SK52_08

MCC Micro Commercial Components TM Micro Commercial Components Corp. Products End of Life Notification Issue date: Aug-1th-2008 Last Buy Date :Jan-1th-2009 Description and Purpose: MCC has undergone a review of its core business and products , and determined to discontinue below products: Discontinued Devices SK52 SK53 SK54 SK55 SK56 SK58 SK510 Possible Replacements SK52L SK53L SK54L SK55L SK56L SK58L SK510L www.mccsemi.com MCC Micro Commercial Components TM
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# SK52 THRU SK510 5 Amp Schottky Rectifier 20 to 100 Volts DO-214AB (HSMC) (Round Lead) H • Features Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) For Surface Mount Applications High Current Capability With Low Forward Voltage Easy Pick And Place High Temp Soldering: 260OC for 10 Seconds At Terminals Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 and MSL rating 1 • • • • • Maximum Ratings • • • Operating Temperature: -55 C to +150 C Storage Temperature: -55OC to +150OC Maximum Thermal Resistance; 18OC/W Junction To Lead MCC Part Number SK52 SK53 SK54 SK545 SK55 SK56 SK58 SK510 Maximum Recurrent Peak Reverse Voltage 20V 30V 40V 45V 50V 60V 80V 100V O O O Cathode Band Device Marking SK52 SK53 SK54 SK545 SK55 SK56 SK58 SK510 Maximum RMS Voltage 14V 21V 28V 31.5V 35V 42V 56V 70V Maximum DC Blocking Voltage 20V 30V 40V 45V 50V 60V 80V 100V DIM A B C D E F G H J J A C E F G D B DIMENSIONS INCHES MIN .200 .177 .002 --.047 .168 .309 .239 .234 MAX .214 .203 .005 .02 .056 .179 .322 .243 .240 MM MIN 5.08 4.70 .05 --1.20 4.27 7.85 6.08 5.95 MAX 5.43 5.30 .13 .51 1.42 4.55 8.18 6.18 6.10 NOTE Electrical Characteristics @ 25 C Unless Otherwise Specified Average Forward IF(AV) 5.0A TJ = 120°C Current Peak Forward Surge IFSM 150A 8.3ms, half sine Current Maximum Instantaneous Forward Voltage .55V IFM = 5.0A; SK52- 545 VF .75V TJ = 25OC* SK55- 56 .85V SK58- 510 Maximum DC 1.0mA TJ = 25OC Reverse Current At IR 20mA TJ = 100OC Rated DC Blocking Voltage Typical Junction CJ 200pF Measured at Capacitance 1.0MHz, VR=4.0V *Pulse test: Pulse width 200 usec, Duty cycle 2% Note: 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7. SUGGESTED SOLDER PAD LAYOUT 0.190” 0.200” 0.070” Revision: 5 www.mccsemi.com 1 of 4 2008/02/01 SK52 thru SK510 Figure 1 Typical Forward Characteristics 100 600 400 5 200 100 60 40 20 Amps 10 6 4 2 25OC 1 .6 .4 .2 .1 .2 .4 .6 .8 Volts Instantaneous Forward Current - Amperes versus Instantaneous Forward Voltage - Volts Figure 3 Junction Capacitance 100 0 600 400 200 pF 100 60 40 20 10 .1 .2 .4 1 Volts 2 4 10 20 40 TJ =25°C 1.0 1.2 1.4 0 SK52 -SK545 SK58- SK510 1 3 SK55-SK56 Amps 2 4 6 MCC Micro Commercial Components Figure 2 Forward Derating Curve TM Single Phase, Half Wave 60Hz Resistive or Inductive Load 60 80 100 120 °C Average Forward Rectified Curre nt - Amperes versus Ambient Temperature - °C 140 160 180 100 200 400 1000 Junction Capacitance - pF versus Reverse Voltage - Volts www.mccsemi.com Revision: 5 2 of 4 2008/02/01 SK52 thru SK510 MCC Micro Commercial Components TM Figure 4 Typical Reverse Characteristics 10 6 4 2 1 .6 .4 .2 mAmps .1 0 .06 .04 .02 .01 .006 .004 .002 .001 20 40 60 80 Volts Instantaneous Reverse Leakage Current - MicroAmperes versus Percent Of Rated Peak Reverse Voltage - Volts 100 120 140 SK52 -SK545 SK55 - SK510 1 2 4 6 8 10 20 Cycles Peak Forward Surge Current - Amperes versus Number Of Cycles At 60Hz - Cycles 40 60 80100 Amps 25°C Figure 5 Peak Forward Surge Current 150 125 100 75 50 25 Revision: 5 www.mccsemi.com 3 of 4 2008/02/01 MCC Micro Commercial Components TM Ordering Information Device (Part Number)-TP Packing Tape&Reel;1.5Kpcs/Reel ***IMPORTANT NOTICE*** Micro Commercial Components Corp . reserve the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***APPLICATIONS DISCLAIMER*** Products offer by Micro Commercial Components Corp . are not intended for use in Medical, Aerospace or Military Applications. Revision: 5 www.mccsemi.com 4 of 4 2008/02/01