RS3000

MCC TM Micro Commercial Components
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# RS3000 Features • • • • • • Lead Free Finish/RoHS Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) Low Forward Voltage Drop High Current Capability High Voltage Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 200 Milliamp High Voltage Silicon Rectifier 3000 Volts DO-41 Maximum Ratings • • Operating Temperature: -55 °C to +150°C Storage Temperature: -55°C to +150°C D MCC Part Number RS3000 Device Marking RS3000 Maximum Recurrent Peak Reverse Voltage 3000V Maximum RMS Voltage 2100V Maximum DC Blocking Voltage 3000V A Cathode Mark B Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage IF(AV) IFSM 200mA 30A TA = 50°C 8.3ms, half sine D C DIMENSIONS VF Maximum DC Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance Note: 4.0V IFM = 0.5A; TA = 50°C TA = 25°C TA = 100°C Measured at 1.0MHz, VR=4.0V IR 5.0µA 50µA 30pF DIM A B C D INCHES MIN .166 .080 .028 1.000 MAX .205 .107 .034 --- MM MIN 4.10 2.00 .70 25.40 MAX 5.20 2.70 .90 --- NOTE CJ 1. High Temperature Solder Exemption Applied, see EU Directive Annex 7. Revision: A www.mccsemi.com 1 of 3 2011/01/01 RS3000 MCC Micro Commercial Components Figure 2 Forward Derating Curve 300 250 TM Figure 1 Typical Reverse Characteristics 4 2 1 .8 .6 .4 .2 µA .1 .08 .06 .04 .02 .01 0 TJ = 25°C 20 40 60 Volts Instantaneous Reverse Current - Micro Ampsversus Percent Of Rated Peak Reverse Voltage - Volts 80 100 120 50 mA 100 150 200 Single Phase, Half Wave 60Hz Resistive or Inductive Load 0 0 25 50 75 °C Average Forward Rectified Current - Amperes ersus v Ambient Temperature - °C 100 125 150 Figure 3 Peak Forward Surge Current 30 25 20 15 Amps 10 5 0 1 4 6 8 10 Cycles Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles 20 40 60 80 100 2 Revision: A www.mccsemi.com 2 of 3 2011/01/01 MCC Micro Commercial Components TM Ordering Information : Device Part Number-TP Part Number-AP Part Number-BP Packing Tape&Reel: 5Kpcs/Reel Ammo Packing: 5Kpcs/Ammo Box Bulk: 50Kpcs/Carton ***IMPORTANT NOTICE* ** Micro Comme rcial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Comme rcial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Co mponents Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from A uthorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC' s quality standards for handling and storage. MCC will not pro vide any warranty coverage or o ther assistance for parts bought from Unau thorized Source s. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 3 of 3 2011/01/01