SIL2308-TP

MCC R Micro Commercial Components
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# Features SIL2308 • Lead Free Finish/RoHS Compliant ("P" Suffix designates RoHS Dual Compliant. See ordering information) • Epoxy meets UL 94 V-0 flammability rating N&P-Channel MOSFET • Moisture Sensitivity Level 1 • Low Input/Output Leakage • Marking Code: 2038 Maximum Ratings @ 25OC Unless Otherwise Specified Symbol VDS ID VGS R©JA TJ TSTG Parameter Drain-source Voltage N-Channel P-Channel N-Channel Drain Current-Continuous P-Channel Gate-source Voltage N-Channel P-Channel Thermal Resistance Junction to Ambient Operating Junction Temperature Storage Temperature Rating 20 -20 5 -4 ±8 ±12 277 -55 to +150 -55 to +150 SOT23-6L Unit V A G V 6 к/W к к 5 4 C B 1 Equivalent Circuit 2 3 A H M K J D L DIMENSIONS INCHES Revision: A DIM A B C D G H MIN .012 .051 .087 .106 .122 MM MIN 0.30 1.30 2.20 0.95BSC 1.90BSC 2.70 J K L M .002 .035 .012 .003 .006 .051 .024 .008 0.05 0.90 0.30 0.08 MAX .020 .070 .126 .037 .074 MAX 0.50 1.80 3.20 NOTE 3.10 0.15 1.30 0.60 0.22 w w w.mccsemi.com 1 of 6 2018/05/26 MCC R Micro Commercial Components Electrical characteristics - N-Channel Q1 (TA=25 oC, unless otherwise noted) Parameter Symbol Test Condition Min. Typ. Max. Unit Static Characteristics Drain-source breakdown voltage V(BR)DSS VGS = 0V, ID =250µA Zero gate voltage drain current IDSS VDS =20V,VGS = 0V Gate-body leakage current IGSS VGS =±12V, VDS = 0V Gate threshold voltage VGS(th) VDS =VGS, ID =250µA Drain-source on-resistance RDS(on) Forward transconductance gFS VDS =5V, ID =7A Diode forward voltage VSD IS=1.7A,VGS=0V 20 0.5 V 0.7 1 µA ±0.1 µA 1 V VGS =4.5V, ID =4.5A 38 VGS =2.5V, ID =3.5A 45 9 mΩ S 0.7 1.3 V Dynamic characteristics Total gate charge Qg 11 Gate-source charge Qgs Gate-drain charge Qgd 2.5 Input Capacitance Ciss 800 Output Capacitance Coss Reverse Transfer Capacitance Crss 125 td(on) 18 VDS =10V,VGS =4.5V,ID =4A VDS=8V,VGS=0V,f=1MHz 2.3 155 nC pF Switching Characteristics Turn-on delay time Turn-on rise time Turn-off delay time Turn-off fall time Notes : tr td(off) VDD=10V , VGS=4V , ID=1A RG=10Ω tf 5 43 ns 20 1. Pulse Test : Pulse width≤300μs, duty cycle≤0.5%. 2. Guaranteed by design, not subject to production testing. Revision: A www.mccsemi.com 2 of 6 2018/05/26 MCC R Micro Commercial Components Electrical characteristics - P-Channel Q2 (TA=25 oC, unless otherwise noted) Parameter Symbol Test Condition Min. Typ. Max. Unit Static Characteristics Drain-source breakdown voltage V(BR)DSS VGS = 0V, ID =-250µA -20 V Zero gate voltage drain current IDSS VDS =-16V,VGS = 0V -1 µA Gate-body leakage current IGSS VGS =±12V, VDS = 0V ±100 nA -0.7 -1 V VGS = -4.5V, ID = -0.5A 70 90 VGS = -2.5V, ID = - 0.5A 90 110 Gate threshold voltage VGS(th) Drain-source on-resistance RDS(on) Forward transconductance gFS VDS =VGS, ID = -250µA VDS =-5V, ID = -2A -0.5 5 mΩ S Dynamic characteristics Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Gate resistance Rg Total Gate Charge Qg Gate-Source Charge Qgs Gate-Drain Charge Qgd 1.3 Turn-on delay time td(on) 11 Turn-on rise time tr Turn-off delay time td(off) Turn-off fall time 405 VDS=-10V,VGS=0V,f=1MHz 75 pF 55 f =1MHz 6 3.3 VDS =-10V,VGS =-2.5V,ID=-3A VDD=-10V,VGEN=-4.5V,ID=-1A RL=10Ω,RGEN=1Ω tf Ω 12 0.7 nC 35 ns 30 10 Source-Drain Diode characteristics Diode Forward voltage Notes : VDS VGS =0V, IS=-1.25A -0.7 -1.3 V 1. Pulse Test : Pulse width≤300μs, duty cycle≤0.5%. 2. Guaranteed by design, not subject to production testing. Revision: A www.mccsemi.com 3 of 6 2018/05/26 MCC Micro Commercial Components Typical Characteristics - N-Channel Q1 Revision: A www.mccsemi.com 4 of 6 2018/05/26 R MCC Micro Commercial Components Typical Characteristics - P-Channel Q2 Revision: A www.mccsemi.com 5 of 6 2018/05/26 R MCC R Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 3Kpcs/Reel Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Revision: A www.mccsemi.com 6 of 6 2018/05/26