ES25U12-P1J

20~25W AC-DC Single Output Wall-mounted type Features : Universal AC input / Full range 2 pole USA plug Class power (without earth pin) Full output 5~48V safety approval ES25U series Protections: Short circuit / Overload / Over voltage Fully enclosed plastic case PWM 3842 control circuit and regulated LED indicator for power on Approvals: UL / CUL / BSMI / CB / FCC / CE 1 year warranty SPECIFICATION ORDER NO. SAFETY MODEL NO. DC VOLTAGE RATED CURRENT CURRENT RANGE OUTPUT RATED POWER (max.) VOLTAGE TOLERANCE Note.4 LINE REGULATION LOAD REGULATION Note.5 Note.6 ES25U05-P1J ES25U07-P1J ES25U09-P1J ES25U12-P1J ES25U15-P1J ES25U18-P1J ES25U24-P1J ES25U28-P1J ES25U36-P1J ES25U48-P1J ES25U05-050 ES25U07-075 ES25U09-090 ES25U12-120 ES25U15-150 ES25U18-180 ES25U24-240 ES25U30-280 ES25U36-360 ES25U48-480 Note.2 5V 7.5V 2.93A 22W 80mVp-p 5.0% 1.0% 5.0% 9V 2.77A 25W 80mVp-p 5.0% 1.0% 5.0% 12V 2.08A 25W 80mVp-p 3.0% 1.0% 3.0% 15V 1.66A 25W 100mVp-p 3.0% 1.0% 3.0% 18V 1.39A 25W 150mVp-p 3.0% 1.0% 3.0% 24V 1.04A 25W 180mVp-p 2.0% 1.0% 2.0% 28V 0.89A 25W 240mVp-p 2.0% 1.0% 2.0% 36V 0.69A 25W 240mVp-p 2.0% 1.0% 2.0% 48V 0.52A 25W 240mVp-p 2.0% 1.0% 2.0% 4.0A 0.4 ~ 4.0A 20W 5.0% 1.0% 5.0% 0.3 ~ 2.93A 0.2 ~ 2.77A 0.1 ~ 2.08A 0.1 ~ 1.66A 0.1 ~ 1.39A 0.1 ~ 1.04A 0.1 ~ 0.89A 0.06 ~ 0.69A 0.05 ~ 0.52A RIPPLE & NOISE (max.) Note.3 50mVp-p SETUP, RISE, HOLD UP TIME 600ms, 50ms, 16ms at full load 90 ~ 264VAC 135 ~ 370VDC VOLTAGE RANGE FREQUENCY RANGE INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT(max.) OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 47 ~ 63Hz 70% 72% 76% 76% 78% 80% 82% 82% 82% 82% 0.7A / 100VAC 30A / 230VAC 0.25mA / 240VAC 130 ~ 180% rated output power 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 105 ~ 135% rated output voltage Protection type : Shut down o/p voltage, re-power on to recover 0 ~ +50 (Refer to output load derating curve) 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, CSA C22.2, BSMI, CNS14336 Approved I/P-O/P:3KVAC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION Compliance to EN55022 class B, CNS13438 class B, FCC PART 15 / CISPR22 class B (Note. 7) HARMONIC CURRENT Compliance to EN61000-3-2,3 EMS IMMUNITY MTBF DIMENSION PACKING PLUG CABLE Compliance to EN61000-4-2,3,4,5,6,8,11, Light industry level, criteria A 500Khrs min. MIL-HDBK-217F(25 ) 79*54*33mm (L*W*H) 220g ; 60pcs / 13.5kg / CARTON Standard type P1J: 2.1 * 5.5 * 11mm, tuning fork type, center positive for stock ; Other type available by customer requested Standard type UL1185 6ft (with ferrite core) for stock ; Other type available by customer requested OTHERS CONNECTOR NOTE 1.All parameters are specified at 115VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 20% to 100% rated load 7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:ES25U-SPEC 2007-03-01 20~25W AC-DC Single Output Wall-mounted type Mechanical Specification ES25U series Unit:mm 17 UL1185 16AWG 1830 50mm for 5V UL1185 18AWG 1 830 50mm for 7.5 ~ 48V POWER LED 70 10mm C"+" 11 0.5mm ID 2.1 x OD 5.5 NAME PLATE 79 33 Plug Assignment Standard plug: P1J (option) P1J 54 P/N CENTER OUTPUT + Derating Curve Static Characteristics 100 100 LOAD (%) LOAD (%) 80 60 70 0 10 20 30 38 50 0 50 60 70 80 90 100 260 Ta ( ) INPUT VOLTAGE File Name:ES25U-SPEC 2007-03-01