SS1200-LTP

SS1150-L THRU SS1200-L Features • Halogen Free Available Upon Request By Adding Suffix "-HF" • Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix Designates Compliant. See Ordering Information) • Low Forward Voltage • Guard Ring Protection • High Current Capability • Epoxy Meets UL 94 V-0 Flammability Rating • Moisture Sensitivity Level 1 1 Amp Schottky Rectifier 150 to 200 Volts Maximum Ratings • Operating Junction Temperature Range: -50⁰C to +150⁰C • Storage Temperature Range: -65⁰C to +150⁰C • Maximum Thermal Resistance: 50°C/W Junction To Lead MCC Part Number Device Marking SS1150-L SS1200-L S1150 S1200 SMA (DO-214AC) Maximum Maximum DC Recurrent Maximum Blocking Peak Reverse RMS Voltage Voltage Voltage 150V 200V 120V 140V H 150V 200V J Cathode Mark Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current IF(AV) 1.0A Peak Forward Surge Current IFSM 30A Maximum Instantaneous Forward Voltage SS1150 SS1200 C TA=100⁰C E DIM 0.90V 0.92V IFM=1.0A; TJ=25⁰C Maximum DC Reverse Current at Rated DC Blocking Voltage IR 0.05mA TJ=25⁰C; TJ=100⁰C Typical Junction Capacitance CJ 110pF 1mA Measured at 1.0MHz, VR=4.0V Note :1. High Temperature Solder Exemption Applied, See EU Directive Annex 7a. B G 8.3ms,Half Sine VF D F A A B C D E F G H J DIMENSIONS INCHES MM MIN MAX MIN MAX 0.075 0.096 1.90 2.44 0.050 0.064 1.27 1.63 0.002 0.008 0.051 0.203 --- 0.020 --0.51 0.030 0.060 0.76 1.52 0.065 0.091 1.65 2.32 0.189 0.220 4.80 5.59 0.157 0.187 4.00 4.75 0.090 0.115 2.25 2.92 NOTE SUGGESTED SOLDER PAD LAYOUT 2.27mm 2.16mm 1.78mm Rev.3-2-06122019 1/3 MCCSEMI.COM SS1150-L THRU SS1200-L Curve Characteristics 30 1.0 25 Peak Forward Surge Current (A) Average Forward Current (A) Fig. 1 - Forward Current Derating Curve 1.2 0.8 0.6 0.4 0.2 Resistive or Inductive Load 0.0 0 25 50 20 15 10 5 8.3 ms Single Half Sine-Wave 75 100 125 0 150 1 100 10 Ambient Temperature (°C) Number of Cycles at 60 Hz Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 4 - Typical Reverse Leakage Characteristics 10 Instantaneous Reverse Leakage Current (μA) 100 5 Instantaneous Forward Current (A) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current 2 1 TJ=125°C 0.5 0.2 TJ=75°C 0.1 0.05 TJ=25°C 0.02 0.01 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 Instantaneous Forward Voltage (V) Rev.3-2-06122019 TJ=125°C 10 TJ=75°C 1 0.1 TJ=25°C 0.01 0.001 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) 2/3 MCCSEMI.COM SS1150-L THRU SS1200-L Ordering Information Device Packing SS1150-LTP~SS1200-LTP Tape&Reel: 5Kpcs/Reel Note : Adding "-HF" Suffix For Halogen Free, eg. SS1150-LTP-HF~SS1200-LTP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-2-06122019 3/3 MCCSEMI.COM