1N6382

MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com ICTE5.0 to ICTE15C MPTE-5 to MPTE-45 1N6373 to 1N6381 and 1N6382 to 1N6389 GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR STANDOFF VOLTAGE- 5.0 to 45.0V 1500 Watt Peak Power FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94 V-O • Glass passivated chip junction in Molded Plastic package • 1500W surge capability at 1ms • Excellent clamping capability • Low zener inpedance • Fast response time: typically less than 1.0 ps from 0 volts to BV min. • Typical IR less than 1µA above 10V • High temperature soldering guaranteed: 250°C/10 seconds/ .375", (9.5mm) lead length, 5lbs., (2.3kg) tension • Includes 1N6373 thru 1N6385 MECHANICAL DATA Case: JEDEC DO-201 Molded plastic Terminals: Plated Axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denoted positive end (cathode) except Bipolar Mounting Position: Any Weight: 0.045 ounces, 1.2 grams MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. RATING Peak Pulse Power Dissipation at TA = 25 °C, TP = 1ms (NOTE 1) SYMBOL PPPM IPPM VALUE Minimum 1500 SEE TABLE 1 5.0 200 3.5 -55 +175 UNITS Watts Amps Watts Amps Volt °C Peak Pulse Current of on 10/1000 µs waveform (Note 1) Steady State Power Dissipation at T L = 75°C Lead lengths .375", 9.5mm (Note 2) Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load, (JEDEC Method)(Note 3) Maximum instantaneous forward voltage at 100A for unidirectional only Operatings and Storage Temperature Range PM (AV) IFSM VF TJ, TSTG NOTES: 1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2. 2. Mounted on Copper Pad area of 0.8x0.8" (20x20mm) per Fig.5. 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum. Certified RoHS Compliant UL File # E223026 MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com ICTE5.0 to ICTE15C MPTE-5 to MPTE-45 1N6373 to 1N6381 and 1N6382 to 1N6389 GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR STANDOFF VOLTAGE- 5.0 to 45.0V 1500 Watt Peak Power MINIMUM REVERSE MINIMUM MAXIMUM CLAMPING STANDOFF BREAKDOWN REVERSE VOLTAGE VOLTAGE VOLTAGE LEAKAGE (Vc) @ (VRWM) VBR @ 1mA IR @ Vr Ipp=1A (V) (Volts) (µA) (Volts) MAXIMUM CLAMPING VOLTAGE (Vc) @ Ipp=1A (Volts) MAXIMUM PEAK PULSE CURRENT Ipp (A) Part Numbers ICTE-5* ICTE-8 ICTE-10 ICTE-12 ICTE-15 ICTE-18 ICTE-22 ICTE-36 ICTE-45 ICTE-8C ICTE-10C ICTE-12C ICTE-15C ICTE-18C ICTE-22C ICTE-36C ICTE-45C 1N6373 1N6374 1N6375 1N6376 1N6377 1N6378 1N6379 1N6380 1N6381 1N6382 1N6383 1N6384 1N6385 1N6386 1N6387 1N6388 1N6389 MPTE-5* MPTE-8 MPTE-10 MPTE-12 MPTE-15 MPTE-18 MPTE-22 MPTE-36 MPTE-45 MPTE-8C MPTE-10C MPTE-12C MPTE-15C MPTE-18C MPTE-22C MPTE-36C MPTE-45C 5* 8.0 10.0 12.0 15.0 18.0 22.0 36.0 45.0 8.0 10.0 12.0 15.0 18.0 22.0 36.0 45.0 6.0 9.4 11.7 14.1 17.6 21.2 25.9 42.4 52.9 9.4 11.7 14.1 17.6 21.2 25.9 42.4 52.9 300.0 25.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 50 2.0 2.0 2.0 2.0 2.0 2.0 2.0 7.1 11.3 13.7 16.1 20.1 24.2 29.8 50.6 63.3 11.4 14.1 16.7 20.8 24.8 30.8 50.6 63.3 7.5 11.5 14.1 16.5 20.6 25.2 32.0 54.3 70.0 11.6 14.5 17.1 21.4 25.5 32.0 54.3 70.0 160.0 100.0 90.0 70.0 60.0 50.0 40.0 23.0 19.0 100.0 90.0 70.0 60.0 50.0 40.0 23.0 19.0 *ICTE-5 is not available in Bi-directional. Certified RoHS Compliant UL File # E223026 Suffix 'C' denotes Bi-directional device.