SLD33A-TP

MCC TM Micro Commercial Components SLD10(C)A THRU SLD60(C)A
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# Features • • • • • • • • 6000 Watt Transient Voltage Suppressors 10 to 60 Volts Automotive Protection Glass Passivated Chip Excellent Clamping Capability Uni and Bidirectional unit Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Halogen free available upon request by adding suffix "-HF" Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates RoHS Compliant. See ordering information) R-6 Maximum Ratings • • Operating Temperature: -55°C to +175°C Storage Temperature: -55°C to +175°C • 6000 W Peak Pulse Power Capability With a 10/1000 us waveform Repetitive Rate(duty cycle)0.01% Parameter Peak power dissipation with a 10/1000ȝs waveform(2) Symbol PPP D Value UNIT 6000 W PPP 2400 Peak power dissipation with a 10/10,000ȝs waveform(2) IPP See Next Peak pulse current wih a 10/1000ȝs (2) Table waveform Power dissipation on infinite heatsink PD at TL = 75 °C 8.0 Peak forward surge current, 8.3 ms IFSM 500 single half sine-wave unidirectional only(3) Maximum instantaneous forward voltage VF 3.5 at 100 A for unidirectional only(3) TJ, TSTG – 55 to +175 Operating junction and storage temperature range A Cathode Mark W B A D W A C V DIMENSIONS °C Note: (1)High Temperature Solder Exemption Applied, see EU Directive Annex 7. DIM A B C D INCHES MIN .340 .340 .048 1.000 MAX .360 .360 .052 --- MM MIN 8.60 8.60 1.20 25.40 MAX 9.10 9.10 1.30 --- NOTE (2)Non-repetitive current pulse per Fig.5 and derated above TA= 25 °C per Fig.1 (3)Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum Revision: A www.mccsemi.com 1 of 4 2016/01/20 MCC SLD10(C)A thru SLD60(C)A Micro Commercial Components Ratings and Characteristics Curves (T A=25ɗ unless otherwise noted) Peak Forward Surge Current, (A) Peak Pulse Derating in Percentage of Peak Power or Current, (%) 500 75 50 25 0 0 25 50 75 100 125 150 175 200 500TJ = TJ max. 8.3 ms Single Half Sine-Wave 450 400 350 300 250 200 10 1 Fig. 2 - Maximum Non-Repetitive Surge Current Fig. 1 - Pulse Derating Curve 10 0 7.0 6.0 5.0 1 6 400 0.6 Peak Power (kW) Steady State Power Dissipation, (W) 8.0 ## 4.0 3.0 2.0 1.0 0.0 0 25 50 75 100 125 150 175 1 200 1 10 Fig. 3 - Steady State Power Derating Curve Fig. 4 - Peak Pulse Power Rating Curve 100000 Tr=10ȝs Peak Value (Ipp) 100 TJ = 25 ƱC Pulse Width (td) is defined as the point where the peak current 0 to 50 % of0 Ipp decays 100 76 1 50 1.5 33 10/1000 ȝsec. Waveform 2 defined23 as by R.E.A. 3 13 4 10 Junction Capacitance,CJ (pF) 0.2 10000 0.5 = Ipp Half Value 2 50 td 0 0 1 2 3 4 Ķ ĵĶı Ĵķııı ķıı Ķ ĵĶı Bi-directional @zero bias Uni-directional @zero bias Uni-directional @VRWM 1000 100 1 Ķ ĵıı IJĹııı ĶĶ Ķ ĵıı IJĵĶıı ķĴ Bi-directional @VRWM 10 100 Reverse Breakdown Voltage,VBR (V) Time , (ms) Fig. 5 - Pulse Waveform Revision: A 100 Pulse Width ,td (ms) Lead Temperature , TL (ɗ) Peak Pulse Current , (% ) 100 Number of Cycles at 60 Hz Ambient Temperature ,TA (ɗ) 70 TM Fig. 6 - Typical Junction Capacitance www.mccsemi.com 2 of 4 2016/01/20 MCC SLD10(C)A thru SLD60(C)A Micro Commercial Components Electrical Characteristics(TA=25ɗ unless otherwise noted) Part Number (Uni) Part Number (Bi) SLD10A SLD11A SLD12A SLD13A SLD14A SLD15A SLD16A SLD17A SLD18A SLD20A SLD22A SLD24A SLD26A SLD28A SLD30A SLD33A SLD36A SLD40A SLD43A SLD48A SLD54A SLD58A SLD60A SLD10CA SLD11CA SLD12CA SLD13CA SLD14CA SLD15CA SLD16CA SLD17CA SLD18CA SLD20CA SLD22CA SLD24CA SLD26CA SLD28CA SLD30CA SLD33CA SLD36CA SLD40CA SLD43CA SLD48CA SLD54CA SLD58CA SLD60CA Note: Breakdown Voltage VBR @IT Min (V) Max (V) IT (mA) 11.80 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.40 25.00 28.90 31.10 33.30 36.70 40.00 44.40 49.00 53.30 60.00 64.40 68.40 13.0 13.5 14.7 15.9 17.2 18.5 19.7 20.9 22.1 24.5 26.9 30.0 31.9 34.4 36.8 40.6 44.2 49.1 54.2 58.9 66.3 71.2 75.6 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Maximum Working Maximum Reverse Peak Reverse Reverse Leakage IR Voltage Surge VRWM Current IPP @VRWM (V) (A) (μA) 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 48 54 58 60 350.0 327.0 300.0 277.0 257.0 245.0 229.0 216.0 204.0 184.0 168.0 153.0 142.0 131.0 123.0 112.0 103.0 92.5 86.00 77.00 68.50 64.00 61.50 Maximum Clamping Voltage VC @IPP (V) 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 77.4 87.1 93.6 96.8 1. Add suffix ' CA ' after part number to specify Bi-directional devices 2. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double 3. Surge current waveform is defined at 10/1000uS waveform Revision: A TM www.mccsemi.com 3 of 4 2016/01/20 MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 500pcs/Reel Part Number-AP Ammo Packing: 450pcs/Ammo Box Part Number-BP Bulk: 4.8Kpcs/Carton Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 4 of 4 2016/01/20