30KPA144CA

MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel: 760-564-8656 • Fax: 760-564-2414 1-800-831-4881 Email: sales@mdesemicondutor.com Web: www.mdesemiconductor.com 30KPA SERIES GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-28.0 TO 400 Volts 30000 Watt Peak Pulse Power FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • Glass passivated junction • 30000W Peak Pulse Power capability on 10/1000 µs waveform • Excellent clamping capability • Repetition rate (duty cycle):0.05% • Low incremental surge resistance • Fast response time: typically less than 1.0 ps from 0 volts to BV • Typical Id less than 1µA above 10V • High temperature soldering guaranteed: 265°C/10 seconds/.375", (9.5mm) lead length, 5lbs., (2.3kg) tension P-600 1.0(25.4) MIN .360(9.1) .340(8.6) DIA .360(9.1) .340(8.6) .052(1.3) .048(1.2) DIA 1.0(25.4) MIN MECHANICAL DATA Case:Molded plastic over glass passivated junction Terminals: Plated Axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denoted positive end (cathode) except Bipolar Mounting Position: Any Weight: 0.07 ounce, 2.1 gram Dimensions in inches (milimeters) DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA Suffix for types 30KPA28 thru types 30KPA400 Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. RATING Peak Pulse Power Dissipation on 10/1000 µs waveform (NOTE 1) Peak Pulse Current of on 10-1000 µs waveform (NOTE 1) Steady State Power Dissipation at Tl=75 °C Lead Lengths.375", (9.5mm)(NOTE 2) SYMBOL PPPM IPPM PM(AV) VALUE Minimum 30000 SEE TABLE 1 8.0 UNITS Watts Amps Watts Peak Forward Surge Current, 8.3ms Sine-Wave IFSM 400.0 Superimposed on Rated Load, (JEDEC Method) (NOTE 3) Operatings and Storage Temperature Range TJ, TSTG -55 to +175 NOTES: 1.Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2. 2.Mounted on Copper Pad area of 0.8x0.8" (20x20mm) per Fig.5. 3.8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum Certified RoHS Compliant UL File # E223026 Amps °C MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel: 760-564-8656 • Fax: 760-564-2414 1-800-831-4881 Email: sales@mdesemicondutor.com Web: www.mdesemiconductor.com 30KPA Series Rating and Characteristic Curves Pppm 1 PEAK PULSE POWER 1 KW 10000 1000 Non-repetitive pulse waveform shown in Fig. 3TA = 25ºC 100 10 1 0.1 1 10 100 1,000 10,000 100,000 td PULSE WIDTH 1 µsec FIG. 1 PEAK PULSE POWER RATING Fig.2 - Pulse Derating Curve 100 87.5 Peak Pulse Power (PPP) or Current (IPP) Derating in 75 62.5 50 37.5 25 12.5 0 0 25 50 75 100 125 150 175 200 TA - Ambient Temperature (°C) 150 IPPM - Peak Pulse Current,% IRSM tr = 10µsec . Peak Value IPPM 100 Half Value- IPPM 2 TJ = 25°C Pulse Width(td)is defined as the point where the peak current decays to 50% of IPPM 50 10/1000µsec.Waveform as defined by R.E.A. td 0 0 1.0 2.0 3.0 t - Time(ms) 3.0 4.0 4.0 Fig.3 - Pulse Waveform MDE Semiconductor, Inc. 1-800-831-4881 Email: sales@mdesemicondutor.com Web: www.mdesemiconductor.com 30000 Watt TVS UNI-POLAR BI-POLAR TEST REVERSE BREAKDOWN PEAK REVERSE MAXIMUM VOLTAGE CURRENT CLAMPING PULSE STANDOFF LEAKAGE VBR (V) (IT ) VOLTAGE VOLTAGE CURRENT @ VRWM IR VRWM (V) IPP (A) @IPP Vc (V) MIN. @ IT (µA) mA 606.0 548.9 517.2 490.3 450.9 420.8 415.1 391.5 371.3 350.7 331.5 327.9 297.1 291.3 283.2 278.0 271.7 265.8 253.8 234.0 217.7 207.0 194.2 183.0 172.9 155.9 142.3 135.8 129.8 123.7 120.0 111.2 110.2 104.3 94.7 86.9 78.3 72.8 72.8 69.5 65.3 64.5 62.0 53.0 46.0 5000 5000 5000 5000 2000 1000 1000 250 150 50 20 20 15 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 28.00 31.3 50 50.0 30KPA28A 30KPA28CA 30.00 33.5 50 55.2 30KPA30A 30KPA30CA 33.00 36.9 50 58.5 30KPA33A 30KPA33CA 36.00 40.2 50 61.8 30KPA36A 30KPA36CA 39.00 43.6 20 67.2 30KPA39A 30KPA39CA 42.00 46.9 10 72.0 30KPA42A 30KPA42CA 43.00 48.0 10 73.0 30KPA43A 30KPA43CA 45.00 50.3 5 77.4 30KPA45A 30KPA45CA 48.00 53.6 5 81.6 30KPA48A 30KPA48CA 51.00 57.0 5 86.4 30KPA51A 30KPA51CA 54.00 60.3 5 91.4 30KPA54A 30KPA54CA 58.00 64.8 5 92.4 30KPA58A 30KPA58CA 60.00 67.0 5 102.0 30KPA60A 30KPA60CA 64.00 71.5 5 104.0 30KPA64A 30KPA64CA 66.00 73.7 5 107.0 30KPA66A 30KPA66CA 70.00 78.2 5 109.0 30KPA70A 30KPA70CA 71.00 79.3 5 111.5 30KPA71A 30KPA71CA 72.00 80.4 5 114.0 30KPA72A 30KPA72CA 75.00 83.8 5 119.4 30KPA75A 30KPA75CA 78.00 87.1 5 129.0 30KPA78A 30KPA78CA 84.00 93.8 5 139.2 30KPA84A 30KPA84CA 90.00 100.5 5 146.4 30KPA90A 30KPA90CA 96.00 107.2 5 156.0 30KPA96A 30KPA96CA 102.00 113.9 5 165.6 30KPA102A 30KPA102CA 108.00 120.6 5 175.2 30KPA108A 30KPA108CA 120.00 134.0 5 194.4 30KPA120A 30KPA120CA 132.00 147.4 5 213.0 30KPA132A 30KPA132CA 144.00 160.8 5 223.2 30KPA144A 30KPA144CA 150.00 167.6 5 233.4 30KPA150A 30KPA150CA 156.00 174.3 5 245.0 30KPA156A 30KPA156CA 160.00 178.7 5 252.6 30KPA160A 30KPA160CA 168.00 187.7 5 272.4 30KPA168A 30KPA168CA 170.00 189.9 5 275.0 30KPA170A 30KPA170CA 180.00 201.1 5 290.4 30KPA180A 30KPA180CA 198.00 221.2 5 319.8 30KPA198A 30KPA198CA 216.00 241.3 5 348.6 30KPA216A 30KPA216CA 240.00 268.1 5 387.0 30KPA240A 30KPA240CA 258.00 288.2 5 416.4 30KPA258A 30KPA258CA 260.00 290.4 5 416.0 30KPA260A 30KPA260CA 270.00 301.6 5 436.2 30KPA270A 30KPA270CA 280.00 312.8 5 464.0 30KPA280A 30KPA280CA 288.00 321.7 5 469.9 30KPA288A 30KPA288CA 300.00 333.0 5 483.0 30KPA300A 30KPA300CA 350.00 389.0 5 564.0 30KPA350A 30KPA350CA 400.00 444.0 5 644.0 30KPA400A 30KPA400CA For bidirectional type having Vrwm of 40 volts and less, the IR limit is double For parts without A , the V is + 10% BR Certified RoHS Compliant UL File # E223026