SR3010-TP

SR305 THRU SR3010 Features • Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix Designates Compliant. See Ordering Information) • Low Forward Voltage Drop And Low Switching Noise • High Current Capability And High Surge Current Capability • Epoxy Meets UL 94 V-0 Flammability Rating • Moisture Sensitivity Level 1 • Halogen Free Available Upon Request By Adding Suffix "-HF" 3 Amp Schottky Barrier Rectifier 50 to 100 Volts Maximum Ratings DO-201AD • Operating Junction Temperature Range: -55⁰C to +125⁰C • Storage Temperature Range: -55⁰C to +150⁰C • Typical Thermal Resistance: 30°C/W Junction to Ambient MCC Part Number Device Marking SR305 SR306 SR308 SR3010 SR305 SR306 SR308 SR3010 Maximum Maximum DC Recurrent Maximum Blocking Peak Reverse RMS Voltage Voltage Voltage 50V 60V 80V 100V 35V 42V 56V 70V D 50V 60V 80V 100V A Cathode Mark Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current IF(AV) 3.0A TA=85⁰C Peak Forward Surge Current IFSM 80A 8.3ms,Half Sine VF 0.72V 0.85V IFM=3.0A; TJ=25⁰C (Note 2) Maximum Instantaneous Forward Voltage SR305-SR306 SR308-SR3010 Maximum DC Reverse Current at Rated DC Blocking Voltage Typical Junction Capacitance IR CJ 0.1mA 10mA 200pF C TJ=25⁰C; TJ=100⁰C Measured at 1.0MHz, VR=4.0V Note :1. High Temperature Solder Exemption Applied, see EU Directive Annex 7a. 2. Pulse test: Pulse width 300 µsec, Duty cycle 1% Rev.3-1-01012019 B D 1/3 DIM A B C D DIMENSIONS INCHES MM MIN MAX MIN MAX 0.287 0.374 7.30 9.50 0.189 0.208 4.80 5.30 0.048 0.052 1.20 1.30 1.000 ----- 25.40 ----- NOTE MCCSEMI.COM SR305 THRU SR3010 Curve Characteristics Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 1 - Forward Current Derating Curve 3.5 100 Peak Forward Surge Current (A) Average Forward Current (A) 3.0 2.5 2.0 1.5 1.0 0.5 0.0 80 60 40 20 Resistive or Inductive Load 0 25 50 8.3 ms Single Half Sine-Wave 75 100 125 0 150 10 1 Ambient Temperature (°C) Fig. 4 - Typical Instantaneous Forward Characteristics 20 20 10 10 Instantaneous Forward Current (A) Instantaneous Forward Current (A) Fig. 3 - Typical Instantaneous Forward Characteristics 5 TJ=125°C 2 1 TJ=75°C 0.5 0.2 0.1 0.05 TJ=25°C 0.02 0.01 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 1.2 0.1 0.05 TJ=25°C 0.2 0.3 0.4 0.5 0.6 SR308-SR3010 0.7 0.8 0.9 1.0 Instantaneous Forward Voltage (V) Fig. 5 - Typical Reverse Leakage Characteristics Fig. 6 - Typical Reverse Leakage Characteristics 1.1 100 Instantaneous Reverse Leakage Current (μA) Instantaneous Reverse Leakage Current (μA) 0.2 0.9 1.1 TJ=75°C 0.5 0.01 0.1 1.0 TJ=125°C 1 Instantaneous Forward Voltage (V) TJ=125°C TJ=75°C 10 1 TJ=25°C SR305-SR306 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Rev.3-1-01012019 2 0.02 100 0.1 20 5 SR305-SR306 10000 1000 100 Number of Cycles at 60 Hz TJ=125°C 10 TJ=75°C 1 0.1 TJ=25°C 0.01 20 SR308-SR3010 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) 2/3 MCCSEMI.COM SR305 THRU SR3010 Ordering Information Device Packing Part Number-TP Tape&Reel: 1.2Kpcs/Reel Part Number-AP Ammo Packing: 1.2Kpcs/Ammo Box Part Number-BP Bulk: 12Kpcs/Carton Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-1-01012019 3/3 MCCSEMI.COM