitter Breakdown Voltage* (I C=10mAdc, IB=0) Collector-Base Breakdown Voltage (I C=10µ Adc, IE=0) Emitter-Base Breakdown Voltage (I E=10µ Adc, IC=0) Base Cutoff Current (VCE=30Vdc, VBE=0.5Vdc) Collector Cutoff Current (VCE=30Vdc, VBE=0.5Vdc) Collector Cutoff Current (VCB=50Vdc, IE=0) (VCB=50Vdc, IE=0, TA=150°C) DC Current Gain* (I C=0.1mAdc, VCE=10Vdc) (I C=1.0mAdc, VCE=10Vdc) (I C=10mAdc, VCE=10Vdc) (I C=150mAdc, VCE=10Vdc) (I C=500mAdc, VCE=10Vdc) Collector-Emitter Saturation Voltage (I C=150mAdc, IB=15mAdc) (I C=500mAdc, IB=50mAdc) Base-Emitter Saturation Voltage (I C=150mAdc, IB=15mAdc) (I C=500mAdc, IB=50mAdc) Current Gain-Bandwidth Product (I C=50mAdc, VCE=20Vdc, f=100MHz) Output Capacitance (VCB=10Vdc, IE=0, f=100kHz) Input Capacitance (VEB=2.0Vdc, IC=0, f=100kHz) Delay Time (VCC=3.0Vdc, IC=150mAdc, Rise Time IB1=15mAdc) Storage Time (VCC=3.0Vdc, IC=150mAdc Fall Time IB1=IB2=15mAdc) ≤ 300µ s, Duty Cycle ≤ 2.0% Min 60 60 5.0 50 50 Max Units Vdc Vdc Vdc nAdc nAdc µAdc OFF CHARACTERISTICS V(BR)CEO V(BR)CBO V(BR)EBO IBL ICEX ICBO B 0.1 10.0 C ON CHARACTERISTICS hFE 75 100 100 100 50 300 D 0.4 1.6 1.3 2.6 Vdc C Vdc G B E VCE(sat) VBE(sat) SMALL-SIGNAL CHARACTERISTICS fT Ccbo Cibo 200 8.0 30.0 10 40 80 30 MHz pF pF ns ns ns ns DIM A B C D E G DIMENSIONS INCHES MIN .170 .170 .550 .010 .130 .010 MM MIN 4.33 4.30 13.97 0.36 3.30 2.44 SWITCHING CHARACTERISTICS td tr ts tf *Pulse Width MAX .190 .190 .590 .020 .160 .104 MAX 4.83 4.83 14.97 0.56 3.96 2.64 NOTE www.mccsemi.com Revision: 5 1 of 4 2008/02/01 PN2907A DC Current Gain vs Collector Current 300 250 200 hFE 150 100 50 VBE(ON) - (V) 0.6 0.4 T = 100°C A 0.2 0 0.1 VCE = 10V 1.2 1.0 0.8 TA = 25°C MCC Micro Commercial Components Base-Emitter ON Voltage vs Collector Current VCE = 5.0V TM 0.1 1 IC (mA) 10 100 1.0 IC - (mA) 10 100 Pulsed Base Saturation Volatge vs Collector Current -1.5 -1.3 -1.1 VBE(SAT) - (V) -0.9 VCE(SAT) - (V) -.1 IC/IB = 10 -.5 Pulsed Collector Saturation Voltage vs Collector Current IC/IB = 10 -0.7 -.05 -0.5 0 -1.0 -.02 -1.0 -10 -100 IC - (mA) -1000 -10 IC - (mA) -100 -1000 Collector Reverse Current vs Reverse Bias Voltage 100 0 TA = 25°C 100 ICES - (µA) 10 pF Input and Output Capacitances vs Reverse Bias Voltage 20 TA = 25°C 16 CIBO 12 8 4 1.0 0 -10 -20 -30 VCE - (V) -40 -50 -60 0 -0.1 COBO -1.0 Volts - (V) -10 www.mccsemi.com Revision: 5 2 of 4 2008/02/01 PN2907A MCC TM Micro Commercial Components Maximum Power Dissipation vs Ambient Temperature 800 1000 Turn On and Turn Off Times vs Collector Current 600 PD(MAX) - (mW) 400 TO-92 T - (ns) toff 100 ton 10 200 SOT-23 0 0 1.0 10 IB1 = IB2 = IC/10 VCC(OFF) = 15V 100 IC - (mA) Switching Times vs Collector Current 1000 IB1 = IB2 = IC/10 100 VCE - (V) -4 -1.0 -.8 -.4 0 -0.1 1.0 -1.0 -10 IC - (mA) *25MHz increments from 50 to 200MHz -100 td 10 100 IC - (mA) 1000 T - (ns) ts tf tr 1000 50 100 TA - (°C) 150 200 Contours of Constant Gain Bandwidth Product (fT) -10 -8 10 www.mccsemi.com Revision: 5 3 of 4 2008/02/01 MCC Micro Commercial Components TM Ordering Information Device (Part Number)-AP (Part Number)-BP Packing Tape&Reel;2Kpcs/Box Bulk;1Kpcs/Bag ***IMPORTANT NOTICE*** Micro Commercial Components Corp . reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***APPLICATIONS DISCLAIMER*** Products offer by Micro Commercial Components Corp . are not intended for use in Medical, Aerospace or Military Applications. www.mccsemi.com Revision: 5 4 of 4 2008/02/01