CLG-60-48

60W Single Output Switching Power Supply Features : CLG-60 series Universal AC input / Full range Protections: Short circuit / Overload / Over voltage / Over temperature Built-in active PFC function IP67 design for indoor or outdoor installations UL1310 Class 2 power unit Cooling by free air convection 100% full load burn-in test High reliability Suitable for LED lighting and moving sign applications 3 years warranty F 110 M M SELV EQUIVALENT SPECIFICATION MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT CLG-60-12 12V 5A 0 ~ 5A 60W 11 ~ 13V CONSTANT CURRENT REGION Note.6 8.4 ~ 12V 15V LPS CLG-60-20 20V 14 ~ 20V 3A 0 ~ 3A 60W 1.8Vp-p 18 ~ 22V ( for 48V only) ( except for 48V ) IP67 CLG-60-36 36V 25.2 ~ 36V 1.7A 0 ~ 1.7A 61W 3.6Vp-p 32.5 ~ 39V CLG-60-48 48V 33.6 ~ 48V 1.3A 0 ~ 1.3A 62.5W 4.6Vp-p 43.6 ~ 51.8V CLG-60-15 10.5 ~ 15V 4A 0 ~ 4A 60W 2.4Vp-p 13.8 ~ 16.2V CLG-60-24 24V 16.8 ~ 24V 2.5A 0 ~ 2.5A 60W 2.7Vp-p 22 ~ 26V CLG-60-27 27V 18.9 ~ 27V 2.3A 0 ~ 2.3A 62.1W 2.7Vp-p 25 ~ 30V RIPPLE & NOISE (max.) Note.2 2Vp-p VOLTAGE ADJ. RANGE CURRENT ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR INPUT EFFICIENCY(Typ.) AC CURRENT INRUSH CURRENT(max.) LEAKAGE CURRENT OVER CURRENT SHORT CIRCUIT PROTECTION OVER VOLTAGE Fixed can be modified between the range above Fixed can be modified between 3% ~ 25% rated output current 10% 4.0% 10% 1500ms, 100ms / 230VAC 3000ms, 100ms / 115VAC at full load Note.5 90 ~ 264VAC 127 ~ 370VDC PF>0.98/115VAC at full load 84.5% 0.4A/230VAC 86.5% 86.5% 87% 87% 88% 47 ~ 63Hz PF>0.9/230VAC 83% 0.8A/115VAC 40A/230VAC 0.5mA / 240VAC 95 ~ 110% 130% (max) Protection type : Constant current limiting, recovers automatically after fault condition is removed Note.4 Hiccup mode, recovers automatically after fault condition is removed. 13.8 ~ 16V 17.5 ~ 21V 22.8 ~ 25V 28 ~ 32V Protection type : Shut down o/p voltage, re-power on to recover 12V: 90 10 (TSW1) detect on heatsink of power transistor 10 (TSW1) detect on heatsink of power transistor 15V ~ 48V: 85 -30 ~ +70 -40 ~ +80 0.03%/ 31 ~ 35V 41 ~ 46V 54 ~ 60V OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS Protection type : Shut down o/p voltage, recovers automatically after temperature goes down (Refer to output load derating curve) , 10 ~ 95% RH (0 ~ 50 ) 20 ~ 90% RH non-condensing 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL1310 Class 2, TUV EN61347-1, EN61347-2-13, CAN/CSA C22.2 No. 223-M91(except for 48V), IP67 approved WITHSTAND VOLTAGE I/P-O/P:4.25KVDC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH EMC EMI CONDUCTION & RADIATION Compliance to EN55015, EN55022 (CISPR22) Class B Compliance to EN61000-3-2 Class C (>50% load) ; EN61000-3-3 HARMONIC CURRENT EMS IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN61547, light industry level, criteria A 495.7Khrs min. MIL-HDBK-217F (25 172*61.5*39mm (L*W*H) 0.86Kg; 16pcs/14.8Kg/0.54CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Please refer to OLP characteristics. 5. Derating may be needed under low input voltage. Please check the derating curve for more details. 6. Constant current operation region is within 70% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. File Name:CLG-60-SPEC 2008-08-18 60W Single Output Switching Power Supply Mechanical Specification CLG-60 Case No. 957A series Unit:mm 195.8 12 9.6 300 20 7.08 172 7.28 300 20 32 61.36 AC/L(Brown) AC/N(Blue) FG (Green/Yellow) 18AWG 3C 18AWG 2C 4.2 4PL +V(Red) -V(Black) 7.28 7.08 32 Block Diagram RECTIFIERS & FILTER DETECTION CIRCUIT PWM & PFC CONTROL O.V.P. fosc : 90KHz(115VAC) 120KHz(230VAC) POWER SWITCHING +V -V I/P EMI FILTER & RECTIFIERS FG O.L.P. O.C.P. Derating Curve Static Characteristics Ta:25 100 100 90 80 80 70 60 LOAD (%) 40 LOAD (%) 60 50 40 20 -30 -25 -5 0 15 30 50 60 70 (HORIZONTAL) 90 100 125 135 145 155 165 175 180 200 230 264 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) 60Hz File Name:CLG-60-SPEC 2008-08-18 38.75