FRA024-S48-I

FRA024-S48-I

  • 厂商:

    MEANWELL(明纬)

  • 封装:

  • 描述:

    FRA024-S48-I - 15~24WAC-DC Single Output Interchangeable Wall-mounted type - Mean Well Enterprises C...

  • 详情介绍
  • 数据手册
  • 价格&库存
FRA024-S48-I 数据手册
15 ~ 24W AC-DC Single Output Interchangeable Wall-mounted type Features : GE24 series Interchangeable AC plugs (plug kit sold seperately) Universal AC input / Full range No load power consumption< 0.3W ErP step2 compliant Meet EISA 2007 (Energy Independence and Security Act) for 5~48V Class power (without earth pin) Protections: Short circuit / Overload / Over voltage Fully enclosed plastic case LED indicator for power on Pass LPS Approvals: UL / CUL / TUV / CCC / CB / FCC / CE / C-Tick 2 years warranty AC INLET PLUG TYPE Australian type ORDER NO. AC plug-AU U.K type AC plug-UK European type AC plug-EU US type AC plug-US Mix four type AC plug-MIX SPECIFICATION II POWER SUPPLY MAIN BODY ORDER NO. GE24 I 05-P1J GE24 I 07-P1J GE24 I 09-P1J GE24 I 12-P1J GE24 I 15-P1J GE24 I 18-P1J GE24 I 24-P1J GE24 I 48-P1J SAFETY MODEL NO. DC VOLTAGE RATED CURRENT CURRENT RANGE OUTPUT RATED POWER (max.) VOLTAGE TOLERANCE Note.4 LINE REGULATION LOAD REGULATION Note.5 Note.6 II II II II II II II FRA024-S05- I FRA024-S07- I FRA024-S09- I FRA024-S12- I FRA024-S15- I FRA024-S18- I FRA024-S24- I FRA024-S48- I Note.2 5V II II II 7.5V 2.0A 0 ~ 2.0A 15W 75mVp-p 5.0% 1.0% 5.0% 9V 2.22A 0 ~ 2.22A 20W 100mVp-p 5.0% 1.0% 5.0% 12V 2.0A 0 ~ 2.0A 24W 120mVp-p 3.0% 1.0% 3.0% II 15V 1.6A 0 ~ 1.6A 24W 150mVp-p 3.0% 1.0% 3.0% II 18V 1.33A 0 ~ 1.33A 24W 180mVp-p 3.0% 1.0% 3.0% II 24V 1.0A 0 ~ 1.0A 24W 240mVp-p 3.0% 1.0% 3.0% II 48V 0.5A 0 ~ 0.5A 24W 300mVp-p 3.0% 1.0% 3.0% 3.0A 0 ~ 3.0A 15W 5.0% 1.0% 5.0% RIPPLE & NOISE (max.) Note.3 50mVp-p SETUP, RISE, HOLD UP TIME 4000ms, 100ms, 30ms / 230VAC VOLTAGE RANGE 90 ~ 264VAC 135 ~ 370VDC FREQUENCY RANGE INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT (max.) OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY 47 ~ 63Hz 76.5% 0.7A / 100VAC 79.5% 0.4A / 230VAC 4000ms, 100ms, 10ms / 115VAC at full load 81.5% 80A / 230VAC 82.5% 84% 84% 85% 85% COLD START 40A / 100VAC 0.25mA / 240VAC 110% ~ 200% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 115% ~ 135% Protection type : Clamp by zener diode -10 ~ +50 (Refer to "Derating Curve") 20% ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMC EMISSION EMC IMMUNITY LIFE OTHERS MTBF DIMENSION PACKING UL60950-1, CSA C22.2, TUV EN60950 -1, CCC GB4943 approved I/P-O/P:4242VDC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022, EN61000-3-2,3, FCC part15, GB9254 class B Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A 2 years : 100% load 30 , 8 hours / day 100Khrs min. MIL-HDBK-217F (25 ) 81*43*40.5mm (L*W*H) 134g ; 60pcs / 12.32kg / CARTON Standard type P1J: 2.1 See page2 * 5.5 * 11mm turning fork type, center positive for stock ; Other type available by customer requested DC OUTPUT PLUG CONNECTOR CABLE NOTE 1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 10% to 100% rated load 7.Main body unit and AC inlet plug should be ordered seperately ; it needs to be used along with any of the AC inlet plug. File Name:GE24-SPEC 2011-06-14 II 15 ~ 24W AC-DC Single Output Interchangeable Wall-mounted type Mechanical Specification GE24 series Unit:mm AWM2468 18AWG*2C 1500 50mm ID 2.1 x OD 5.5 C"+" 43 11 0.5mm 81 Plug Assignment Standard plug: P1J P1J P/N CENTER OUTPUT + 40.5 Derating Curve 36.5 Static Characteristics 100 100 90 80 LOAD (%) 75 70 LOAD (%) 10 20 30 40 50 50 60 50 40 -10 90 95 100 115 120 140 160 180 200 220 240 264 Ta ( ) File Name:GE24-SPEC 2011-06-14
FRA024-S48-I
1. 物料型号 - GE24系列,15~24W AC-DC单路输出可互换式壁挂型。

2. 器件简介 - GE24系列电源适配器支持可互换的AC插头(插头组件需单独购买),具有全球通用的AC输入/全范围输入,无负载功耗0.3W,符合ErP第二步能效要求,满足EISA 2007(能源独立和安全法案)5-48V Class I电源(无接地针)的要求,具有短路、过载、过压保护,全封闭塑料外壳,LED指示灯显示电源开启,通过LPS认证。

3. 引脚分配 - 标准插头P1J,中心为正极。

4. 参数特性 - 包括输出电压、额定电流、电流范围、额定功率、纹波和噪声、电压容差、线路调整率、输入电压范围、频率范围、效率、AC电流、冲击电流、漏电流、过载保护、过压保护等。 - 例如,5V输出型号的额定电流为3.0A,电流范围为0~3.0A,额定功率为15W。

5. 功能详解 - 电源适配器具有多种保护功能,包括过载保护(hiccup模式,故障排除后自动恢复)、过压保护(由齐纳二极管钳位)。

6. 应用信息 - 适用于需要15~24W功率的设备。

7. 封装信息 - 尺寸为814340.5mm(长宽高),包装重量为134g,60pcs/箱,每箱重量为12.32kg。
FRA024-S48-I 价格&库存

很抱歉,暂时无法提供与“FRA024-S48-I”相匹配的价格&库存,您可以联系我们找货

免费人工找货