SMCJ1.5KE68A-TP

SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A E480232 Features • • • • • • • • 1500 Watt TVS 6.8 to 550 Volts For Surface Mount Application in Order to Optimize Board Space Fast Response Time: Typical Less Than 1.0ps From 0 Volts to VBR Minimum Low Inductance Low Profile Package Excellent Clamping Capability Halogen Free Available Upon Request By Adding Suffix "-HF" Moisture Sensitivity Level 1 Epoxy Meets UL 94 V-0 Flammability Rating • Lead Free Finish/RoHS Compliant (Note1) ("P" Suffix Designates Compliant. See Ordering Information) • For Bidirectional Devices Add “C” To The Suffix of The Part Number: i.e.SMCJ1.5KE6.8CA for 5% Tolerance SMC (DO-214AB) (LEAD FRAME) G Mechanical Data • Polarity: Color Band Denotes Positive End( Cathode) Except Bi-directional Types H • Maximum Soldering Temperature: 260 °C for 10 Seconds Cathode Mark D • Terminals: Solderable Per MIL-STD-750, Method 2026 A C E Maximum Ratings • • • Operating Junction Temperature Range: -55°C to +175°C Storage Temperature Range: -55°C to +175°C Typical Thermal Resistance: 15°C/W Junction to Lead • Typical Thermal Resistance: 75°C/W Junction to Ambient Electrical Characteristics @ 25°C Unless Otherwise Specified Peak Pulse Power Surge Current on 10/1000μs Waveform IPP See the Table Note 2 Peak Pulse Power Dissipation PPP 1500W(Min) Note 2,3 Note: B F DIM A B C D E F G H DIMENSIONS INCHES MM MIN MAX MIN MAX 0.079 0.103 2.00 2.62 0.108 0.128 2.75 3.25 0.002 0.008 0.051 0.203 0.006 0.012 0.152 0.305 0.030 0.060 0.76 1.52 0.305 0.320 7.75 8.13 0.260 0.280 6.60 7.11 0.220 0.245 5.59 6.22 NOTE Suggested Solder Pad Layout 1. High Temperature Solder Exemption Applied, see EU Directive Annex 7a. 2. Non-repetitive current pulse, per Fig.3 and derated above TA=25 °C per Fig.4. 4.40mm 3. Mounted on 8.0mm2 copper pads to each terminal. 3.30mm Pin Configuration: Cathode Anode Uni-directional Rev.3-2-03212019 2.50mm Bi-directional 1/5 MCCSEMI.COM SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A Electrical Characteristics @ 25°C Unless Otherwise Specified MCC Part Number Uni-directional SMCJ1.5KE6.8A SMCJ1.5KE7.5A SMCJ1.5KE8.2A SMCJ1.5KE9.1A SMCJ1.5KE10A SMCJ1.5KE11A SMCJ1.5KE12A SMCJ1.5KE13A SMCJ1.5KE15A SMCJ1.5KE16A SMCJ1.5KE18A SMCJ1.5KE20A SMCJ1.5KE22A SMCJ1.5KE24A SMCJ1.5KE27A SMCJ1.5KE30A SMCJ1.5KE33A SMCJ1.5KE36A SMCJ1.5KE39A SMCJ1.5KE43A SMCJ1.5KE47A SMCJ1.5KE51A SMCJ1.5KE56A SMCJ1.5KE62A SMCJ1.5KE68A SMCJ1.5KE75A SMCJ1.5KE82A SMCJ1.5KE91A SMCJ1.5KE100A SMCJ1.5KE110A SMCJ1.5KE120A SMCJ1.5KE130A SMCJ1.5KE150A SMCJ1.5KE160A SMCJ1.5KE170A SMCJ1.5KE180A SMCJ1.5KE200A SMCJ1.5KE220A SMCJ1.5KE250A SMCJ1.5KE300A SMCJ1.5KE350A SMCJ1.5KE400A SMCJ1.5KE440A SMCJ1.5KE480A SMCJ1.5KE510A SMCJ1.5KE530A SMCJ1.5KE540A SMCJ1.5KE550A Reverse Stand-Off Voltage VWM(V) 5.80 6.40 7.02 7.78 8.55 9.40 10.20 11.10 12.80 13.60 15.30 17.10 18.80 20.50 23.10 25.60 28.20 30.80 33.30 36.80 40.20 43.60 47.80 53.00 58.10 64.10 70.10 77.80 85.50 94.00 102.00 111.00 128.00 136.00 145.00 154.00 171.00 185.00 214.00 256.00 300.00 342.00 376.00 408.00 434.00 477.00 459.00 495.00 Breakdown Voltage VBR(V) Test Current Max. Clamping Voltage @IPP Peak Pulse Current Reverse Leakage Current @VWM Min 6.45 7.13 7.79 8.65 9.50 10.50 11.40 12.40 14.30 15.20 17.10 19.00 20.90 22.80 25.70 28.50 31.40 34.20 37.10 40.90 44.70 48.50 53.20 58.90 64.60 71.30 77.90 86.50 95.00 105.00 114.00 124.00 143.00 152.00 162.00 171.00 190.00 209.00 237.00 285.00 332.00 380.00 418.00 456.00 485.00 503.50 513.00 522.50 IT(mA) VC(V) IPP(A) ID(µA) 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.5 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 103.0 113.0 125.0 137.0 152.0 165.0 179.0 207.0 219.0 234.0 246.0 274.0 328.0 344.0 414.0 482.0 548.0 602.0 658.0 698.0 725.0 740.0 760.0 144.8 134.5 125.6 113.4 104.8 97.4 91.0 83.5 71.7 67.6 60.3 54.9 49.7 45.8 40.5 36.7 33.3 30.5 28.2 25.6 23.5 21.7 19.7 17.9 16.5 14.8 13.5 12.2 11.1 10.0 9.2 8.5 7.3 6.9 6.5 6.2 5.5 4.6 4.4 3.7 3.2 2.8 2.5 2.3 2.1 2.1 2.0 2.0 1000 500 200 50 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Max 7.14 7.88 8.61 9.55 10.50 11.60 12.60 13.70 15.80 16.80 18.90 21.00 23.10 25.20 28.40 31.50 34.70 37.80 41.00 45.20 49.40 53.60 58.80 65.10 71.40 78.80 86.10 95.50 105.00 116.00 126.00 137.00 158.00 168.00 179.00 189.00 210.00 231.00 263.00 315.00 368.00 420.00 462.00 504.00 535.00 556.50 567.00 577.50 Marking Code 6V8A 7V5A 8V2A 9V1A 10A 11A 12A 13A 15A 16A 18A 20A 22A 24A 27A 30A 33A 36A 39A 43A 47A 51A 56A 62A 68A 75A 82A 91A 100A 110A 120A 130A 150A 160A 170A 180A 200A 220A 250A 300A 350A 400A 440A 480A 510A 530A 540A 550A 1. For Bi-directional type having Vrwm of 10 volts and less, the IR limit is double. 2. The available parts are “A” type only, the parts without A (VBR is ±10%) is not available. Rev.3-2-03212019 2/5 MCCSEMI.COM SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A Electrical Characteristics @ 25°C Unless Otherwise Specified MCC Part Number Bi-directional SMCJ1.5KE6.8CA SMCJ1.5KE7.5CA SMCJ1.5KE8.2CA SMCJ1.5KE9.1CA SMCJ1.5KE10CA SMCJ1.5KE11CA SMCJ1.5KE12CA SMCJ1.5KE13CA SMCJ1.5KE15CA SMCJ1.5KE16CA SMCJ1.5KE18CA SMCJ1.5KE20CA SMCJ1.5KE22CA SMCJ1.5KE24CA SMCJ1.5KE27CA SMCJ1.5KE30CA SMCJ1.5KE33CA SMCJ1.5KE36CA SMCJ1.5KE39CA SMCJ1.5KE43CA SMCJ1.5KE47CA SMCJ1.5KE51CA SMCJ1.5KE56CA SMCJ1.5KE62CA SMCJ1.5KE68CA SMCJ1.5KE75CA SMCJ1.5KE82CA SMCJ1.5KE91CA SMCJ1.5KE100CA SMCJ1.5KE110CA SMCJ1.5KE120CA SMCJ1.5KE130CA SMCJ1.5KE150CA SMCJ1.5KE160CA SMCJ1.5KE170CA SMCJ1.5KE180CA SMCJ1.5KE200CA SMCJ1.5KE220CA SMCJ1.5KE250CA SMCJ1.5KE300CA SMCJ1.5KE350CA SMCJ1.5KE400CA SMCJ1.5KE440CA SMCJ1.5KE480CA SMCJ1.5KE510CA SMCJ1.5KE530CA SMCJ1.5KE540CA SMCJ1.5KE550CA Reverse Stand-Off Voltage VWM(V) 5.80 6.40 7.02 7.78 8.55 9.40 10.20 11.10 12.80 13.60 15.30 17.10 18.80 20.50 23.10 25.60 28.20 30.80 33.30 36.80 40.20 43.60 47.80 53.00 58.10 64.10 70.10 77.80 85.50 94.00 102.00 111.00 128.00 136.00 145.00 154.00 171.00 185.00 214.00 256.00 300.00 342.00 376.00 408.00 434.00 477.00 459.00 495.00 Breakdown Voltage VBR(V) Test Current Max. Clamping Voltage @IPP Peak Pulse Current Reverse Leakage Current @VWM Min 6.45 7.13 7.79 8.65 9.50 10.50 11.40 12.40 14.30 15.20 17.10 19.00 20.90 22.80 25.70 28.50 31.40 34.20 37.10 40.90 44.70 48.50 53.20 58.90 64.60 71.30 77.90 86.50 95.00 105.00 114.00 124.00 143.00 152.00 162.00 171.00 190.00 209.00 237.00 285.00 332.00 380.00 418.00 456.00 485.00 503.50 513.00 522.50 IT(mA) VC(V) IPP(A) ID(µA) 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.5 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 103.0 113.0 125.0 137.0 152.0 165.0 179.0 207.0 219.0 234.0 246.0 274.0 328.0 344.0 414.0 482.0 548.0 602.0 658.0 698.0 725.0 740.0 760.0 144.8 134.5 125.6 113.4 104.8 97.4 91.0 83.5 71.7 67.6 60.3 54.9 49.7 45.8 40.5 36.7 33.3 30.5 28.2 25.6 23.5 21.7 19.7 17.9 16.5 14.8 13.5 12.2 11.1 10.0 9.2 8.5 7.3 6.9 6.5 6.2 5.5 4.6 4.4 3.7 3.2 2.8 2.5 2.3 2.1 2.1 2.0 2.0 1000 500 200 50 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Max 7.14 7.88 8.61 9.55 10.50 11.60 12.60 13.70 15.80 16.80 18.90 21.00 23.10 25.20 28.40 31.50 34.70 37.80 41.00 45.20 49.40 53.60 58.80 65.10 71.40 78.80 86.10 95.50 105.00 116.00 126.00 137.00 158.00 168.00 179.00 189.00 210.00 231.00 263.00 315.00 368.00 420.00 462.00 504.00 535.00 556.50 567.00 577.50 Marking Code 6V8C 7V5C 8V2C 9V1C 10C 11C 12C 13C 15C 16C 18C 20C 22C 24C 27C 30C 33C 36C 39C 43C 47C 51C 56C 62C 68C 75C 82C 91C 100C 110C 120C 130C 150C 160C 170C 180C 200C 220C 250C 300C 350C 400C 440C 480C 510C 530C 540C 550C 1. For Bi-directional type having Vrwm of 10 volts and less, the IR limit is double. 2. The available parts are “A” type only, the parts without A (VBR is ±10%) is not available. Rev.3-2-03212019 3/5 MCCSEMI.COM SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A Curve Characteristics Fig. 1 - Peak Pulse Power Rating Curve Fig. 2 - Typical Junction Capacitance 20000 Non-repetitive pulse Waveform shown in Fig.3 TA= 25 OC Measured at Zero Bias 10000 CJ - Junction Capacitance (pF) PPP - Peak Pulse Power (W) 100000 10000 1000 1000 Measured at Stand-Off, VWM 100 TJ = 25 OC f = 1.0 MHz Vsig = 50 mVp-p Uni-Directional Bi-Directional 100 0.1 1 10 100 1000 10 10000 1 2 Fig. 3 - Pulse Waveform 20 50 100 200 500 120 Peak Value IPPM 100 Peak Pulse Power (PPP) or Current (IPPM) Derating in Percentage (%) TJ= 25 OC Pulse Width(td) is defined as the Point where the Peak Current decays to 50 % of IPPM tr = 10 ȝs IPPM - Peak Pulse Current, % IRSM 10 Fig. 4 - Pulse Derating Curve 150 Half Value - IPP 2 I PPM 50 10/1000 ȝs Waveform as defined by R.E.A. tG 0 5 VWM - Reverse Stand-Off Voltage (V) td - Pulse Width (μs) 0 1 2 3 80 60 40 20 0 4 t - Time (ms) Rev.3-2-03212019 100 0 25 50 75 100 125 150 175 200 TA - Ambient Temperature (OC) 4/5 MCCSEMI.COM SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A Ordering Information Device Packing Part Number-TP Tape&Reel:3Kpcs/Reel Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-2-03212019 5/5 MCCSEMI.COM