S3JB-TP

S3AB THRU S3MB Features • • • • • Halogen Free Available Upon Request by Adding Suffix "-HF" Epoxy Meets UL 94 V-0 Flammability Rating Moisture Sensitivity Level 1 Low Forward Voltage Drop and High Current Capability Lead Free Finish/RoHS Compliant (Note1) ("P"Suffix Designates Compliant. See Ordering Information) 3 Amp Glass Passivated Rectifier 50 to 1000 Volts Maximum Ratings • Operating Junction Temperature Range: -55⁰C to +150⁰C • Storage Temperature Range: -55⁰C to +150⁰C • Typical Thermal Resistance: 10°C/W Junction to Lead MCC Part Number Device Marking Maximum Recurrent Peak Reverse Voltage S3AB S3BB S3DB S3GB S3JB S3KB S3MB S3AB S3BB S3DB S3GB S3JB S3KB S3MB 50V 100V 200V 400V 600V 800V 1000V SMB (DO-214AA) Maximum RMS Voltage Maximum DC Blocking Voltage 35V 70V 140V 280V 420V 560V 700V 50V 100V 200V 400V 600V 800V 1000V H J Cathode Mark A E IO TT=75⁰C 100A 8.3ms,Half Sine Wave 200A 1ms,Square Wave IFRM 150A 300us Surge Duration 900 ms Between Surges VF 1.15V Non-Repetitive Peak Forward Surge Current IFSM Repetitive Peak Forward Surge Current Maximum Instantaneous Forward Voltage 3.0A D F B G Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current C DIM A B C D E F G H J DIMENSIONS INCHES MM MIN MAX MIN MAX 0.079 0.103 2.00 2.62 0.075 0.087 1.91 2.21 0.002 0.008 0.05 0.20 0.006 0.012 0.15 0.31 0.030 0.060 0.76 1.52 0.065 0.091 1.65 2.32 0.200 0.220 5.08 5.59 0.160 0.191 4.06 4.85 0.130 0.155 3.30 3.94 NOTE IFM=3.0A; TJ=25⁰C Suggested Solder Pad Layout 1.80mm Maximum DC Reverse Current At Rated DC Blocking Voltage IR Typical Junction Capacitance CJ 10μA TJ=25⁰C; 250μA TJ=125⁰C 40pF Measured at 1.0MHz VR=4.0V 2.30mm 2.50mm Note:1. High Temperature Solder Exemptions Applied, See EU Directive Annex 7a. Rev.3-1-01292019 1/3 MCCSEMI.COM S3AB THRU S3MB Curve Characteristics Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 1 - Forward Current Derating Curve 3.5 120 Peak Forward Surge Current (A) Average Forward Current (A) 3.0 2.5 2.0 1.5 1.0 0.5 0.0 Resistive or Inductive Load 0 25 50 75 100 125 100 80 60 40 20 0 150 8.3 ms Single Half Sine-Wave 1 Number of Cycles at 60 Hz Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 4 - Typical Reverse Leakage Characteristics Instantaneous Reverse Leakage Current (μA) Instantaneous Forward Current (A) 100 10 TJ=25°C 1 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 Instantaneous Forward Voltage (V) Rev.3-1-01292019 100 10 Terminal Temperature (°C) 100 10 TJ=125°C 1 TJ=75°C TJ=25°C 0.1 0.01 20 40 60 80 100 120 Percent of Rated Peak Reverse Voltage (%) 2/3 MCCSEMI.COM S3AB THRU S3MB Ordering Information Device Packing Part Number-TP Tape&Reel: 3Kpcs/Reel Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-1-01292019 3/3 MCCSEMI.COM