23L25611-10

MX23L25611 FEATURES • Bit organization - 32M x 8 (byte mode) - 16M x 16 (word mode) • Fast access time - Random access: 100ns (max.) - Page access: 30ns (max.) • Page Size - 8 words per page 256M-BIT (16M x 16 / 32M x 8) MASK ROM WITH PAGE MODE (SSOP ONLY) • Current - Operating: 30mA (max.) @ 5MHz - Standby: 15uA (max.) • Supply voltage - 3.0V ~ 3.6V • Package - 70 pin SSOP • Temperature - 0~70° C PIN CONFIGURATION 70 PIN SSOP A21 A20 A18 A17 A7 A6 A5 A4 A3 A2 A1 A0 NC NC NC NC NC NC NC NC NC NC CE# VSS VSS OE# D0 D8 D1 D9 D2 D10 D3 D11 VSS 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 A19 A8 A9 A10 A11 A12 A13 A14 A15 A16 A23 BYTE# NC NC NC NC NC NC NC NC NC NC A22 VSS VSS D15 D7 D14 D6 D13 D5 D12 D4 VCC VCC PIN DESCRIPTION Symbol A0~A23 D0~D14 D15/A-1 CE# OE# BYTE# VCC VSS NC Pin Function Address Inputs Data Outputs D15 (Word Mode) / LSB Address (Byte Mode) Chip Enable Input Output Enable Input Word/Byte Mode Selection Power Supply Pin Ground Pin No Connection MODE SELECTION CE# H L L L P/N:PM0822 OE# X H L L MX23L25611 BYTE# X X H L D15/A-1 X X Output Input D0~D7 High Z High Z D0~D7 D0~D7 D8~D15 High Z High Z D8~D15 High Z Mode Word Byte Power Stand-by Active Active Active REV. 1.3, NOV. 21, 2002 1 MX23L25611 BLOCK DIAGRAM A0/(A-1) A2 A3 A23 CE# BYTE# OE# Address Buffer Memory Array Page Buffer Page Decoder Word/ Byte Output Buffer D0 D15/(D7) ORDER INFORMATION Part No. MX23L25611MC-10 MX23L25611MC-12 Access Time 100ns 120ns Package 70 pin SSOP 70 pin SSOP VCC 3.0V~3.6V (under development) 3.0V~3.6V (under development) ABSOLUTE MAXIMUM RATINGS Item Voltage on any Pin Relative to VSS Ambient Operating Temperature Storage Temperature Symbol VIN Topr Tstg Ratings -0.3V to 3.9V 0° C to 70° C -65° C to 125° C P/N:PM0822 REV. 1.3, NOV. 21, 2002 2 MX23L25611 DC CHARACTERISTICS (Ta = 0° C ~ 70° C, VCC = 3.0V ~ 3.6V) Item Output High Voltage Output Low Voltage Input High Voltage Input Low Voltage Input Leakage Current Output Leakage Current Operating Current Symbol VOH VOL VIH VIL ILI ILO ICC MIN. 2.4V 2.2V -0.3V MAX. 0.4V VCC+0.3V 0.2xVCC 10uA 10uA 30mA 0V, VCC 0V, VCC f=5MHz, all output open CE#=VIL(Chip Enable) OE#=VIH(Output Disabled) Standby Current (TTL) Standby Current (CMOS) Input Capacitance Output Capacitance ISTB1 ISTB2 CIN COUT 1mA 15uA 10pF 10pF CE# = VIH CE# > VCC-0.2V Ta = 25° C, f = 1MHZ Ta = 25° C, f = 1MHZ Conditions IOH = -0.4mA IOL = 1.6mA AC CHARACTERISTICS (Ta = 0° C ~ 70° C, VCC = 3.0V ~ 3.6V) Item Read Cycle Time Address Access Time Chip Enable Access Time Page Mode Access Time Output Enable Time Output Hold After Address Output High Z Delay Symbol tRC tAA tCE tPA tOE tOH tHZ 23L25611-10 MIN. 100ns 0ns MAX. 100ns 100ns 30ns 30ns 20ns 23L25611-12 MIN. 120ns 0 0ns MAX. 120ns 120ns 30ns 30ns 20ns AC Test Conditions Input Pulse Levels Input Rise and Fall Times Input Timing Level Output Timing Level Output Load 0.4V~ 2.4V 10ns 1.5V 1.5V See Figure IOL (load)=1.6mA C< 100pF IOH (load)= -0.4mA DOUT Note:No output loading is present in tester load board. Active loading is used and under software programming control. Output loading capacitance includes load board's and all stray capacitance. P/N:PM0822 REV. 1.3, NOV. 21, 2002 3 MX23L25611 TIMING DIAGRAM RANDOM READ ADD ADD tCE ADD tRC ADD CE# tOE OE# tAA tOH tHZ DATA VALID VALID VALID PAGE READ A3-A23 VALID ADD (A-1), A0, A1, A2 1'st ADD tAA 2'nd ADD tPA VALID VALID 3'rd ADD DATA VALID P/N:PM0822 REV. 1.3, NOV. 21, 2002 4 MX23L25611 PACKAGE INFORMATION P/N:PM0822 REV. 1.3, NOV. 21, 2002 5 MX23L25611 REVISION HISTORY Revision # 1.0 1.1 1.2 Description 1. Changed heading as "RELIMINARY” 2. Modify Pin Configuration--Pin#6~15, Pin#24,25,68,69 1. Modify Pin Configuration--Pin#10~14, 25,26 1. Modify Pin Configuration 2. Modify Operating Current:60mA-->30mA; Standby Currrent(CMOS):50uA-->15uA 3. Modify MODE SELECTION 4. Add 120ns in AC Characteristics 5. Add Order Informaion 6. Modify 70 pin SOP --> 70 pin SSOP Modify Package Information Page P1 P1 P1 P1 P1,2 P1 P3 P2 P1,2,5 P5 Date SEP/06/2001 SEP/07/2001 FEB/01/2002 1.3 NOV/21/2002 P/N:PM0822 REV. 1.3, NOV. 21, 2002 6 MX23L25611 MACRONIX INTERNATIONAL CO., LTD. Headquarters: TEL:+886-3-578-6688 FAX:+886-3-563-2888 Europe Office : TEL:+32-2-456-8020 FAX:+32-2-456-8021 Hong Kong Office : TEL:+86-755-834-335-79 FAX:+86-755-834-380-78 Japan Office : Kawasaki Office : TEL:+81-44-246-9100 FAX:+81-44-246-9105 Osaka Office : TEL:+81-6-4807-5460 FAX:+81-6-4807-5461 Singapore Office : TEL:+65-6346-5505 FAX:+65-6348-8096 Taipei Office : TEL:+886-2-2509-3300 FAX:+886-2-2509-2200 MACRONIX AMERICA, INC. TEL:+1-408-262-8887 FAX:+1-408-262-8810 http : //www.macronix.com MACRONIX INTERNATIONAL CO., LTD. reserves the right to change product and specifications without notice.