SS2150-LTP

SS22-L THRU SS220-L Features • Guard Ring Protection • Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix Designates Compliant. See Ordering Information) • Low Forward Voltage • High Current Capability • Halogen Free Available Upon Request By Adding Suffix "-HF" • Epoxy Meets UL 94 V-0 Flammability Rating • Moisture Sensitivity Level 1 2 Amp Schottky Rectifier 20 to 200 Volts Maximum Ratings • • • • • Operating Junction Temperature Range: -55⁰C to +125⁰C Storage Temperature Range: -55⁰C to +150⁰C Typical Thermal Resistance: 75°C/W Junction to Ambient Typical Thermal Resistance: 25°C/W Junction to Case Typical Thermal Resistance: 15°C/W Junction to Lead MCC Part Number Device Marking SS22-L SS23-L SS24-L SS25-L SS26-L SS28-L SS210-L SS2150-L SS220-L SS22 SS23 SS24 SS25 SS26 SS28 SS210 S2150 SMA (DO-214AC) Maximum Maximum DC Recurrent Maximum Blocking Peak Reverse RMS Voltage Voltage Voltage 20V 30V 40V 50V 60V 80V 100V 150V 200V SS220 14V 21V 28V 35V 42V 56V 70V 105V 140V 20V 30V 40V 50V 60V 80V 100V 150V 200V Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current IF(AV) 2.0A TL=100⁰C Peak Forward Surge Current IFSM 50A 8.3ms,Half Sine VF 0.55V 0.70V 0.85V 0.90V IFM=2.0A; TJ=25⁰C* Maximum Instantaneous Forward Voltage SS22-L~SS24-L SS25-L~SS26-L SS28-L~SS210-L SS2150-L~SS220-L Maximum DC Reverse Current at Rated DC Blocking Voltage Typical Junction Capacitance SS22-L~SS28-L SS210-L SS2150-L~SS220-L H J Cathode Mark C E D F A B G DIM A B C D E F G H J DIMENSIONS INCHES MM MIN MAX MIN MAX 0.075 0.096 1.90 2.44 0.050 0.064 1.27 1.63 0.002 0.008 0.051 0.203 --- 0.020 --0.51 0.030 0.060 0.76 1.52 0.065 0.091 1.65 2.32 0.189 0.220 4.80 5.59 0.157 0.187 4.00 4.75 0.090 0.115 2.25 2.92 NOTE SUGGESTED SOLDER PAD LAYOUT 2.27mm IR 0.1mA TJ=25⁰C; 2.16mm CJ 90pF 70pF 40pF Measured at 1.0MHz, VR=4.0V 1.78mm *Pulse test: Pulse width 300 µsec, Duty cycle 2% Note :1. High Temperature Solder Exemption Applied, see EU Directive Annex 7a. Rev.3-4-02242020 1/4 MCCSEMI.COM SS22-L THRU SS220-L Curve Characteristics 60 2.0 50 Peak Forward Surge Current (A) Average Forward Current (A) Fig. 1 - Forward Current Derating Curve 2.4 1.6 1.2 0.8 0.4 Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current 40 30 20 10 Resistive or Inductive Load 0 8.3 ms Single Half Sine-Wave 50 25 75 100 0 125 1 Number of Cycles at 60 Hz Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 4 - Typical Instantaneous Forward Characteristics 5 5 2 2 1 TJ=125°C 0.5 TJ=75°C 0.2 0.1 0.05 TJ=25°C 0.02 0.01 0.0 0.1 0.2 0.3 0.4 SS22-L~SS24-L 0.5 0.6 0.7 1 TJ=75°C 0.2 0.1 0.05 TJ=25°C 0.02 0.01 0.0 0.8 TJ=125°C 0.5 0.1 Instantaneous Forward Voltage (V) 2 2 Instantaneous Forward Current (A) 5 1 TJ=125°C TJ=75°C 0.2 0.1 0.05 TJ=25°C 0.02 0.01 0.2 0.3 0.4 0.5 0.6 SS28-L~SS210-L 0.7 0.8 0.4 0.5 0.6 0.7 0.8 0.9 1 1.0 TJ=125°C 0.5 TJ=75°C 0.2 0.1 0.05 TJ=25°C 0.02 0.01 0.2 0.3 0.4 0.5 0.6 SS2150-L~SS220-L 0.7 0.8 0.9 1.0 Instantaneous Forward Voltage (V) Instantaneous Forward Voltage (V) Rev.3-4-02242020 0.3 Fig. 6 - Typical Instantaneous Forward Characteristics 5 0.5 0.2 SS25-L~SS26-L Instantaneous Forward Voltage (V) Fig. 5 - Typical Instantaneous Forward Characteristics Instantaneous Forward Current (A) 100 10 Lead Temperature (°C) Instantaneous Forward Current (A) Instantaneous Forward Current (A) 0.0 2/4 MCCSEMI.COM SS22-L THRU SS220-L Curve Characteristics Fig. 8 - Typical Reverse Leakage Characteristics Fig. 7 - Typical Reverse Leakage Characteristics 10000 Instantaneous Reverse Leakage Current (μA) TJ=125°C 1000 100 TJ=75°C 10 1 20 TJ=25°C 40 60 SS22-L~SS24-L 100 80 TJ=125°C 100 TJ=75°C 10 1 TJ=25°C SS25-L~SS26-L 0.1 20 100 80 Fig. 10 - Typical Reverse Leakage Characteristics TJ=125°C 1 0.1 TJ=75°C 0.01 TJ=25°C 40 60 SS28-L~SS210-L 80 100 100 10 TJ=100°C 1 TJ=75°C 0.1 TJ=25°C 0.01 20 40 SS2150-L~SS220-L 60 80 100 Percent of Rated Peak Reverse Voltage (%) Percent of Rated Peak Reverse Voltage (%) Fig. 11 - Capacitance Characteristics Fig. 12 - Capacitance Characteristics 240 400 TJ=25°C f=1MHz SS24-L 320 Capacitance Between Terminals (pF) Capacitance Between Terminals (pF) 60 Fig. 9 - Typical Reverse Leakage Characteristics 10 240 160 80 0 40 Percent of Rated Peak Reverse Voltage (%) 100 0.001 20 1000 Percent of Rated Peak Reverse Voltage (%) Instantaneous Reverse Leakage Current (μA) Instantaneous Reverse Leakage Current (μA) Instantaneous Reverse Leakage Current (μA) 10000 0 5 10 15 180 120 60 0 20 0 5 10 15 20 Reverse Voltage (V) Reverse Voltage (V) Rev.3-4-02242020 TJ=25°C f=1MHz SS210-L 3/4 MCCSEMI.COM SS22-L THRU SS220-L Ordering Information Device Packing Tape&Reel: 5Kpcs/Reel SS22-LTP~SS220-LTP Note : Adding "-HF" Suffix For Halogen Free, eg. Part SS22-LTP-HF~SS220-LTP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-4-02242020 4/4 MCCSEMI.COM