MCC
TM
Micro Commercial Components
omponents 20736 Marilla Street Chatsworth !"# $
% !"#
UML6N
Features
• •
• •
2SC5585 and RB521S-30 are housed independently Lead Free Finish/RoHS Compliant ("P" Suffix designates (5) RoHS Compliant. See ordering information) Epoxy meets UL 94 V-0 flammability rating Moisure Sensitivity Level 1 Di1
ISOLATED
(4)
TRANSISTOR AND DIODES
Tr2
MARKING:L6
(1) (2) (3)
SOT-353
D e
Absolute maximum ratings (Ta=25°C) Di1
Parameter Symbol IO Average revtified forward current Forward current surge peak (60Hz, 1∞) IFSM VR Reverse voltage (DC) Tj Junction temperature Limits 200 1 30 125 Unit mA A V °C
3
2
1
E E1
4
e1
5
Tr2
Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage
Collector current Power dissipation Junction temperature
Symbol VCBO VCEO VEBO IC ICP Pd Tj
Limits 15 12 6 500 1 120 150
Unit V V V mA A mW °C
A1
A2
C
∗1
b L1 L
∗1 Each terminal mounted on a recommended.
DIMENSIONS INCHES MIN MAX --.004 .035 .039 .006 .014 .003 .006 0.79 .087 .045 .053 .085 .096 .026TYP .047 .010 .055 .021REF .018 MM MIN --0.900 0.150 0.080 2.000 1.150 2.150 1.200 0.260 MAX 0.100 1.000 0.350 0.150 2.200 1.350 2.450 1.400 0.460 NOTE
Di1 / Tr2
Parameter Power dissipation Storage temperature Symbol Limits Pd 150 Tstg −55 to +125 Unit mW °C
∗
* Each terminal mounted on a recommended.
DIM A1 A2 b c D E E1 e e1 L L1
0.650TYP 0.525REF
Revision: A
www.mccsemi.com
1 of 4
2011/01/01
UML6N
MCC
TM
Micro Commercial Components
Electrical characteristics (Ta=25°C) Di1
Parameter Forward voltage Reverse current Symbol VF IR Min. − − Typ. 0.40 4.0 Max. 0.50 30 Unit V µA Conditions IF=200mA VR=10V
Tr2
Parameter Collector-emitter breakdown voltage Collector-base breakdown voltage Emitter-base breakdown voltage Collector cut-off current Emitter cut-off current Collector-emitter saturation voltage DC current gain Transition frequency Collector output capacitance Symbol BVCEO BVCBO BVEBO ICBO IEBO VCE(sat) hFE fT Cob Min. 12 15 6 − − − 270 − − Typ. − − − − − 90 − 320 7.5 Max. − − − 100 100 250 680 − − Unit V V V nA nA mV − MHz pF Conditions IC=1mA IC=10µA IE=10µA VCB=15V VEB=6V IC=200mA, IB=10mA VCE=2V, IC=10mA VCE=2V, IE=−10mA, f=100MHz VCB=10V, IE=0mA, f=1MHz
Revision: A
www.mccsemi.com
2 of 4
2011/01/01
Typical Characteristics
Electrical characteristic curves
Di1
1 100m
10m
Ta=125°C
MCC
TM
Micro Commercial Components
FORWARD CURRENT : IF (A)
REVERSE CURRENT : IR (A)
1m
75°C
5° C
12
°C
10m 1m 100µ 10µ 1µ
100µ 10µ 1µ 100n 10n 0 10 20 30 REVERSE VOLTAGE : VR (V)
−25°C
Ta =
75
25
−2 5° C
°C
25°C
0
0.1
0.2
0.3
0.4
0.5
0.6
FORWARD VOLTAGE : VF (V)
Fig.1 Forward characteristics
Fig.2 Reverse characteristics
Tr2
1000
COLLECTOR CURRENT : IC (mA)
COLLECTOR SATURATION VOLTAGE : VCE(sat) (mV)
VCE=2V Pulsed
DC CURRENT GAIN : hFE
1000
Ta=125°C Ta=25°C Ta=−40°C
VCE=2V Pulsed
1000
Ta=25°C Pulsed
100
100
100
Ta=12 5°C
Ta=25° C
C
Ta= −40°
IC/IB=50
10
10
10
IC/IB=20 IC/IB=10
1
1
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1
10
100
1000
1
1
10
100
1000
BASE TO EMITTER VOLTAGE : VBE (V)
COLLECTOR CURRENT : IC (mA)
COLLECTOR CURRENT : IC (mA)
Fig.3 Grounded emitter propagation characteristics
Fig.4 DC current gain vs. collector current
Fig.5 Collector-emitter saturation voltage vs. collector current ( Ι )
COLLECTOR SATURATION VOLTAGE : VCE (sat) (mV)
100 Ta=125°C 25°C −40°C 10
1000
Ta=25°C
Ta=−40°C
TRANSITION FREQUENCY : fT (MHz)
IC/IB=20 Pulsed
BASER SATURATION VOLTAGE : VBE (sat) (mV)
1000
10000
IC/IB=20 Pulsed
1000
VCE=2V Ta=25°C Pulsed
100
Ta=125°C
100
10
1
10
1
10
100
1000
1
10
100
1000
1
1
10
100
1000
COLLECTOR CURRENT : IC (mA)
COLLECTOR CURRENT : IC (mA)
EMITTER CURRENT : IE (mA)
Fig.6 Collector-emitter saturation voltage vs. collector current ( ΙΙ )
Fig.7 Base-emitter saturation voltage vs. collector current
Fig.8 Gain bandwidth product vs. emitter current
Revision: A
www.mccsemi.com
3 of 4
2011/01/01
MCC
Micro Commercial Components
TM
Ordering Information :
Device
Part Number-TP
Packing
Tape&Reel;3Kpcs/Reel
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.
www.mccsemi.com
Revision: A
4 of 4
2011/01/01
很抱歉,暂时无法提供与“UML6N”相匹配的价格&库存,您可以联系我们找货
免费人工找货