ES18B05-050

9~18W AC-DC Single Output Desktop Features : Universal AC input / Full range 2 pole AC inlet IEC320-C8 Class power (without earth pin) Full output 3~48V safety approval ES18B series Protections: Short circuit / Overload / Over voltage Fully enclosed plastic case RCC control circuit and regulated LED indicator for power on Approvals: UL / CUL / TUV / BSMI / CCC / CB / FCC / CE 1 year warranty SPECIFICATION ORDER NO. SAFETY MODEL NO. DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER (max.) OUTPUT TUV Rheinland Product Safety geprUfre Sicherheit ES18B03-P1J ES18B05-P1J ES18B07-P1J ES18B09-P1J ES18B12-P1J ES18B15-P1J ES18B18-P1J ES18B24-P1J ES18B28-P1J ES18B48-P1J ES18B03-033 ES18B05-050 ES18B07-075 ES18B09-090 ES18B12-120 ES18B15-150 ES18B18-180 ES18B24-240 ES18B30-280 ES18B48-480 Note.2 3.3V 5V 3.0A 15W 50mVp-p 5.0% 1.0% 5.0% 7.5V 2.0A 0.3 ~ 2.0A 15W 80mVp-p 5.0% 1.0% 5.0% 9V 2.0A 0.2 ~2.0A 18W 80mVp-p 5.0% 1.0% 5.0% 12V 1.50A 18W 80mVp-p 3.0% 1.0% 3.0% 15V 1.20A 18W 100mVp-p 3.0% 1.0% 3.0% 18V 1.0A 18W 150mVp-p 3.0% 1.0% 3.0% 24V 0.75A 18W 180mVp-p 2.0% 1.0% 2.0% 28V 0.64A 18W 240mVp-p 2.0% 1.0% 2.0% 48V 0.375A 18W 240mVp-p 2.0% 1.0% 2.0% 2.72A 9W 0.3 ~ 2.72A 0.3 ~ 3.0A 0.15 ~ 1.50A 0.1 ~ 1.20A 0.1 ~ 1.0A 0.1 ~ 0.75A 0.06 ~ 0.64A 0.05 ~ 0.375A RIPPLE & NOISE (max.) Note.3 50mVp-p VOLTAGE ADJ. RANGE Fixed VOLTAGE TOLERANCE Note.4 5.0% LINE REGULATION LOAD REGULATION Note.5 Note.6 1.0% 5.0% SETUP, RISE, HOLD UP TIME 300ms, 100ms, 16ms at full load VOLTAGE RANGE 90 ~ 264VAC 135 ~ 370VDC FREQUENCY RANGE INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT(max.) OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 47 ~ 63Hz 55% 70% 72% 72% 74% 77% 78% 80% 81% 82% 0.5A / 100VAC 40A / 230VAC 0.25mA / 240VAC 130 ~ 350% rated output power 110 ~ 200% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 105 ~ 135% rated output voltage Protection type : Clamp by zener diode, output short 0 ~ +50 (Refer to output load derating curve) 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, CSA C22.2, TUV EN60950-1, BSMI CNS14336, CCC GB4943 Approved I/P-O/P:3KVAC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION Compliance to EN55022 class B, FCC PART 15 / CISPR22 class B, CNS13438 class B, GB9254 class B (Note. 7) HARMONIC CURRENT Compliance to EN61000-3-2,3, GB17625.1 EMS IMMUNITY MTBF DIMENSION PACKING PLUG CABLE Compliance to EN61000-4-2,3,4,5,6,8,11, Light industry level, criteria A 500Khrs min. MIL-HDBK-217F(25 ) 79*54*33mm (L*W*H) 220g ; 60pcs / 13.5kg / CARTON Standard type P1J: 2.1 * 5.5 * 11mm, tuning fork type, center positive for stock ; Other type available by customer requested Standard type UL1185 6ft (with ferrite core) for stock ; Other type available by customer requested OTHERS CONNECTOR NOTE 1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 20% to 100% rated load 7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:ES18B-SPEC 2007-03-01 9~18W AC-DC Single Output Desktop Mechanical Specification ES18B series Unit:mm UL1185 16AWG 1830 50mm for 3.3V UL1185 18AWG 1830 50mm for 5~48V POWER LED 70 10mm C"+" 11 0.5mm ID 2.1 x OD 5.5 N AME PLATE 79 33 Plug Assignment Standard plug: P1J (option) P1J 54 P/N CENTER OUTPUT + Derating Curve Static Characteristics 100 100 LOAD (%) LOAD (%) 50 80 60 70 0 10 20 30 40 0 50 60 70 80 90 100 260 Ta ( ) INPUT VOLTAGE File Name:ES18B-SPEC 2007-03-01