SMCJ6.5A-TP

SMCJ5.0(C)A THRU SMCJ440(C)A E480232 Features • • • • • • • • • • • • For Surface Mount Application in Order to Optimize Board Space Built-in Strain Relief Glass Passivated Junction Plastic Package Has Underwrites Laboratory Flammability Temperature Coefficient, Typical Value is 0.1% Fast Response Time: Typical Less than 1ps from 0V to BV Min Typical ID Less than 1μA Above 10V High Temperature Soldering: 260°C/10 Seconds at Terminals Halogen Free Available Upon Request By Adding Suffix "-HF" Moisture Sensitivity Level 1 Epoxy Meets UL 94 V-0 Flammability Rating Lead Free Finish/RoHS Compliant (Note1) ("P" Suffix Designates Compliant. See Ordering Information) 1500 Watt TVS 5.0 to 440 Volts SMC (DO-214AB) (LEAD FRAME) Mechanical Data • Polarity: Color Band Denotes Positive End( Cathode) Except Bi-directional Types(Note4) G • Weight: 0.007 ounce, 0.21 gram • IEC-61000-4-2 ESD 15kV(Air), 8kV(Contact) • Standard Packaging: 16mm Tape Per ( EIA 481) H • Terminals: Solderable Per MIL-STD-750, Method 2026 Cathode Mark D Maximum Ratings • • • • A Operating Junction Temperature Range: -55°C to +175°C Storage Temperature Range: -55°C to +175°C Typical Thermal Resistance: 15°C/W Junction to Lead Typical Thermal Resistance: 75°C/W Junction to Ambient E IPPM Peak Pulse Power Dissipation on 10/1000μs Waveform PPPM 1500W Power Dissipationon infinite heat sink PD 6.5W Peak forward surge current, 8.3 ms single half sine-wave unidirectional only IFSM 200A Maximum instantaneous forward voltage at 100A for unidirectional only VF See the Table Note 2 Note 2,3,Fig1 TL = 75°C. B F Electrical Characteristics @ 25°C Unless Otherwise Specified Peak Pulse Power Surge Current on 10/1000μs Waveform C DIM A B C D E F G H DIMENSIONS INCHES MM MIN MAX MIN MAX 0.079 0.103 2.00 2.62 0.108 0.128 2.75 3.25 0.002 0.008 0.051 0.203 0.006 0.012 0.152 0.305 0.030 0.060 0.76 1.52 0.305 0.320 7.75 8.13 0.260 0.280 6.60 7.11 0.220 0.245 5.59 6.22 NOTE Suggested Solder Pad Layout 4.40mm 3.5V MAX 1.7 TYP /5V MAX 4 TYP Note 5 1. High Temperature Solder Exemption Applied, see EU Directive Annex 7a. 2. Non-repetitive current pulse, per Fig.3 and derated above TA=25 °C per Fig.4. 3.30mm 2.50mm 3. Mounted on 8.0mm2copper pads to each terminal. 4. Unidirectional and bidirectional available,for bidirectional devices add “C”suffix to the pn#SMCJ5.0CA 5. VF