ES18U

9~18W AC-DC Single Output Wall-mounted type Features : Universal AC input / Full range 2 pole USA plug Class power (without earth pin) Full output 3~48V safety approval ES18U series Protections: Short circuit / Overload / Over voltage Fully enclosed plastic case RCC control circuit and regulated LED indicator for power on Approvals: UL/ CUL / BSMI / CB / FCC / CE 1 year warranty SPECIFICATION ORDER NO. SAFETY MODEL NO. DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER (max.) OUTPUT ES18U03-P1J ES18U05-P1J ES18U07-P1J ES18U09-P1J ES18U12-P1J ES18U15-P1J ES18U18-P1J ES18U24-P1J ES18U28-P1J ES18U48-P1J ES18U03 Note.2 3.3V ES18U05 5V 3.0A 15W 50mVp-p 5.0% 1.0% 5.0% ES18U07 7.5V 2.0A 0.3 ~ 2.0A 15W 80mVp-p 5.0% 1.0% 5.0% ES18U09 9V 2.0A 0.2 ~2.0A 18W 80mVp-p 5.0% 1.0% 5.0% ES18U12 12V 1.50A 18W 80mVp-p 3.0% 1.0% 3.0% ES18U15 15V 1.20A 18W 100mVp-p 3.0% 1.0% 3.0% ES18U18 18V 1.0A 18W 150mVp-p 3.0% 1.0% 3.0% ES18U24 24V 0.75A 18W 180mVp-p 2.0% 1.0% 2.0% ES18U28 28V 0.64A 18W 240mVp-p 2.0% 1.0% 2.0% ES18U48 48V 0.375A 18W 240mVp-p 2.0% 1.0% 2.0% 2.72A 9W 0.3 ~ 2.72A 0.3 ~ 3.0A 0.15 ~ 1.50A 0.1 ~ 1.20A 0.1 ~ 1.0A 0.1 ~ 0.75A 0.06 ~ 0.64A 0.05 ~ 0.375A RIPPLE & NOISE (max.) Note.3 50mVp-p VOLTAGE ADJ. RANGE Fixed VOLTAGE TOLERANCE Note.4 5.0% LINE REGULATION LOAD REGULATION Note.5 Note.6 1.0% 5.0% SETUP, RISE, HOLD TIME VOLTAGE RANGE FREQUENCY RANGE INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT(max.) OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 300ms, 100ms, 16ms at full load 90 ~ 264VAC 135 ~ 370VDC 47 ~ 63Hz 55% 20A / 115VAC 0.25mA / 240VAC 130 ~ 350% rated output power 110 ~ 200% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 105 ~ 135% rated output voltage Protection type : Clamp by zener diode, output short 0 ~ +50 (Refer to output load derating curve) 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, CSA C22.2, BSMI,CNS14336 Approved I/P-O/P:3KVAC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH 70% 72% 72% 74% 77% 78% 80% 81% 82% 0.5A / 100VAC SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION Compliance to EN55022 class B, CNS13438 class B, FCC PART 15 / CISPR22 class B (Note. 7) HARMONIC CURRENT Compliance to EN61000-3-2,3 EMS IMMUNITY MTBF DIMENSION PACKING PLUG CABLE Compliance to EN61000-4-2,3,4,5,6,8,11, Light industry level, criteria A 500Khrs min. MIL-HDBK-217F(25 ) 79*54*33mm (L*W*H) 220g ; 60pcs / 13.5kg / CARTON Standard type P1J: 2.1 * 5.5 * 11mm, tuning fork type, center positive for stock ; Other type available by customer requested Standard type UL1185 6ft (with ferrite core) for stock ; Other type available by customer requested OTHERS CONNECTOR NOTE 1.All parameters are specified at 115VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 20% to 100% rated load 7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:ES18U-SPEC 2007-03-01 9~18W AC-DC Single Output Wall-mounted type Mechanical Specification ES18U series Unit:mm 17 UL1185 16AWG 1830 50mm for 3.3V UL1185 18AWG 1830 50mm for 5~48V POWER LED 70 10mm C"+" 11 0.5mm ID 2.1 x OD 5.5 N AME PLATE 79 33 Plug Assignment Standard plug: P1J (option) P1J 54 P/N CENTER OUTPUT + Derating Curve Static Characteristics 100 100 LOAD (%) LOAD (%) 50 80 60 70 0 10 20 30 40 0 50 60 70 80 90 100 260 Ta ( ) INPUT VOLTAGE File Name:ES18U-SPEC 2007-03-01