SR506-TP

SR502 THRU SR5010 Features • Halogen Free Available Upon Request By Adding Suffix "-HF" • Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix Designates RoHS Compliant. See Ordering Information) • Low Forward Voltage Drop And Low Switching Noise • High Surge Current Capability And High Current Capability • Epoxy Meets UL 94 V-0 Flammability Rating • Moisture Sensitivity Level 1 5 Amp Schottky Barrier Rectifier 50 to 100 Volts Maximum Ratings • Operating Junction Temperature Range: -55⁰C to +150⁰C DO-201AD • Storage Temperature Range: -55⁰C to +150⁰C • Maximum Thermal Resistance: 18°C/W Junction to Ambient MCC Part Number Device Marking SR502 SR503 SR504 SR505 SR506 SR508 SR5010 SR502 SR503 SR504 SR505 SR506 SR508 SR5010 Maximum Maximum DC Recurrent Maximum Blocking Peak Reverse RMS Voltage Voltage Voltage 20V 30V 40V 50V 60V 80V 100V 14V 21V 28V 35V 42V 56V 70V D 20V 30V 40V 50V 60V 80V 100V A Cathode Mark Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current IF(AV) 5.0A TA=85⁰C Peak Forward Surge Current IFSM 150A 8.3ms,Half Sine VF 0.55V 0.70V 0.85V IFM=5.0A; TJ=25⁰C Maximum DC Reverse Current at Rated DC Blocking Voltage IR 0.1mA TJ=25⁰C; Typical Junction Capacitance CJ Maximum Instantaneous Forward Voltage SR502-SR504 SR505-SR506 SR508-SR5010 200pF B D C DIM Measured at 1.0MHz, VR=4.0V A B C D DIMENSIONS INCHES MM MIN MAX MIN MAX 0.287 0.374 7.30 9.50 0.189 0.208 4.80 5.30 0.048 0.052 1.20 1.30 1.000 ----- 25.40 ----- NOTE Note :1. High Temperature Solder Exemption Applied, see EU Directive Annex 7a. Rev.3-2-12012020 1/4 MCCSEMI.COM SR502 THRU SR5010 Curve Characteristics 175 5 150 Peak Forward Surge Current (A) Average Forward Current (A) Fig. 1- Forward Current Derating Curve 6 4 3 2 1 0 Resistive or Inductive Load 0 25 50 75 100 125 125 100 75 50 25 0 150 Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current 8.3 ms Single Half Sine-Wave 1 Number of Cycles at 60 Hz Fig. 4 - Typical Instantaneous Forward Characteristics 20 20 10 10 Instantaneous Forward Current (A) Instantaneous Forward Current (A) Fig. 3 - Typical Instantaneous Forward Characteristics 5 2 TJ=125°C 1 TJ=75°C 0.5 0.2 0.1 0.05 TJ=25°C 0.02 0.01 0.0 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 2 TJ=125°C 1 TJ=75°C 0.5 0.2 0.1 0.05 0.01 0.0 TJ=25°C 1.0 SR505-SR506 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Instantaneous Forward Voltage (V) Instantaneous Forward Voltage (V) Fig. 5 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Reverse Leakage Characteristics 20 Instantaneous Reverse Leakage Current (μA) 5 2 1 TJ=125°C TJ=75°C 0.5 0.2 0.1 0.05 TJ=25°C 0.02 0.01 0.0 0.1 0.2 0.3 0.4 0.5 SR508-SR5010 0.6 0.7 0.8 0.9 1.0 Instantaneous Forward Voltage (V) Rev.3-2-12012020 1.0 10000 10 Instantaneous Forward Current (A) 5 0.02 SR502-SR504 0.1 100 10 Ambient Temperature (°C) TJ=125°C 1000 TJ=75°C 100 10 TJ=25°C 1 20 SR502-SR504 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) 2/4 MCCSEMI.COM SR502 THRU SR5010 Curve Characteristics Fig. 8 - Typical Reverse Leakage Characteristics Fig. 7 - Typical Reverse Leakage Characteristics Instantaneous Reverse Leakage Current (μA) Instantaneous Reverse Leakage Current (μA) 10000 TJ=125°C 1000 100 TJ=75°C 10 1 20 TJ=25°C 40 60 SR502-SR504 80 TJ=125°C 100 10 TJ=75°C 1 0.1 0.01 20 100 TJ=25°C SR508-SR5010 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Percent of Rated Peak Reverse Voltage (%) Rev.3-2-12012020 1000 3/4 MCCSEMI.COM SR502 THRU SR5010 Ordering Information Device Packing Part Number-TP Tape&Reel: 1.2Kpcs/Reel Part Number-AP Ammo Packing: 1.2Kpcs/Ammo Box Part Number-BP Bulk:500pcs/Box,12Kpcs/Carton Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. Micro Commercial Components Corp. products are sold subject to the general terms and conditions of commercial sale, as published at https://www.mccsemi.com/Home/TermsAndConditions. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-2-12012020 4/4 MCCSEMI.COM