S3J-TP

S3A THRU S3M Features • Lead Free Finish/RoHS Compliant (Note1) ("P"Suffix Designates Compliant. See Ordering Information) 3 Amp Silicon Rectifier 50 to 1000 Volts • For Surface Mount Applications • Low Thermal Resistance • High Current Capability • Epoxy Meets UL 94 V-0 Flammability Rating • Moisture Sensitivity Level 1 • Halogen Free Available Upon Request By Adding Suffix "-HF" Maximum Ratings SMC (DO-214AB) • Operating Junction Temperature Range: -55⁰C to +150⁰C • Storage Temperature Range: -55⁰C to +150⁰C • Maximum Thermal Resistance: 47°C/W Junction to Ambient G • Maximum Thermal Resistance: 13°C/W Junction to Lead MCC Part Number Device Marking S3A S3B S3D S3G S3J S3K S3M S3A S3B S3D S3G S3J S3K S3M Maximum Maximum DC Recurrent Maximum Blocking Peak Reverse RMS Voltage Voltage Voltage 50V 100V 200V 400V 600V 800V 1000V 35V 70V 140V 280V 420V 560V 700V H Cathode Mark 50V 100V 200V 400V 600V 800V 1000V A Power Dissipation PD 2.6W Average Forward Current IF(AV) 3.0A TL=105⁰C Peak Forward Surge Current IFSM 100A 8.3ms,Half Sine Maximum Instantaneous Forward Voltage VF 1.2V Maximum DC Reverse Current At Rated DC Blocking Voltage IR Typical Junction Capacitance CJ IFM=3.0A; C E B F DIM Electrical Characteristics @ 25°C Unless Otherwise Specified D A B C D E F G H DIMENSIONS INCHES MM MIN MAX MIN MAX 0.079 0.103 2.00 2.62 0.108 0.128 2.75 3.25 0.002 0.008 0.051 0.203 0.006 0.012 0.152 0.305 0.030 0.060 0.76 1.52 0.305 0.320 7.75 8.13 0.260 0.280 6.60 7.11 0.220 0.245 5.59 6.22 NOTE Suggested Solder Pad Layout TJ=25⁰C* 4.40mm 10μA 250μA TJ=25⁰C; TJ=125⁰C 60pF Measured at 1.0MHz, VR=4.0V 3.30mm 2.50mm *Pulse Test: Pulse Width 200 μsec, Duty Cycle 2% Note: 1. High Temperature Solder Exemptions Applied, See EU Directive Annex 7a. Rev.3-1-01012019 1/3 MCCSEMI.COM S3A THRU S3M Curve Characteristics Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 1 - Forward Current Derating Curve 3.5 120 Peak Forward Surge Current (A) Average Forward Current (A) 3.0 2.5 2.0 1.5 1.0 0.5 0.0 Resistive or Inductive Load 0 25 50 75 100 125 100 80 60 40 20 0 150 8.3 ms Single Half Sine-Wave 1 Number of Cycles at 60 Hz Fig. 4 - Typical Reverse Leakage Characteristics Fig. 3 - Typical Instantaneous Forward Characteristics Instantaneous Reverse Leakage Current (μA) Instantaneous Forward Current (A) 100 10 TJ=25°C 1 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 100 10 TJ=125°C 1 TJ=75°C TJ=25°C 0.1 0.01 20 40 60 80 100 120 Percent of Rated Peak Reverse Voltage (%) Instantaneous Forward Voltage (V) Rev.3-1-01012019 100 10 Lead Temperature (°C) 2/3 MCCSEMI.COM S3A THRU S3M Ordering Information Device Packing Part Number-TP Tape&Reel: 3Kpcs/Reel Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-1-01012019 3/3 MCCSEMI.COM