SR1010-TP

SR105 THRU SR1010 Features • Guard Ring Protection • Low Power Loss For High Efficiency • Lead Free Finish/RoHS Compliant(Note 1)("P" Suffix Designates Compliant. See Ordering Information) • Epoxy Meets UL 94 V-0 Flammability Rating • Halogen Free Available Upon Request By Adding Suffix "-HF" 1.0 Amp Schottky Barrier Rectifier 50 to 100 Volts Maximum Ratings DO-41 • Operating Junction Temperature Range: -55⁰C to +125⁰C • Storage Temperature Range: -55⁰C to +125⁰C • Maximum Thermal Resistance: 30°C/W Junction To Lead MCC Part Number SR105 SR106 SR108 SR1010 Device Marking Maximum Maximum DC Recurrent Maximum Blocking Peak Reverse RMS Voltage Voltage Voltage 50V 60V 80V 100V SR105 SR106 SR108 SR1010 35V 42V 56V 70V D 50V 60V 80V 100V A Cathode Mark Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current IF(AV) Peak Forward Surge Current IFSM 30A 8.3ms,Half Sine VF 0.70V 0.85V IFM=1.0A; TJ=25⁰C* IR 0.1mA 10mA TJ=25⁰C; TJ=100⁰C Maximum Instantaneous Forward Voltage SR105-SR106 SR108-SR1010 Maximum DC Reverse Current at Rated DC Blocking Voltage 1.0A TA = 75°C C DIM *Pulse test: Pulse width 300 µsec, Duty cycle 2% Note : 1.High Temperature Solder Exemption Applied, See EU Directive Annex 7a. Rev.3-2-12012020 B D 1/3 A B C D DIMENSIONS INCHES MM MIN MAX MIN MAX 0.160 0.205 4.10 5.20 0.080 0.107 2.00 2.70 0.028 0.035 0.71 0.90 1.000 ----- 25.40 ----- NOTE Φ Φ MCCSEMI.COM SR105 THRU SR1010 Curve Characteristics Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current 35 1.0 30 Peak Forward Surge Current (A) Average Forward Current (A) Fig. 1 - Forward Current Derating Curve 1.2 0.8 0.6 0.4 0.2 Resistive or Inductive Load 0.0 0 25 50 100 75 15 10 5 8.3 ms Single Half Sine-Wave 1 100 10 Ambient Temperature (°C) Number of Cycles at 60 Hz Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 4 - Typical Instantaneous Forward Characteristics 5 TJ=125°C 2 Instantaneous Forward Current (A) Instantaneous Forward Current (A) 20 0 125 5 1 0.5 0.2 0.1 TJ=75°C 0.05 TJ=25°C 0.02 0.01 0.0 0.1 0.2 0.3 0.4 SR105-SR106 0.5 0.6 0.7 0.5 0.2 0.1 TJ=75°C 0.05 0.02 SR108-SR1010 TJ=25°C 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Instantaneous Forward Voltage (V) Fig. 5 - Typical Reverse Leakage Characteristics Fig. 6 - Typical Reverse Leakage Characteristics 1.0 Instantaneous Reverse Leakage Current (μA) 1000 TJ=125°C 100 TJ=75°C 10 TJ=25°C 40 60 SR105-SR106 80 100 Percent of Rated Peak Reverse Voltage (%) Rev.3-2-12012020 1 Instantaneous Forward Voltage (V) 1000 1 20 TJ=125°C 2 0.01 0.0 0.8 10000 Instantaneous Reverse Leakage Current (μA) 25 100 TJ=125°C 10 TJ=75°C 1 0.1 TJ=25°C 0.01 20 40 60 SR108-SR1010 80 100 Percent of Rated Peak Reverse Voltage (%) 2/3 MCCSEMI.COM SR105 THRU SR1010 Ordering Information Device Packing (Part Number)-TP Tape&Reel: 5Kpcs/Reel (Part Number)-AP Ammo Packing: 5Kpcs/Ammo Box (Part Number)-BP Bulk:1Kpcs/Box,50Kpcs/Carton Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. Micro Commercial Components Corp. products are sold subject to the general terms and conditions of commercial sale, as published at https://www.mccsemi.com/Home/TermsAndConditions. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-2-12012020 3/3 MCCSEMI.COM