SMCJ6.0A-TP

SMCJ5.0(C)A THRU SMCJ440(C)A E480232 Features • • • • • • • • • • • • For Surface Mount Application in Order to Optimize Board Space Built-in Strain Relief Glass Passivated Junction Plastic Package Has Underwrites Laboratory Flammability Temperature Coefficient, Typical Value is 0.1% Fast Response Time: Typical Less than 1ps from 0V to BV Min Typical ID Less than 1μA Above 10V High Temperature Soldering: 260°C/10 Seconds at Terminals Halogen Free. “Green” Device (Note 1) Moisture Sensitivity Level 1 Epoxy Meets UL 94 V-0 Flammability Rating Lead Free Finish/RoHS Compliant (Note2) ("P" Suffix Designates Compliant. See Ordering Information) 1500 Watt TVS 5.0 to 440 Volts SMC (DO-214AB) (LEAD FRAME) Mechanical Data • Polarity: Color Band Denotes Positive End( Cathode) Except Bi-directional Types(Note4) • IEC-61000-4-2 ESD 15kV(Air), 8kV(Contact) G Maximum Ratings • • • • Operating Junction Temperature Range: -55°C to +175°C Storage Temperature Range: -55°C to +175°C Typical Thermal Resistance: 15°C/W Junction to Lead Typical Thermal Resistance: 75°C/W Junction to Ambient H Cathode Mark D A Electrical Characteristics @ 25°C Unless Otherwise Specified C E Peak Pulse Power Surge Current on 10/1000μs Waveform IPPM Peak Pulse Power Dissipation on 10/1000μs Waveform PPPM Power Dissipationon infinite heat sink PD 6.5W Peak forward surge current, 8.3 ms single half sine-wave unidirectional only IFSM 200A Maximum instantaneous forward voltage at 100A for unidirectional only VF See the Table Note 3 1500W Note 3,4,Fig1 TL = 75°C. 3.5V MAX 1.7 TYP /5V MAX 4 TYP Note 6 B F DIM A B C D E F G H DIMENSIONS INCHES MM MIN MAX MIN MAX 0.079 0.103 2.00 2.62 0.108 0.128 2.75 3.25 0.002 0.008 0.051 0.203 0.006 0.012 0.152 0.305 0.030 0.060 0.76 1.52 0.305 0.320 7.75 8.13 0.260 0.280 6.60 7.11 0.220 0.245 5.59 6.22 NOTE Suggested Solder Pad Layout 4.40mm 1. Halogen free "Green” products are defined as those which contain