UF4007GP-TP

UF4001GP THRU UF4007GP Features • • • • • • Halogen Free Available Upon Request By Adding Suffix "-HF" Ultra Fast Switching Speed For High Efficiency Low Leakage Epoxy Meets UL 94 V-0 Flammability Rating Moisture Sensitivity Level 1 Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix Designates Compliant. See Ordering Information) 1.0 Amp Glass Passivated Ultra Fast Recovery Rectifier 50 to 1000 Volts Maximum Ratings • Operating Junction Temperature Range: -55⁰C to +150⁰C • Storage Temperature Range: -55⁰C to +150⁰C • Typical Thermal Resistance: 40°C/W Junction to Ambient MCC Part Number Device Marking Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage UF4001GP UF4002GP UF4003GP UF4004GP UF4005GP UF4006GP UF4007GP UF4001GP UF4002GP UF4003GP UF4004GP UF4005GP UF4006GP UF4007GP 50V 100V 200V 400V 600V 800V 1000V 35V 70V 140V 280V 420V 560V 700V 50V 100V 200V 400V 600V 800V 1000V DO-41 D Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current IF(AV) 1.0A TA=55⁰C Peak Forward Surge Current IFSM 30A 8.3ms,Half Sine A Maximum Instantaneous Forward Voltage UF4001GP-UF4003GP UF4004GP UF4005GP-UF4007GP Maximum DC Reverse Current At Rated DC Blocking Voltage Maximum Reverse Recovery Time UF4001GP-UF4004GP UF4005GP-UF4007GP B D VF IR trr CJ IFM=1.0A; 1.0V 1.3V 1.7V TJ=25⁰C* 5.0μA TJ=25⁰C; 100μA TJ=100⁰C 50ns 75ns Typical Junction Capacitance UF4001GP-UF4004GP UF4005GP-UF4007GP Cathode Mark 20pF 10pF IF=0.5A; IR=1.0A; IRR=0.25A Measured at 1.0MHz VR=4.0V C DIM A B C D DIMENSIONS INCHES MM MIN MAX MIN MAX 0.160 0.205 4.10 5.20 0.080 0.107 2.00 2.70 0.028 0.035 0.71 0.90 1.000 ----- 25.40 ----- NOTE Φ Φ *Pulse Test: Pulse Width 300μsec, Duty Cycle 1% Note:1. High Temperature Solder Exemptions Applied, See EU Directive Annex 7a. Rev.3-1-01012019 1/3 MCCSEMI.COM UF4001GP THRU UF4007GP Curve Characteristics Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current 1.2 35 1.0 30 Peak Forward Surge Current (A) Average Forward Current (A) Fig. 1 - Forward Current Derating Curve 0.8 0.6 0.4 0.2 0.0 Resistive or Inductive Load 0 25 50 75 100 125 25 20 15 10 5 0 150 8.3 ms Single Half Sine-Wave 1 Number of Cycles at 60 Hz Fig. 4 - Typical Reverse Leakage Characteristics Fig. 3 - Typical Instantaneous Forward Characteristics Instantaneous Forward Current (A) Instantaneous Reverse Leakage Current (μA) 10 5 UF4001GP-4003GP 2 UF4005GP-4007GP 1 0.5 UF4004GP 0.2 0.1 0.05 TJ=25°C 0.02 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 100 TJ=125°C 10 TJ=75°C 1 TJ=25°C 0.1 0.01 20 40 60 80 100 120 Percent of Rated Peak Reverse Voltage (%) Instantaneous Forward Voltage (V) Rev.3-1-01012019 100 10 Ambient Temperature (°C) 2/3 MCCSEMI.COM UF4001GP THRU UF4007GP Ordering Information Device Packing Part Number-TP Tape&Reel: 5Kpcs/Reel Part Number-AP Ammo Packing: 5Kpcs/Ammo Box Part Number-BP Bulk: 50Kpcs/Carton Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-1-01012019 3/3 MCCSEMI.COM