SM712H-TP

SM712H Features • Ultra Low Leakage • Low Clamping Voltage • Moisture Sensitivity Level 1 • Epoxy Meets UL 94 V-0 Flammability Rating • Halogen Free Available Upon Request By Adding Suffix "-HF" • Lead Free Finish/RoHS Compliant ("P" Suffix Designates RoHS Compliant. See Ordering Information) ESD Protection Device Maximum Ratings • • Operating Junction Temperature Range: -55°C to +125°C Storage Temperature Range: -55°C to +150°C SOT-23 MCC Part Number Device Marking A D SM712H 3 H712 C Air Contact IEC61000-4-2(ESD) 1 ±30KV ±30KV IEC61000−4−4 (EFT) @5/50ns 40A F B 2 E H G J L IEC61000-4-5(Lightning) Note 1 Peak Pulse Current (8/20μs) IPP Peak Pulse Power (8/20μs) Pin 1 or 2 to Pin 3 PPK 1000W Peak Pulse Power (8/20μs) Pin 3 to Pin 1 or 2 PPK 600W 36A Note 1.Compatible with IEC 61000-4-5 ((Lightning): 36A, 8/20μs - Level 3(Line-Ground) & Level 2 (Line-Line). Internal Structure K DIMENSIONS INCHES MM DIM MIN MAX MIN MAX A 0.110 0.120 2.80 3.04 B 0.083 0.104 2.10 2.64 C 0.047 0.055 1.20 1.40 0.034 0.041 0.85 1.05 D E 0.067 0.083 1.70 2.10 F 0.018 0.024 0.45 0.60 G 0.0004 0.006 0.01 0.15 H 0.035 0.043 0.90 1.10 J 0.003 0.007 0.08 0.18 K 0.012 0.020 0.30 0.51 L 0.007 0.020 0.20 0.50 NOTE Suggested Solder Pad Layout 3 0.031 0.800 0.035 0.900 0.079 2.000 1 2 0.037 0.950 Rev.3-2-07122019 inches mm 1/4 0.037 0.950 MCCSEMI.COM SM712H Electrical Characteristics @ 25°C (Unless Otherwise Specified) Parameter Symbol Reverse Working Voltage VRWM Reverse Breakdown Voltage Reverse Leakage Current Clamping Voltage Junction Capacitance Rev.3-2-07122019 VBR Conditions Max. Units Pin 1 or 2 to Pin 3 12 V Pin 3 to Pin 1 or 2 7 V CJ Typ. IT = 1mA, Pin 1 or 2 to Pin 3 13.3 V IT = 1mA, Pin 3 to Pin 1 or 2 7.5 V VR=VRWM 0.1 μA IPP=1A, tP=8/20μs, Pin 1 or 2 to Pin 3 19 V IPP=1A, tP=8/20μs, Pin 3 to Pin 1 or 2 10 V IPP=25A, tP=8/20μs, Pin 1 or 2 to Pin 3 25 V IPP=25A, tP=8/20μs, Pin 3 to Pin 1 or 2 15 V IPP=36A, tP=8/20μs, Pin 1 or 2 to Pin 3 28 V IPP=36A, tP=8/20μs, Pin 3 to Pin 1 or 2 17 V VR=0V, f=1MHz 75 pF IR VC Min. 2/4 MCCSEMI.COM SM712H Curve Characteristics Fig. 1 - 8 X 20μs Pulse Waveform Fig. 2 - Non-Repetitive Peak Pulse Power 10 Peak value IRSM @ 8μs tr 90 80 Pulse width(tP) is defined 70 as that point where the peak current decay=8μs Peak Pulse Power(kW) Percent of Peak Pulse Current (%) 100 60 Half value IRSM @ 20μs 50 40 30 Pin Pi 3 to Pin1 1 Pin1 Pin Pin1 or 2 t 0.1 tP 20 10 0.01 0.1 0 0 20 40 60 80 1 10 100 1000 Pulse Width(μs) Time (μs) Fig. 3 - Pulse Derating Curve Fig. 4 - Capacitance Characteristics 80 120 Junction Capacitance (pF) Percent of Rated Power (%) 70 100 80 60 40 Pin 3 to Pin 1 or 2 60 50 40 Pin 1 or 2 to Pin 3 30 20 20 10 0 0 0 25 50 75 100 125 150 Ambient Temperature (°C) 0 2 10 12 Reverse Voltage (V) Fig. 5 - Clamping Voltage Characteristics 30 Clamping Voltage (V) 25 Pin 1 or 2 to Pin 3 20 15 10 Pin 3 to Pin 1 or 2 5 TA=25°C tp=8/20μs 0 0 5 10 15 20 25 30 35 40 Reverse Peak Pulse Current (A) Rev.3-2-07122019 3/4 MCCSEMI.COM SM712H Ordering Information Device Packing Part Number-TP Tape&Reel: 3Kpcs/Reel Note : Adding "-HF" Suffix for Halogen Free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-2-07122019 4/4 MCCSEMI.COM