UF4003-AP

MCC R Micro Commercial Components UF4001 THRU UF4007
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# Features • • • • • • Ultra Fast Switching Speed For High Efficiency Low Leakage Halogen free available upon request by adding suffix "-HF" Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 1 Amp Ultra Fast Recovery Rectifier 50 to 1000 Volts Lead Free Finish/RoHS Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) Maximum Ratings • • • Operating Temperature: -55°C to +125°C Storage Temperature: -55°C to +150°C Typical Thermal Resistance :60°C/W Junction to Ambient 25°C/W Junction to Lead at 0.375" Lead Length P.C.B. Mounted MCC Device Maximum Maximum Maximum Catalog Marking Recurrent RMS DC Number Peak Reverse Voltage Blocking Voltage Voltage UF4001 UF4001 50V 35V 50V UF4002 100V 70V 100V UF4002 UF4003 UF4003 200V 140V 200V UF4004 400V 280V 400V UF4004 UF4005 UF4005 600V 420V 600V UF4006 UF4006 800V 560V 800V UF4007 UF4007 1000V 700V 1000V DO-41 D A Cathode Mark B Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage UF4001-4003 UF4004 UF4005-4007 Maximum DC Reverse Current At Rated DC Blocking Voltage Maximum Reverse Recovery Time UF4001-4004 UF4005-4007 IF(AV) 1A TA = 55°C IFSM 30A 8.3ms, half sine VF 1. 0 V 1. 3 V 1. 7 V IFM = 1.0A; TA = 25°C IR 5 µA 100µA TA = 25°C TA = 100°C Trr 50ns 75ns IF=0.5A, IR=1.0A, Irr=0.25A D C DIMENSIONS DIM A B C D INCHES MIN .166 .080 .028 1.000 MAX .205 .107 .034 --- MM MIN 4.10 2.00 .70 25.40 MAX 5.20 2.70 .90 --- NOTE Typical Junction Capacitance 20pF Measured at UF4001-4004 CJ 10pF 1.0MHz, VR=4.0V UF4005-4007 *Pulse Test: Pulse Width 300 sec, Duty Cycle 1% Note: 1. High Temperature Solder Exemption Applied, see EU Directive Annex 7. Revision: D www.mccsemi.com 1 of 4 2016/11/29 MCC UF4001 thru UF4007 R AVERAGE FORWARD CURRENT AMPERES FIG.1 - FORWARD CURRENT DERATING CURVE 1.0 0.8 0.6 0.4 0.2 0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 25 50 75 100 125 150 PEAK FORWARD SURGE CURRENT, AMPERES Micro Commercial Components FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 40 30 20 10 Pulse width 8.3ms Single Half-Sine-Wave (JEDEC METHOD) 0 175 1 2 5 AMBIENT TEMPERATURE , C 50 100 FIG.4 - TYPICAL FORWARD CHARACTERISTICS FIG.3 - TYPICAL JUNCTION CAPACITANCE 100 10 INSTANTANEOUS FORWARD CURRENT ,(A) CAPACITANCE , (pF) 20 10 NUMBER OF CYCLES AT 60Hz UF4001 to UF4004 10 UF4005 to UF4007 TJ = 25 C, f= 1MHz UF4004 UF4001 - UF4003 1.0 UF4005 - UF4007 0.1 TJ = 25 C PULSE WIDTH 300us 1.0 0.01 1 4 10 100 0 REVERSE VOLTAGE , VOLTS 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE , VOLTS www.mccsemi.com Revision: D 2 of 4 2016/11/29 MCC UF4001 thru UF4007 R Micro Commercial Components FIG.5 -TYPICAL REVERSE CHARACTERISTICS Instantaneous Reverse Leakage Current (μA) 100 10 Tj =125℃ 1.0 Tj=100℃ 0.1 Tj=25℃ 0.01 0.001 UF4001-UF4003 UF4004 UF4005-UF4007 0 20 40 60 80 100 Percent of Peak Reverse Voltage (%) www.mccsemi.com Revision: D 3 of 4 2016/11/29 MCC R Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 5Kpcs/Reel Part Number-AP Ammo Packing: 5Kpcs/Ammo Box Part Number-BP Bulk: 50Kpcs/Carton Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Revision: D www.mccsemi.com 4 of 4 2016/11/29