23L12810-12

MX23L12810 128M-BIT (8M x 16) MASK ROM (SOP ONLY) FEATURES • Bit organization - 8M x 16 (word mode) • Fast access time - Random access: 100ns (max.) • Current - Operating:50mA - Standby:15uA • Supply voltage - 3.0~3.6V • Package - 44 pin SOP (500mil) • Temperature - 0 ~ 70° C PIN CONFIGURATION 44 SOP(For Word Mode Only) A21 A18 A17 A7 A6 A5 A4 A3 A2 A1 A0 CE VSS OE D0 D8 D1 D9 D2 D10 D3 D11 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 A20 A19 A8 A9 A10 A11 A12 A13 A14 A15 A16 A22 VSS D15 D7 D14 D6 D13 D5 D12 D4 VCC PIN DESCRIPTION Symbol A0~A22 D0~D15 CE OE VCC VSS NC Pin Function Address Inputs Data Outputs Chip Enable Input Output Enable Input Power Supply Pin Ground Pin No Connection 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 MX23L12810 ORDER INFORMATION Part No. MX23L12810MC-10 MX23L12810MC-12 MX23L12810MC-15 Access Time 100ns 120ns 150ns Package 44 pin SOP 44 pin SOP 44 pin SOP P/N:PM0750 REV. 1.9, FEB. 17, 2005 1 MX23L12810 ABSOLUTE MAXIMUM RATINGS Item Supply Voltage Relative to VSS Voltage on any Pin Relative to VSS Ambient Operating Temperature Storage Temperature Symbol VCC VIN Topr Tstg Ratings -0.3V to 4.3V -1.3V to VCC + 2V (Note) 0° C to 70° C -65° C to 125° C Note: Minimum DC voltage on input or I/O pins is -0.5V. During voltage transitions, inputs may undershoot VSS to 1.3V for periods of up to 20ns. Maximum DC voltage on input or I/O pins is VCC+0.5V. During voltage transitions, input may overshoot VCC to VCC+2.0V for periods of up to 20ns. DC CHARACTERISTICS (Ta = 0° C ~ 70° C, VCC = 3.0V~3.6V) Item Output High Voltage Output Low Voltage Input High Voltage Input Low Voltage Input Leakage Current Output Leakage Current Operating Current Standby Current (TTL) Standby Current (CMOS) Input Capacitance Output Capacitance Symbol VOH VOL VIH VIL ILI ILO ICC1 ISTB1 ISTB2 CIN COUT MIN. 2.4V 2.2V -0.3V MAX. 0.4V VCC+0.3V 0.2 x VCC 5uA 5uA 50mA 1mA 15uA 10pF 10pF Conditions IOH = -0.4mA IOL = 1.6mA 0V, VCC 0V, VCC f=5MHz, all outputs open CE = VIH CE>VCC-0.2V Ta = 25° C, f = 1MHZ Ta = 25° C, f = 1MHZ AC CHARACTERISTICS (Ta = 0° C ~ 70° C, VCC = 3.0V~3.6V) Item Read Cycle Time Address Access Time Chip Enable Access Time Output Enable Time Output Hold After Address Output High Z Delay Symbol tRC tAA tACE tOE tOH tHZ 23L12810-10 MIN. MAX. 100ns 100ns 100ns 30ns 0ns 20ns 23L12810-12 MIN. MAX. 120ns 120ns 120ns 50ns 0ns 20ns 23L12810-15 MIN. MAX. 150ns 150ns 150ns 70ns 0ns 20ns Note: Output high-impedance delay (tHZ) is measured from OE or CE going high, and this parameter guaranteed by design over the full voltage and temperature operating range - not tested. P/N:PM0750 REV. 1.9, FEB. 17, 2005 2 MX23L12810 AC Test Conditions Input Pulse Levels Input Rise and Fall Times Input Timing Level Output Timing Level Output Load 0.4V~2.4V 10ns 1.4V 1.4V See Figure IOH (load)=-0.4mA DOUT IOL (load)=1.6mA C