SMBJ5359B

MCC Features • • • • •
  omponents 21201 Itasca Street Chatsworth    !"# $ %    !"# SMBJ5333B THRU SMBJ5388B Low profile package for surface mounting (flat handling surface for accurate placement) Zener Voltage 3.3V to 200V High Surge Current Capability For available tolerances – see note 1 Available on Tape and Reel (see EIA std RS-481) 5 Watt Surface Mount Silicon Zener Diodes Mechanical Data • • • • Standard JEDEC outlines as shown Terminals gull-wing or c-bend (modified J-bend) tin-lead plated and solderable per MIL-STD-750, method 2026 Polarity is indicated by cathode band o Maximum temperature for soldering: 260 C for 10 seconds. DO-214AA (SMBJ) (Round Lead) H Cathode Band Maximum Ratings @ 25 oC Unless Otherwise Specified Forward Voltage at 1.0A Current Steady State Power Dissipation Operating and Storage Temperatures Thermal Resistance VF 1.2 Volts J P(AV) 5 Watts See note 2 -55oC to o + 150 C 25oC/W DIM A B C D E F G H J A C TJ, TSTG E F G D B RθJL DIMENSIONS INCHES MIN .078 .075 .002 ----.035 .065 .205 .160 .130 MM MIN 1.98 1.90 .05 ----.90 1.65 5.21 4.06 3.30 Notes 1. 2. Mounted on copper pads as shown below. Lead temperature at 25oC = TL at mounting plane. Derate o o linearly above 25 C to zero power at 150 C MAX .116 .089 .008 .02 .055 .091 .224 .180 .155 MAX 2.95 2.25 .20 .51 1.40 2.32 5.69 4.57 3.94 NOTE PAD LAYOUT Modified J Bend 0.090" 0.085” 0.070” www.mccsemi.com MCC Features • • • • •
          !"# $ %    !"# SMBG5333B THRU SMBG5388B Low profile package for surface mounting (flat handling surface for accurate placement) Zener Voltage 3.3V to 200V High Surge Current Capability For available tolerances – see note 1 Available on Tape and Reel (see EIA std RS-481) 5 Watt Surface Mount Silicon Zener Diodes Mechanical Data • • • • Standard JEDEC outlines as shown Terminals gull-wing or c-bend (modified J-bend) tin-lead plated and solderable per MIL-STD-750, method 2026 Polarity is indicated by cathode band o Maximum temperature for soldering: 260 C for 10 seconds. o DO-215AA (SMBG) (Round Lead) H Cathode Band J Maximum Ratings @ 25 C Unless Otherwise Specified Forward Voltage at 1.0A Current Steady State Power Dissipation Operating and Storage Temperatures Thermal Resistance VF 1.2 Volts A E F G P(AV) 5 Watts See note 2 -55 C to o + 150 C 25oC/W o C D TJ, TSTG B RθJL DIMENSIONS DIM A B C D E F G H J INCHES MIN .075 .078 .002 --.015 .065 .245 .160 .130 MAX .116 .087 .008 .02 .03 .084 .276 .180 .151 MM MIN 1.90 1.98 .05 --.38 1.65 6.22 4.06 3.30 MAX 2.95 2.21 .20 .51 .76 2.13 7.00 4.57 3.83 NOTE Notes 1. 2. Mounted on copper pads as shown below. Lead temperature at 25oC = TL at mounting plane. Derate o o linearly above 25 C to zero power at 150 C PAD LAYOUT Gull Wing 0.190" 0.125” 0.070” www.mccsemi.com SMB(G or J)5333B thru SMB(G or J)5388B Electrical Characteristics Microsemi Part Number Regulator Voltage (VZ) Test Current (IZT) Maximum Dynamic Impedance (ZZ) (A&B Suffix) MCC Maximum Dynamic Knee Impedance Zzk @ 1.0 mA Maximum Surge Current (IZSM) Maximum Voltage Regulation (∆VZ) (A,B,C,D Suffix) Maximum Reverse Current (IR) @ VR IR Test Voltage (VR) (Non-Suffix & A Suffix) IR Test Voltage (VR) (B,C,D Suffix) Maximum Regulator Current (IZM) (B,C,D Suffix) (A,B,C,D Suffix) Gull-Wing Lead SMBG5333B SMBG5334B SMBG5335B SMBG5336B SMBG5337B SMBG5338B SMBG5339B SMBG5340B SMBG5341B SMBG5342B SMBG5343B SMBG5344B SMBG5345B SMBG5346B SMBG5347B SMBG5348B SMBG5349B SMBG5350B SMBG5351B SMBG5352B SMBG5353B SMBG5354B SMBG5355B SMBG5356B SMBG5357B SMBG5358B SMBG5359B SMBG5360B SMBG5361B SMBG5362B SMBG5363B SMBG5364B SMBG5365B SMBG5366B SMBG5367B SMBG5368B SMBG5369B SMBG5370B SMBG5371B SMBG5372B SMBG5373B SMBG5374B SMBG5375B SMBG5376B SMBG5377B SMBG5378B SMBG5379B SMBG5380B SMBG5381B SMBG5382B SMBG5383B SMBG5384B SMBG5385B SMBG5386B SMBG5387B SMBG5388B C-Bend (Mod – J) SMBJ5333B SMBJ5334B SMBJ5335B SMBJ5336B SMBJ5337B SMBJ5338B SMBJ5339B SMBJ5340B SMBJ5341B SMBJ5342B SMBJ5343B SMBJ5344B SMBJ5345B SMBJ5346B SMBJ5347B SMBJ5348B SMBJ5349B SMBJ5350B SMBJ5351B SMBJ5352B SMBJ5353B SMBJ5354B SMBJ5355B SMBJ5356B SMBJ5357B SMBJ5358B SMBJ5359B SMBJ5360B SMBJ5361B SMBJ5362B SMBJ5363B SMBJ5364B SMBJ5365B SMBJ5366B SMBJ5367B SMBJ5368B SMBJ5369B SMBJ5370B SMBJ5371B SMBJ5372B SMBJ5373B SMBJ5374B SMBJ5375B SMBJ5376B SMBJ5377B SMBJ5378B SMBJ5379B SMBJ5380B SMBJ5381B SMBJ5382B SMBJ5383B SMBJ5384B SMBJ5385B SMBJ5386B SMBJ5387B SMBJ5388B V 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.0 6.2 6.8 7.5 8.2 8.7 9.1 10 11 12 13 14 15 16 17 18 19 20 22 24 25 27 28 30 33 36 39 43 47 51 56 60 62 68 75 82 87 91 100 110 120 130 140 150 160 170 180 190 200 mAdc 380 350 320 290 260 240 220 200 200 175 175 150 150 150 125 125 100 100 100 75 75 70 65 65 65 50 50 50 50 50 40 40 30 30 30 25 25 20 20 20 20 20 15 15 15 12 12 10 10 8.0 8.0 8.0 8.0 5.0 5.0 5.0 OHMS 3.0 2.5 2.0 2.0 2.0 1.5 1.0 1.0 1.0 1.0 1.5 1.5 2.0 2.0 2.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3.0 3.0 3.5 3.5 4.0 5.0 6.0 8.0 10 11 14 20 25 27 35 40 42 44 45 65 75 75 90 125 170 190 230 330 350 380 430 450 480 µA 300 150 50 10 5.0 1.0 1.0 1.0 1.0 10 10 10 10 7.5 5.0 5.0 2.0 1.0 1.0 1.0 1.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 V 1.0 1.0 1.0 1.0 1.0 1.0 2.0 3.0 3.0 4.9 6.4 6.9 6.25 6.6 7.2 8.0 8.6 9.4 10.1 10.8 11.5 12.2 13 13.7 14.4 15.8 17.3 18 19.4 20.1 21.6 23.8 25.9 28.1 31 33.8 36.7 40.3 43 44.6 49 54 59 63 65.5 72 79.2 86.4 93.6 101 108 115 122 130 137 144 V 1.0 1.0 1.0 1.0 1.0 1.0 2.0 3.0 3.0 5.2 5.7 6.2 6.6 6.9 7.6 8.4 9.1 9.9 10.6 11.5 12.2 12.3 13.7 14.4 15.2 16.7 18.2 19 20.6 21.2 22.8 25.1 27.4 29.7 32.7 35.8 38.8 42.5 45.5 47.1 51.7 56 62.2 66 69.2 76 83.6 91.2 93.8 106 114 122 129 137 144 152 mA 1440 1320 1220 1100 1010 930 865 790 765 700 630 580 545 520 475 430 395 265 340 315 295 280 264 250 237 216 198 190 176 170 158 144 132 122 110 100 93 86 79 76 70 63 58 54.5 52.5 47.5 43 39.5 36.6 34 31.5 29.4 28 26.4 25 23.6 OHMS 400 500 500 500 450 400 400 300 200 200 200 200 200 150 125 125 125 100 75 75 75 75 75 75 75 75 100 110 120 130 140 150 160 170 190 210 230 280 350 400 500 620 720 760 760 800 1000 1150 1250 1500 1500 1660 1750 1750 1850 1850 AMPS 20 18.7 17.6 16.4 15.3 14.4 13.4 12.7 12.4 11.5 10.7 10 9.5 9.2 8.6 8.0 7.5 7.0 6.7 6.3 6.0 5.8 5.5 5.3 5.1 4.7 4.4 4.3 4.1 3.9 3.7 3.5 3.3 3.1 2.8 2.7 2.5 2.3 2.2 2.1 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.2 1.1 1.1 1.0 1.0 0.9 0.9 VOLTS 0.85 0.80 0.54 0.49 0.44 0.39 0.25 0.19 0.10 0.15 0.15 0.20 0.20 0.22 0.22 0.25 0.25 0.25 0.25 0.25 0.30 0.35 0.40 0.40 0.40 0.45 0.55 0.55 0.60 0.60 0.60 0.63 0.65 0.65 0.70 0.80 0.90 1.00 1.20 1.35 1.50 1.60 1.80 2.00 2.20 2.30 2.50 2.50 2.50 2.50 3.00 3.00 3.00 4.00 5.00 5.00 www.mccsemi.com SMB(G or J)5333B thru SMB(G or J)5388B Note 1 Devices listed have a ± 5% tolerance on nominal V Z. The suffix A denotes a ± 20% tolerance, suffix C denotes ± 2%, and suffix D denotes ± 1%. Nominal Zener Voltage (V Z) is read with the device in standard test clips with 3/8 to ½ inch spacing between clip and case of the diode. Before reading, the diode is allowed so stabilize for a period of 40 ± 10 milliseconds at 25°C (+8, -2 °C). The Zener impedance (Z ZT or ZZK is derived from the 60 HZ ac voltage, which results when an ac current having a rms value equal to 10% of the dc zener current (I ZT or IZK) is superimposed on I ZT or IZK respectively. Dynamic impedance variations with other current values are described in Micronote 202. The Maximum Reverse (leakage) Current is specified for devices with ± 20% and ± 10% voltage tolerances on nominal V Z in another column. Note 5 MCC The Maximum Zener Current (I ZM) shown is for ± 5% tolerance devices. I ZM for ± 10% and ± 20% devices can be calculated using the formula: IZM = P V ZM Note 2 Where “V ZM” is VZ at the high end of the voltage tolerance specified and “P” is the rated power of the device. The Surge Current (I ZM) is specified as the maximum peak of a nonrecurring sine wave of 8.3 milliseconds duration. Voltage Regulation ( ∆VZ) is the difference between the voltage measured at 10% and 50% I ZM). Note 3 Note 6 Note 7 Note 4 5335B 5338B 5342B 5344B 5350B 5357B 5365B 5378B 5388B 1 S www.mccsemi.com