R1200F_11

MCC Micro Commercial Components TM
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# R1200F THRU R2000F 500 Milliamp High Voltage Fast Recovery Features • • • • • Lead Free Finish/RoHS Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) High Current Capability Fast Switching For Higher Efficiency Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Silicon Rectifier 1200 to 2000 Volts DO-41 Maximum Ratings • • Operating Temperature: -55 °C to +150°C Storage Temperature: -55°C to +150°C MCC Catalog Number R1200F R1500F R1800F R2000F Device Marking R1200F R1500F R1800F R2000F Maximum Recurrent Peak Reverse Voltage 1200V 1500V 1800V 2000V Maximum RMS Voltage 840V 1050V 1260V 1400V Maximum DC Blocking Voltage 1200V 1500V 1800V 2000V D A Cathode Mark B D Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage R1200F-R1800F R2000F Maximum DC Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance Maximum Reverse Recovery Time Note: IF(AV) IFSM 500mA 30A TA = 50°C 8.3ms, half sine C DIMENSIONS INCHES MIN .166 .080 .028 1.000 MM MIN 4.10 2.00 .70 25.40 VF 2.4V 4.0V 5.0µA 50µA 30pF 500nS IFM = 0.5A; TA = 50°C TA = 25°C TA = 100°C Measured at 1.0MHz, VR=4.0V DIM A B C D MAX .205 .107 .034 --- MAX 5.20 2.70 .90 --- NOTE IR CJ Trr 1. High Temperature Solder Exemption Applied, see EU Directive Annex 7. Revision: A www.mccsemi.com 1 of 3 2011/01/01 R1200F thru R2000F Figure 1 Typical Reverse Characteristics 4 2 1 .8 .6 .4 µA .2 .1 .08 .06 .04 .02 .01 0 TJ = 25°C 20 40 60 Volts Instantaneous Reverse Current - Micro Ampsversus Percent Of Rated Peak Reverse Voltage - Volts 80 100 120 100 mA 200 300 400 500 600 Figure 2 Forward Derating Curve MCC TM Micro Commercial Components Single Phase, Half Wave 60Hz Resistive or Inductive Load 0 25 50 75 °C 100 125 150 0 Average Forward Rectified Current - Amperes ersus v Ambient Temperature - °C IF INSTANTANEOUS FORWARD CURRENT (A) , Figure 3 Typical Forward Characteristics Figure 4 Peak Forward Surge Current 30 25 20 15 Amps 10 5 0 1 2 4 6 8 10 Cycles 20 40 60 80 100 VF , INSTANTANEOUS FORWARD VOLTAGE (V) Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles Revision: A www.mccsemi.com 2 of 3 2011/01/01 MCC Micro Commercial Components TM Ordering Information : Device Part Number-TP Part Number-AP Part Number-BP Packing Tape&Reel: 5Kpcs/Reel Ammo Packing: 5Kpcs/Ammo Box Bulk: 50Kpcs/Carton ***IMPORTANT NOTICE* ** Micro Comme rcial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Comme rcial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Co mponents Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from A uthorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC' s quality standards for handling and storage. MCC will not pro vide any warranty coverage or o ther assistance for parts bought from Unau thorized Source s. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Revision: A www.mccsemi.com 3 of 3 2011/01/01