SI3415-TP

MCC R Micro Commercial Components Micro Commercial Components 20736 Marilla Street Chatsworth CA 91311 Phone:(818) 701-4933 Fax: (818) 701-4939 SI3415 Features • • • • • • P-Channel Enhancement Mode Lead Free Finish/RoHS Compliant ("P" Suffix designates RoHS Compliant. See ordering information) Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Excellent R DS(ON) low gate charge,low gate voltages Load switch and in PWM applicatopns Halogen free available upon request by adding suffix "-HF" Field Effect Transistor SOT-23 A D 3 1.GATE Maximum Ratings @ 25OC Unless Otherwise Specified Symbol VDS ID VGS PD R©JA TJ TSTG Parameter Drain-source Voltage Drain Current-Continuous Gate-source Voltage Total Power Dissipation Thermal Resistance Junction to Ambient Operating Junction Temperature Storage Temperature C Rating -20 -4.0 Unit V A f8 0.35 357 -55 to +150 -55 to +150 V W к/W к к 1 F D B 3. DRAIN 2 E H G J K DIMENSIONS DIM A B C D E F G H J K Internal Block Diagram 2. SOURCE INCHES MIN .110 .083 .047 .035 .070 .018 .0005 .035 .003 .015 MAX .120 .098 .055 .041 .081 .024 .0039 .044 .007 .020 MM MIN 2.80 2.10 1.20 .89 1.78 .45 .013 .89 .085 .37 MAX 3.04 2.64 1.40 1.03 2.05 .60 .100 1.12 .180 .51 NOTE Suggested Solder Pad Layout G .031 .800 S Marking：R15 / 3415 .035 .900 .079 2.000 inches mm .037 .950 .037 .950 Revision: C www.mccsemi.com 1 of 4 2017/01/01 MCC Micro Commercial Components SI3415 Electrical characteristics (Ta=25℃ unless otherwise noted) Parameter Symbol Test Condition Min Typ Max Units Static Parameters Drain-source breakdown voltage Gate threshold voltage V(BR) DSS VGS = 0V, ID =-250µA -20 VGS(th) VDS =VGS, ID =-250µA -0.3 Gate-body leakage current IGSS Zero gate voltage drain current IDSS Drain-source on-state resistance(note1) RDS(on) V -1 VDS =0V, VGS =±8V ±10 VDS =0V, VGS =±4.5V ±1 VDS =-16V, VGS =0V -1 VGS =-4.5V, ID =-4A 0.050 VGS =-2.5V, ID =-4A 0.060 VGS =-1.8V, ID =-2A 0.073 Forward transconductance(note2) gFS VDS =-5V, ID =-4A Body diode voltage(note2) VSD IS=-1A,VGS =0V 8 µA Ω S -1 V Dynamic Parameters (note3) Input capacitance Ciss Output capacitance Coss Reverse transfer capacitance Crss Gate resistance Rg 1450 VDS =-10V,VGS =0V,f =1MHz 205 pF 160 VDS =0V,VGS =0V,f =1MHz 6.5 Ω Switching Parameters Total gate charge Qg Gate-Source charge Qgs Gate-drain charge Qgd 4.5 Turn-on delay time (note3) td(on) 9.5 Turn-on rise time(note3) Turn-off delay time(note3) Turn-off fall time(note3) 17.2 VDS =-10V,VGS =-4.5V,ID =-4A 1.3 tr VDS=-10V, VGS=-4.5V 17 td(off) RGEN =3Ω, RL=2.5Ω, 94 tf nC ns 35 Notes: 1. Repetitive rating,pulse width limited by junction temperature. 2. Pulse Test : Pulse width≦300µs, duty cycle≦2%. 3. These parameters have no way to verify. Revision: C www.mccsemi.com 2 of 4 2017/01/01 R MCC SI3415 Micro Commercial Components Typical characteristics Output Characteristics 25 -8.0V Ta=25℃ -3.0V -4.5V -2.5V Ta=25℃ Pulsed Pulsed VGS=-2.0V 8 DRAIN CURRENT ID ID (A) (A) 20 15 DRAIN CURRENT Transfer Characteristics 10 VGS=-1.5V 10 5 6 4 2 0 0 1 2 3 4 DRAIN TO SOURCE VOLTAGE RDS(ON) —— VDS 0 0.0 5 (V) 0.5 1.0 1.5 GATE TO SOURCE VOLTAGE ID RDS(ON) 2.0 (V) VGS —— 60 80 VGS Ta=25℃ Ta=25℃ Pulsed 55 60 VGS=-2.5V 50 RDS(ON) (mΩ) VGS=-1.8V 70 50 ON-RESISTANCE ON-RESISTANCE RDS(ON) (mΩ) Pulsed 45 ID=-4A 40 40 35 VGS=-4.5V 30 30 2 3 4 5 6 DRAIN CURRENT IS —— 7 ID 8 9 10 0 2 4 6 GATE TO SOURCE VOLTAGE (A) 8 VGS 10 (V) VSD 10 Ta=25℃ Pulsed SOURCE CURRENT IS (A) 1 0.1 0.01 1E-3 1E-4 1E-5 0.0 0.2 0.4 0.6 SOURCE TO DRAIN VOLTAGE Revision: C 0.8 VSD 1.0 (V) www.mccsemi.com 3 of 4 2017/01/01 R MCC R Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 3Kpcs/Reel Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Revision: C www.mccsemi.com 4 of 4 2017/01/01