S2A-TP

NOT RECOMMENDED FOR NEW DESIGNS USE S2A-LTP~S2M-LTP SERIES MCC TM Micro Commercial Components S2A THRU S2M
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# Features • • • • • • • • Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) For Surface Mount Applications Low Thermal Resistance Easy Pick And Place High Temp Soldering: 260°C for 10 Seconds At Terminals Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Power Dissipation : 2.35W 2 Amp Silicon Rectifier 50 to 1000 Volts DO-214AA (HSMB) (Round Lead) Maximum Ratings • • • Operating Temperature: -55°C to +150°C Storage Temperature: -55°C to +150°C Thermal Resistance; 16 °C/W Junction To Lead 53°C/W Junction To Ambient MCC Device Maximum Maximum Maximum Catalog Marking Recurrent RMS DC Number Peak Reverse Voltage Blocking Voltage Voltage S2A S2A 50V 35V 50V S2B S2B 100V 70V 100V S2D S2D 200V 140V 200V S2G S2G 400V 280V 400V S2J S2J 600V 420V 600V S2K S2K 800V 560V 800V S2M S2M 1000V 700V 1000V Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward IF(AV) 2.0A TJ = 75°C current Peak Forward Surge IFSM 50A 8.3ms, half sine, Current TJ = 150°C IFM = 2.0A; Maximum VF 1.15V TJ = 25°C* Instantaneous Forward Voltage Maximum DC Reverse Current At IR 10µA TJ = 25°C Rated DC Blocking 50µA TJ = 125°C Voltage Maximum Reverse Trr IF=0.5A, IR=1.0A, 2.0µs Recovery Time Irr=0.25A Typical Junction CJ 30pF Measured at Capacitance 1.0MHz, VR=4.0V *Pulse test: Pulse width 300 µsec, Duty cycle 2% Note: H Cathode Band J A E C D B F G DIMENSIONS DIM A B C D E F G H J INCHES MIN .078 .075 .002 ----.035 .065 .205 .160 .130 MM MIN 1.98 1.90 .05 ----.90 1.65 5.21 4.06 3.30 MAX .116 .089 .008 .02 .055 .091 .224 .180 .155 MAX 2.95 2.25 .20 .51 1.40 2.32 5.69 4.57 3.94 NOTE SUGGESTED SOLDER PAD LAYOUT 0.090" 0.085” 0.070” 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7. Revision: C www.mccsemi.com 1 of 4 2013/12/27 MCC S2A thru S2M Figure 1 Typical Forward Characteristics Micro Commercial Components 20 10 Figure 2 Forward Derating Curve 25°C 2.4 6 2.2 2.0 4 1.8 2 Amps 1.6 1.4 1 1.2 .6 Amps .4 1.0 .8 .6 .2 .4 Single Phase, Half Wave .2 60Hz Resistive .1 .06 0 .04 0 25 50 75 100 125 150 °C Average Forward Rectified Current - Amperesversus Ambient Temperature - °C .02 .01 .6 .4 .8 1.0 1.2 1.4 Volts Instantaneous Forward Current - Amperesversus Instantaneous Forward Voltage - Volts Figure 3 Junction Capacitance 100 60 40 20 pF 10 6 4 2 1 .1 .2 .4 1 Volts 2 4 10 20 40 100 200 400 1000 Junction Capacitance - pFversus Reverse Junction Potential (Applied V + 0.7 Volts) - Volts Revision: C www.mccsemi.com 2 of 4 2013/12/27 TM MCC S2A thru S2M Figure 4 Peak Forward Surge Current Micro Commercial Components 60 Figure 5 New SMB Assembly 50 40 30 Amps 20 Round Lead Process 10 0 1 2 4 6 8 10 20 40 60 80 100 Cycles Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles Revision: C www.mccsemi.com 3 of 4 2013/12/27 TM MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 3Kpcs/Reel ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: C 4 of 4 2013/12/27