MCC
Micro Commercial Components
TM
Micro Commercial Components Corp.
Products End of Life Notification
Issue date: Aug-1th-2008 Last Buy Date :Jan-1th-2009 Description and Purpose: MCC has undergone a review of its core business and products , and determined to discontinue below products:
Discontinued Devices SK62 SK63 SK64 SK65 SK66 SK68 SK610
Possible Replacements SK62L SK63L SK64L SK65L SK66L SK68L SK610L
www.mccsemi.com
MCC
TM
Micro Commercial Components
omponents 20736 Marilla Street Chatsworth !"# $
% !"#
SK62 THRU SK610
6 Amp Schottky Rectifier 20 to 100 Volts
DO-214AB (HSMC) (Round Lead)
H
Features
•
• • • •
Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) High Current Capability With Low Forward Voltage Easy Pick And Place High Temp Soldering: 260°C for 10 Seconds At Terminals Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 and MSL rating 1
Operating Temperature: -55°C to +125°C Storage Temperature: -55°C to +150 °C Maximum Thermal Resistance; 18°C/W Junction To Lead Maximum Recurrent Peak Reverse Voltage 20V 30V 40V 45V 50V 60V 80V 100V Maximum RMS Voltage 14V 21V 28V 31.5V 35V 42V 56V 70V Maximum DC Blocking Voltage 20V 30V 40V 45V 50V 60V 80V 100V
DIM A B C D E F G H J
• • •
Maximum Ratings
Cathode Band
MCC Part Number SK62 SK63 SK64 SK645 SK65 SK66 SK68 SK610
Device Marking SK62 SK63 SK64 SK645 SK65 SK66 SK68 SK610
J
A
C
E F G
D
B
DIMENSIONS INCHES MIN .200 .177 .002 --.047 .168 .309 .239 .234 MAX .214 .203 .005 .02 .056 .179 .322 .243 .240 MM MIN 5.08 4.70 .05 --1.20 4.27 7.85 6.08 5.95 MAX 5.43 5.30 .13 .51 1.42 4.55 8.18 6.18 6.10 NOTE
Electrical Characteristics @ 25° C Unless Otherwise Specified
Average Forward IF(AV) 6.0A TL = 95°C Current Peak Forward Surge IFSM 150A 8.3ms, half sine Current Maximum Instantaneous Forward Voltage SK62-645 VF .65V IFM = 6.0A; SK65-610 .85V TJ = 25°C* Maximum DC 1.0mA TJ = 25°C Reverse Current At IR 20mA TJ = 100°C Rated DC Blocking Voltage Typical Junction CJ 200pF Measured at Capacitance 1.0MHz, VR=4.0V *Pulse test: Pulse width 200 µsec, Duty cycle 2%
Note: 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7.
SUGGESTED SOLDER PAD LAYOUT
0.190”
0.200”
0.070”
Revision: 5
www.mccsemi.com
1 of 4
2008/02/01
SK62 thru SK610
Figure 1 Typical Forward Characteristics 1000 600 400 200 100 60 40 20 Amps 10 6 4 2 25°C 1 .6 .4 .2 .1 .2 .4 .6 .8 Volts Instantaneous Forward Current - Amperes versus Instantaneous Forward Voltage - Volts Figure 3 Junction Capacitance 100 0 600 400 200 pF 100 60 40 20 10 .1 .2 .4 1 Volts 2 4 10 20 40 TJ =25°C 1.0 1.2 1.4 SK62 -SK645 SK65-SK610 1 3 Amps 2 5 6
MCC
TM
Micro Commercial Components
Figure 2 Forward Derating Curve
4
Single Phase, Half Wave 60Hz Resistive or Inductive Load 60 80 100 120 °C Average Forward Rectified Current - Amperes versus Lead Temperature - °C 140 160 180
0
100 200
400
1000
Junction Capacitance - pF versus Reverse Voltage - Volts
Revision: 5
www.mccsemi.com
2 of 4
2008/02/01
SK62 thru SK610
MCC
TM
Micro Commercial Components
Figure 4 Typical Reverse Characteristics 10 6 4 2 1 .6 .4 .2 mAmps .1 0 .06 .04 .02 .01 .006 .004 .002 .001 20 40 60 80 Volts Instantaneous Reverse Leakage Current - MicroAmperes versus Percent Of Rated Peak Reverse Voltage - Volts 100 120 140 SK62 -SK645 SK65 - SK610 1 2 4 6 8 10 20 Cycles Peak Forward Surge Current - Amperes versus Number Of Cycles At 60Hz - Cycles 40 60 80100 75°C Amps Figure 5 Peak Forward Surge Current 150 100°C 125 100 75 50 25
25°C
www.mccsemi.com
Revision: 5
3 of 4
2008/02/01
MCC
Micro Commercial Components
TM
Ordering Information
Device (Part Number)-TP Packing Tape&Reel;1.5Kpcs/Reel
***IMPORTANT NOTICE*** Micro Commercial Components Corp . reserve the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***APPLICATIONS DISCLAIMER*** Products offer by Micro Commercial Components Corp . are not intended for use in Medical, Aerospace or Military Applications.
www.mccsemi.com
Revision: 5
4 of 4
2008/02/01
