SF33

MCC Micro Commercial Components TM
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# SF31 THRU SF38 3.0 Amp Super Fast Rectifier 50 to 600 Volts DO-201AD Features • • Epoxy meets UL 94 V-0 flammability rating • Moisture Sensitivity Level 1 • • High Surge Capability Marking: Type Number Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates RoHS Compliant. See ordering information) • • • Maximum Ratings Operating Temperature: -55°C to +125 °C Storage Temperature: -55°C to +150 °C For capacitive load, derate current by 20% Maximum Recurrent Peak Reverse Voltage 50V 100V 150V 200V 300V 400V 600V IF(AV) IFSM Maximum RMS Voltage 35V 70V 105V 140V 210V 280V 420V 3.0 A 100A Maximum DC Blocking Voltage MCC Part Number SF31 SF32 SF33 SF34 SF35 SF36 SF38 D 50V 100V 150V 200V 300V 400V 600V TC = 55°C 8.3ms, half sine A Cathode Mark B D Electrical Characteristics @ 25° C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage SF31-SF34 SF35-SF36 SF38 Maximum DC Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance SF31-SF34 SF35-SF38 Maximum Reverse Recovery Time C VF .95V 1.3V 1.7V 5.0µA 100µA IFM = 3.0A; TC = 25°C DIMENSIONS INCHES MIN MAX .287 .374 .189 .208 .048 .052 1.000 --MM MIN 7.30 4.80 1.20 25.40 MAX 9.50 5.30 1.30 --NOTE IR TC= 25°C TC = 100°C DIM A B C D CJ Trr 100pF 80pF 35ns Measured at 1.0MHz, VR=4.0V IF=0.5A, IR=1.0A, Irr=0.25A Notes:1.High Temperature Solder Exemption Applied, see EU Directive Annex 7. www.mccsemi.com Revision: A 1 of 4 2011/01/01 SF31 thru SF38 Figure 1 Typical Reverse Characteristics MCC TM Micro Commercial Components Figure 2 Typical Forward Characteristics SF31-SF34 SF35 -SF36 1000 10 Tj =100°C uAmps 100 Amps 1 SF38 Tj =25°C 10 0.1 1 20 0.01 40 60 80 100 120 Volts Instantaneous Reverse Current - uAmperes versus Percent of Rated Peak Reverse Voltage - % Figure 3 Forward Derating Curve 0.6 0.8 1.0 Volts 1.2 1.4 1.6 Instantaneous Forward Current - Amperes versus Instantaneous Forward Voltage - Volts 3.0 2.5 2.0 1 .5 Amps 1.0 0 .5 0 Single Phase, Half Wave 60Hz Resistive or Inductive Load 0 25 50 75 °C 100 125 150 Average Forward Rectified Current Per Leg - Amperes versus Case Temperature - °C www.mccsemi.com Revision: A 2 of 4 2011/01/01 SF31 thru SF38 MCC Micro Commercial Components Figure 5 200 180 160 140 120 100 80 60 .1 TM 140 Figure 4 Maximum Non-repetitive Forward Surge Current Typical Junction Capacitance PEAK FORWARD SURGE CURRENT. (A) 100 80 60 40 20 0 8.3ms Single Half Sine Wave JEDEC Method JUNCTION CAPACITANCE.(pF) 120 SF SF 31 ~S F3 35~ 4 SF 38 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz .5 1 2 5 10 20 REVERSE VOLTAGE. (V) 50 100 200 500 1000 Figure 6 Reverse Recovery Time Characteristic And Test Circuit Diagram 50Ω 10Ω trr +0.5A 0 25Vdc Pulse Generator Note 2 1Ω Notes: 1. Rise Time = 7ns max. Input impedance = 1 megohm, 22pF 2. Rise Time = 10ns max. Source impedance = 50 ohms 3. Resistors are non-inductive Oscilloscope Note 1 - 0.25 - 1.0 1 cm Set Time Base for 20/100ns/cm www.mccsemi.com 3 of 4 Revision: A 2011/01/01 MCC Micro Commercial Components TM Ordering Information : Device Part Number-TP Part Number-AP Part Number-BP Packing Tape&Reel: 1.2Kpcs/Reel Ammo Packing: 1.2Kpcs/Ammo Box Bulk: 12Kpcs/Carton ***IMPORTANT NOTICE* ** Micro Comme rcial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Comme rcial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Co mponents Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from A uthorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC' s quality standards for handling and storage. MCC will not pro vide any warranty coverage or o ther assistance for parts bought from Unau thorized Source s. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 4 of 4 2011/01/01