GC120A48-R7B

120W Single Output Battery Charger Features : GC120 2 stage charging characteristic Universal AC input / Full range Built-in active PFC function, PF>0.97 series No load power consumption0.97 / 230VAC 86.5% 1.4A / 115VAC 70A / 230VAC 0.75mA / 240VAC 0.7A / 230VAC PF>0.99 / 115VAC at full load 90% 91% INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT(max.) OVERLOAD SHORT CIRCUIT 90 ~ 110% rated output power Note.4 Protection type : Constant current limiting recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed 14 ~ 16.5V 29 ~ 33V 59 ~ 69V Protection type : Shut down o/p voltage, re-power on to recover 100 10 (RTH2) detect on inside ambient temperature Protection type : Shut down o/p voltage, re-power on to recover -30 ~ +70 (Refer to "Derating Curve") 20% ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03% / (0~50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL1012 (for GC120Axx-AD1 only), TUV EN60950-1 approved I/P-O/P: 3KVAC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note. 5) EMC EMISSION EMC IMMUNITY OTHERS MTBF DIMENSION PACKING PLUG CABLE Compliance to EN55022 class B, FCC PART 15 class B / CISPR22 class B, EN61000-3-2,3 Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A 400.7Khrs min. MIL-HDBK-217F(25 ) 167*67*35mm (L*W*H) 0.62Kg; 20pcs/13.4Kg/0.9CUFT See page 2 ; Other type available by customer requested See page 2 ; Other type available by customer requested CONNECTOR NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. This is MeanWell's suggested range, please consult your battery manufacturer for their suggestions about maximum charging current limitation. 3. Derating may be needed under low input voltage. Please check the derating curve for more details. 4. Constant current operation region is within 50~100% rated output voltage. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:GC120-SPEC 2011-08-09 120W Single Output Battery Charger Mechanical Specification GC120 Case No.947A series Unit:mm 35 167 30 3mm UL2464 18AWGx4C 1200 50mm 67 (R7B) POWER LED 35 167 30 3mm SJTW 18AWGx2C 1200 50mm 67 (AD1) POWER LED Plug Assignment DC output connector (standard) R7B (KYCON KPP-4S or equivalent) PIN NO. OUTPUT 2 1 3 4 Charging Curve (V,I) Stage 1 Constant Current Area Stage 2 Constant Voltage Area V 1,4 2,3 +V -V 100% Fast Charging 10% Float Charging I TIME AC FG -V connected to AC FG DC output connector (optional) AD1 [ housing: Anderson 1327FP(red), 1327G6FP(black) contacts: Anderson 261G2 (45A) or equivalent ] Red(+V) Black(-V) Color of LED Red Green Derating Curve 100 Static Characteristics 230VAC 100 85 80 80 60 100VAC 70 LOAD (%) LOAD (%) 10 20 30 40 45 50 60 70 50 40 60 50 40 20 -30 (HORIZONTAL) 85 95 100 110 120 140 160 180 200 220 240 264 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) 60Hz File Name:GC120-SPEC 2011-08-09