SI2301_11

MCC TM Micro Commercial Components
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# SI2301 Features • • • • • • • • Maximum Ratings @ 25OC Unless Otherwise Specified Symbol VDS ID IDM VGS PD RθJA TJ TSTG Parameter Drain-source Voltage Drain Current-Continuous Drain Current-Pulsed a Gate-source Voltage Total Power Dissipation Thermal Resistance Junction to Ambientb Operating Junction Temperature Storage Temperature Rating -20 -2.8 -10 ±8 1.25 100 -55 to +150 -55 to +150 Unit V A A V W ℃/W ℃ ℃ -20V,-2.8A, RDS(ON)=120mΩ@VGS=-4.5V RDS(ON)=150mΩ@VGS=-2.5V High dense cell design for extremely low RDS(ON) Rugged and reliable High Speed Switching SOT-23 Package Marking Code: S1 Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 P-Channel Enhancement Mode Field Effect Transistor SOT-23 A D 3 1.GATE C B 2. SOURCE 3. DRAIN 1 F E 2 G K H J DIMENSIONS INCHES MIN .110 .083 .047 .035 .070 .018 .0005 .035 .003 .015 MM MIN 2.80 2.10 1.20 .89 1.78 .45 .013 .89 .085 .37 Internal Block Diagram D DIM A B C D E F G H J K MAX .120 .098 .055 .041 .081 .024 .0039 .044 .007 .020 MAX 3.04 2.64 1.40 1.03 2.05 .60 .100 1.12 .180 .51 NOTE G Suggested Solder Pad Layout .031 .800 .035 .900 .079 2.000 inches mm S .037 .950 .037 .950 www.mccsemi.com Revision: A 1 of 5 2011/01/01 MCC TM Micro Commercial Components SI2301 TA = 25 C unless otherwise noted Symbol BVDSS IDSS IGSSF IGSSR VGS(th) RDS(on) gFS Ciss Coss Crss td(on) tr td(off) tf Qg Qgs Qgd IS VSD VGS = 0V, IS = -0.75A VDS = -6V, ID = -2.8A, VGS = -4.5V VDD = -6V, ID = -1A, VGS = -4.5V, RGEN = 6Ω Test Condition VGS = 0V, ID = -250µA VDS = -20V, VGS = 0V VGS = 8V, VDS = 0V VGS = -8V, VDS = 0V VGS = VDS, ID = -250µA VGS = -4.5V, ID = -2.8A VGS = -2.5V, ID = -2.0A VDS = -5V, ID = -2.8A -0.45 80 110 8 880 270 175 11 5 32 23 11 1.5 2.1 -0.75 -1.2 20 10 65 45 14.5 120 150 Min -20 -1 100 -100 Typ Max Units V µA Electrical Characteristics Parameter Off Characteristics Drain-Source Breakdown Voltage Zero Gate Voltage Drain Current Gate Body Leakage Current, Forward Gate Body Leakage Current, Reverse On Characteristics c Gate Threshold Voltage Static Drain-Source On-Resistance Forward Transconductance Dynamic Characteristics Input Capacitance Output Capacitance Reverse Transfer Capacitance Switching Characteristics d Turn-On Delay Time Turn-On Rise Time Turn-Off Delay Time Turn-Off Fall Time Total Gate Charge Gate-Source Charge Gate-Drain Charge Drain-Source Diode Forward Current b Drain-Source Diode Forward Voltage c d nA nA V mΩ mΩ S pF pF pF ns ns ns ns nC nC nC A V VDS = -6V, VGS = 0V, f = 1.0 MHz Drain-Source Diode Characteristics and Maximun Ratings Notes : a.Repetitive Rating : Pulse width limited by maximum junction temperature. b.Surface Mounted on FR4 Board, t < 5 sec. c.Pulse Test : Pulse Width < 300µs, Duty Cycle < 2%. d.Guaranteed by design, not subject to production testing. www.mccsemi.com Revision: A 2 of 5 2011/01/01 MCC TM Micro Commercial Components SI2301 10 25 C 10 -VGS=4.5,4,3,V -ID, Drain Current (A) 8 -VGS=2.5V 6 -ID, Drain Current (A) 8 6 4 -VGS=2.0V 4 2 0 0 1 2 3 -VGS=1.5V 2 TJ=125 C 0 -55 C 1.5 2.0 2.5 3.0 4 5 0.0 0.5 1.0 -VDS, Drain-to-Source Voltage (V) Figure 1. Output Characteristics 1200 1000 800 600 400 200 0 0 2 4 6 8 10 2.2 1.9 1.6 1.3 1.0 0.7 0.4 -100 -VGS, Gate-to-Source Voltage (V) Figure 2. Transfer Characteristics C, Capacitance (pF) Ciss Coss Crss RDS(ON), Normalized RDS(ON), On-Resistance(Ohms) ID=-2.8A VGS=-4.5V -50 0 50 100 150 200 -VDS, Drain-to-Source Voltage (V) Figure 3. Capacitance 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 -50 TJ, Junction Temperature( C) Figure 4. On-Resistance Variation with Temperature -IS, Source-drain current (A) VGS=0V 1 VTH, Normalized Gate-Source Threshold Voltage VDS=VGS ID=-250µA 10 10 0 10 -25 0 25 50 75 100 125 150 -1 0.2 0.4 0.6 0.8 1.0 1.2 TJ, Junction Temperature( C) Figure 5. Gate Threshold Variation with Temperature -VSD, Body Diode Forward Voltage (V) Figure 6. Body Diode Forward Voltage Variation with Source Current www.mccsemi.com Revision: A 3 of 5 2011/01/01 MCC TM Micro Commercial Components SI2301 10 2 -VGS, Gate to Source Voltage (V) 5 V =-6V DS ID=-2.8A 4 -ID, Drain Current (A) 10 1 RDS(ON)Limit 1ms 10ms 100ms 1s DC 3 10 0 2 10 -1 1 0 0 3 6 9 12 10 -2 TA=25 C TJ=150 C Single Pulse -1 10 10 0 10 1 10 2 Qg, Total Gate Charge (nC) Figure 7. Gate Charge -VDS, Drain-Source Voltage (V) Figure 8. Maximum Safe Operating Area VDD t on V IN D VGS RGEN G 90% toff tr 90% RL VOUT td(on) VOUT td(off) 90% 10% tf 10% INVERTED S VIN 50% 10% 50% PULSE WIDTH Figure 9. Switching Test Circuit Figure 10. Switching Waveforms 10 0 r(t),Normalized Effective Transient Thermal Impedance D=0.5 0.2 10 -1 0.1 0.05 0.02 0.01 PDM t1 t2 1. R JA (t)=r (t) * R JA 2. R JA=See Datasheet 3. TJM-TA = P* R JA (t) 4. Duty Cycle, D=t1/t2 10 -2 Single Pulse -3 10 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 Square Wave Pulse Duration (sec) Figure 11. Normalized Thermal Transient Impedance Curve www.mccsemi.com Revision: A 4 of 5 2011/01/01 MCC Micro Commercial Components TM Ordering Information : Device Part Number-TP Packing Tape&Reel: 3Kpcs/Reel ***IMPORTANT NOTICE* ** Micro Comme rcial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Comme rcial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Co mponents Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from A uthorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC' s quality standards for handling and storage. MCC will not pro vide any warranty coverage or o ther assistance for parts bought from Unau thorized Source s. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 5 of 5 2011/01/01