S5AL-TP

S5AL THRU S5ML Features • Lead Free Finish/RoHS Compliant (Note1) ("P"Suffix Designates Compliant. See Ordering Information) 5 Amp Silicon Rectifier 50 to 1000 Volts • For Surface Mount Applications • High Current Capability • Extremely Low Thermal Resistance • Halogen Free. “Green” Device (Note 2) • Epoxy Meets UL 94 V-0 Flammability Rating • Moisture Sensitivity Level 1 Maximum Ratings • Operating Junction Temperature Range: -55⁰C to +150⁰C • Storage Temperature Range: -55⁰C to +150⁰C SMC (DO-214AB) • Thermal Resistance: 10°C/W Junction to Lead • Thermal Resistance: 18°C/W Junction to Case • Thermal Resistance: 50°C/W Junction to Ambient MCC Part Number Device Marking S5AL S5BL S5DL S5GL S5JL S5KL S5ML G Maximum Maximum DC Recurrent Maximum Blocking Peak Reverse RMS Voltage Voltage Voltage S5AL S5BL S5DL S5GL S5JL S5KL S5ML 50V 100V 200V 400V 600V 800V 1000V 35V 70V 140V 280V 420V 560V 700V H Cathode Mark 50V 100V 200V 400V 600V 800V 1000V A 5.0A TL=75⁰C Peak Forward Surge Current IFSM 100A 8.3ms,Half Sine Maximum Instantaneous Forward Voltage VF 1.15V Maximum DC Reverse Current at Rated DC Blocking Voltage IR 5μA 250μA Typical Junction Capacitance CJ IFM=5.0A; TJ=25⁰C* TJ=25⁰C; TJ=125⁰C B F DIM IF(AV) C E Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current D A B C D E F G H DIMENSIONS INCHES MM MIN MAX MIN MAX 0.079 0.098 2.00 2.50 0.108 0.128 2.75 3.25 0.002 0.008 0.051 0.203 0.006 0.012 0.152 0.305 0.030 0.060 0.76 1.52 0.305 0.320 7.75 8.13 0.260 0.280 6.60 7.11 0.220 0.245 5.59 6.22 NOTE Suggested Solder Pad Layout 4.40mm 40pF Measured at 1.0MHz, VR=4.0V 3.30mm *Pulse Test: Pulse Width 200 μsec, Duty Cycle 2% Note: 2.50mm 1. High Temperature Solder Exemptions Applied, See EU Directive Annex Notes 7a 2. Halogen free "Green” products are defined as those which contain