CLG-150-36C

150W Single Output Switching Power Supply Features : CLG-150 series Universal AC input / Full range (up to 280VAC) Protections: Short circuit / Overload / Over voltage / Over temperature Built-in active PFC function Cooling by free air convection OCP point adjustable through output cable or internal potential meter Suitable for LED lighting and moving sign applications IP65 design for indoor or outdoor installations 3 years warranty F 110 SELV EQUIVALENT IP65 ( for A,B type only ) CLG-150-12 A A : IP65 rated. Output voltage and constant current level can be adjusted through internal potential meter. B : IP65 rated. Constant current level adjustable through output cable. (Optional) C : Terminal block for I/O connection. Output voltage and constant current level can be adjusted through internal potential meter. (Optional) SPECIFICATION MODEL DC VOLTAGE RATED CURRENT RATED POWER CLG-150-12 12V 11A 132W CONSTANT CURRENT REGION Note.4 6 ~12V CLG-150-15 15V 7.5 ~ 15V 9.5A 142.5W 150mVp-p 13 ~ 17V 4.75 ~ 9.5A 2.0% 0.5% 1.0% CLG-150-20 20V 10 ~ 20V 7.5A 150W 150mVp-p 17 ~ 22V 3.75 ~ 7.5A 2.0% 0.5% 1.0% 230VAC /115VAC CLG-150-24 24V 12 ~ 24V 6.3A 151.2W 150mVp-p 22 ~ 27V 3.15 ~ 6.3A 1.0% 0.5% 0.5% CLG-150-30 30V 15 ~ 30V 5A 150W 150mVp-p 26 ~ 32V 2.5 ~ 5A 1.0% 0.5% 0.5% CLG-150-36 36V 18 ~ 36V 4.2A 151.2W 150mVp-p 31 ~ 41V 2.1 ~ 4.2A 1.0% 0.5% 0.5% CLG-150-48 48V 24 ~ 48V 3.2A 153.6W 200mVp-p 40 ~ 56V 1.6 ~ 3.2A 1.0% 0.5% 0.5% RIPPLE & NOISE (max.) Note.2 150mVp-p VOLTAGE ADJ. RANGE Note.6 9 ~ 13V OUTPUT CURRENT ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT(max.) LEAKAGE CURRENT OVER CURRENT SHORT CIRCUIT PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. Note.4 Can be adjusted by internal potential meter or through output cable 5.5 ~ 11A 2.0% 0.5% 1.0% 50ms / 230VAC 3000ms, 80ms at full load Note.5 90 ~ 280VAC 16ms / 115VAC at full load 127 ~ 396VDC PF 0.98/115VAC at full load and rated output voltage 88% 90% 90% 90% 89% 90% 47 ~ 63Hz PF 0.95/230VAC 88% 2A / 115VAC 1A / 230VAC COLD START 65A/230VAC 50% load) ; EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61547, EN55024, light industry level (surge 4KV), criteria A 303.7Khrs min. MIL-HDBK-217F (25 ) 222*68*39mm (L*W*H) 1.0Kg; 12pcs/13Kg/0.49CUFT(CLG-150-A/B) 1Kg; 12pcs/13Kg/0.96CUFT(CLG-150-C) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Constant current operation region is within 50% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. 5. Derating may be needed under low input voltages. Please check the derating curve for more details. 6. Type A and type C only. 7. Please refer to derating curve. 8. Please refer to OLP characteristics. File Name:CLG-150-SPEC 2008-12-23 150W Single Output Switching Power Supply Mechanical Specification A Type:(CLG-150-_A) CLG-150 Case No. 954A series Unit:mm 222.2 12 9.6 198.2 9.4 AC/L(Brown) AC/N(Blue) FG (Greed/Yellow) 300 20 Io ADJ. 300 20 +V(Red) -V(Black) 34.2 18AWG 3C 68 14AWG 2C 9.4 Vo ADJ. 4.2 4PL IP65 rated. Output voltage and constant current level can be adjusted through internal potential meter. (Can access by removing the rubber stopper on the case.) B Type:(CLG-150-_B) 222.2 12 9.6 198.2 300 20 14AWG 2C +V(Red) -V(Black) ADJ1(Blue) ADJ2(White) AC/L(Brown) AC/N(Blue) FG (Greed/Yellow) 300 20 34.2 9.4 68 18AWG 2C 18AWG 3C 9.4 4.2 4PL IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistor between ADJ1 and ADJ2. Reference resistance value for output current adjustment (Typical) Resistance Open 4.7K 620 82 Short Percentage of rated current Slightly > 100% 100% 75% 50% Slightly < 50% File Name:CLG-150-SPEC 2008-12-23 38.75 38.75 150W Single Output Switching Power Supply C Type:(CLG-150-_C) 231.2 15.5 8.5 Io ADJ. 198.2 CLG-150 series 7.5 9.5 I/P 1 2 3 AC Input Terminal Pin No. Assignment 1 2 39 7 68 O/P 7 Vo ADJ. 4.2 4PL Pin No. 1 2 3 Assignment FG AC/N AC/L DC Output Terminal Pin No. Assignment Pin No. 1 2 Assignment +V -V 38.75 Output voltage and constant current level can be adjusted through internal potential meter. (Can access by removing the rubber stopper on the case.) Block Diagram F osc : 100KHz EMI FILTER & RECTIFIERS PFC CIRCUIT POWER SWITCHING RECTIFIERS & FILTER O.L.P. FG PFC CONTROL DETECTION CIRCUIT O.V.P. +V -V ADJ1 ADJ2 (B Type) I/P O.L.P. PWM & PFC CONTROL Derating Curve 100 Static Characteristics fosc : 100KHz 230VAC 100 90 80 230VAC Input only 100VAC 80 70 60 LOAD (%) 40 LOAD (%) -25 -10 0 15 30 50 55 60 70 (HORIZONTAL) 60 50 40 20 -30 90 100 125 135 145 155 165 175 180 200 230 280 AMBIENT TEMPERATURE ( ) -30 start up possible for 230VAC input INPUT VOLTAGE (V) 60Hz File Name:CLG-150-SPEC 2008-12-23