SM5S22A-TP

MCC SM5S14A THRU SM5S36A R Micro Commercial Components
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# Features • • • • • • • • • • • 3600 Watt Transient Voltage Suppressors 14 to 36 Volts Low Leakage Glass passivated junction Excellent clamping capability Uni-directional polarity Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) Halogen free available upon request by adding suffix "-HF" Polarity: Heatsink is anode Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Meet ISO7637-2 5a surge specification AEC-Q101 Qualified DO-218AB A B C D 0D[LPXP5DWLQJ • • Operating Temperature: -55°C to +175°C Storage Temperature: -55°C to +175°C Peak Pulse Current with a 10/1000us waveform IPPM Peak Power Dissipation with a 10/1000us waveform PPPM F G H See Table 1 Note 2 3600W J PPPM Peak Forward Surge Current Power Dissipation On Infinite Heatsink At TL=25oC 2800W Note 2 IFSM 500A Note:3 PD 5.0W 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7. o 2. Non-repetitive current pulse, per Fig.2 and derated above TA=25 C per Fig.1 3. Peak forward surge current 8.3 ms single half sine K L Note 2 DIMENSIONS INCHES Peak Power Dissipation with a 10/10000us waveform Note: E DIM A B C D E F G H J K L MIN 0.590 0.524 0.374 0.323 0.091 0.343 0.382 0.189 0.098 0.067 0.020 MM MAX 0.630 0.539 0.413 0.339 0.114 0.366 0.406 0.205 0.138 0.106 0.028 MIN 15.00 13.30 9.50 8.20 2.30 8.70 9.70 4.80 2.50 1.70 0.50 MAX 16.00 13.70 10.50 8.60 2.90 9.30 10.30 5.20 3.50 2.70 0.70 NOTE SUGGESTED SOLDER PAD LAYOUT 3.3mm 3.0mm 11.0mm 3.5mm 9.5mm 15.8mm www.mccsemi.com Revision: B 1 of 3 2015/03/24 MCC Micro Commercial Components SM5S14A THRU SM5S36A Electrical Characteristics(TA=25 oC unless otherwise noted) Part Number Breakdown Voltage VBR @IT Min (V) 15.60 16.70 17.80 18.90 20.00 22.20 24.40 26.70 28.90 31.10 33.30 36.70 40.00 SM5S14A SM5S15A SM5S16A SM5S17A SM5S18A SM5S20A SM5S22A SM5S24A SM5S26A SM5S28A SM5S30A SM5S33A SM5S36A Maximum Reverse Leakage IR @VRWM (uA) IT (mA) 5 5 5 5 5 5 5 5 5 5 5 5 5 Max (V) 17.20 18.50 19.70 20.90 22.10 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 10 10 10 10 10 10 10 10 10 10 10 10 10 NOTE 1 : Surge current waveform is defined at 10/1000uS waveform Maximum Maximum Working Reverse IR @VRWM Peak Reverse Surge Voltage VRWM TJ=175 Current IPP (V) (uA) (A) (1) 150 14 155.0 150 15 148.0 150 16 138.0 150 17 130.0 150 18 123.0 150 20 111.0 150 22 101.0 150 24 93.0 150 26 86.0 150 28 79.0 150 30 74.0 150 33 68.0 150 36 62.0 Maximum Clamping Voltage VC@IPP (V) 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 AMBIENAVERAGE FORWARD CURRENT, (A) 100 0 Tr=10ȝs 100 25 100 175 0 75 100 Peak Pulse Current , (% ) Peak Pulse Derating in Percentage of Peak Power or Current, (%) Ratings and Characteristics Curves (T A=25ɗ unless otherwise noted) 50 25 Peak Value (Ipp) TJ = 25 ƱC Pulse Width (td) is defined as the point where the peak current decays to 50 % of Ipp Ipp Half Value = 2 50 10/1000 ȝsec. Waveform td 0 0 0 25 50 75 100 125 150 175 200 0 1 2 Time , (ms) Ambient Temperature ,TA (ɗ) Fig. 1 - Pulse Derating Curve 5 1 6600 25 5 10 2800 0 100 1100 10 5200 100 1900 6.0 Peak Power (W) Steady State Power Dissipation, (W) 4 10000 8.0 4.0 2.0 0.0 0 ## 76 50 33 23 13 10 Fig. 2 - Pulse Waveform 0 ## 3 0 0.2 0.5 1 1.5 2 3 4 0 25 50 75 100 125 150 175 200 1000 10 100 Pulse Width ,td (ms) Lead Temperature , TL (ɗ) Fig. 3 - Steady State Power Derating Curve Fig. 4 - Peak Pulse Power Rating Curve www.mccsemi.com Revision: B 2 of 3 2015/03/24 R MCC R Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel;750pcs/Reel Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: B 3 of 3 2015/03/24