GS06E-1P1J

GS06E-1P1J

  • 厂商:

    MEANWELL(明纬)

  • 封装:

  • 描述:

    GS06E-1P1J - 5 ~ 6WAC-DC Single Output Wall-mounted type - Mean Well Enterprises Co., Ltd.

  • 详情介绍
  • 数据手册
  • 价格&库存
GS06E-1P1J 数据手册
5 ~ 6W AC-DC Single Output Wall-mounted type Features : Universal AC input / Full range GS06E series No load power consumption 105% rated output voltage power for 5V ; >110% rated output power for 7.5 ~ 48V Protection type : Hiccup mode, recovers automatically after fault condition is removed >120% rated output power Protection type : Clamp by zener diode 0 ~ +40 (Refer to "Derating Curve") 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes EN60950-1 approved I/P-O/P:4242VDC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022, EN61000-3-2,3, FCC Part15 class B Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A 500Khrs min. MIL-HDBK-217F(25 ) 32*66*42.5mm (L*W*H) 100g ; 90pcs / 10Kg / CARTON Standard type P1J: 2.1 * 5.5 * 11mm, turning fork type center positive for stock ; Other type available by customer requested Standard type 20Awg UL1185 6ft for stock ; Other type available by customer requested CONNECTOR NOTE 1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load 7.Efficiency is measured at 230VAC. 8.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. File Name:GS06E-SPEC 2011-06-14 5 ~ 6W AC-DC Single Output Wall-mounted type Mechanical Specification GS06E series Unit:mm 34.5 1 4 Plug Assignment NAME PLATE Standard plug: P1J 18.3 13.6 P1J P/N OUTPUT + 18 19.8 CENTER 19 0.5 UL1185 20AWG 1830 50mm 62.5 1 42.5 1 66 1 11 C"+" 32 1 ID 2.1 x OD 5.5 Derating Curve Static Characteristics 100 100 LOAD (%) LOAD (%) 80 60 70 0 10 20 30 40 50 0 50 60 70 80 90 100 260 Ta ( ) INPUT VOLTAGE File Name:GS06E-SPEC 2011-06-14
GS06E-1P1J
PDF文档中包含的物料型号为:MAX31855KASA+。

器件简介指出,MAX31855是一款冷结温度传感器到数字输出转换器,专为K型热电偶设计,具有高精度和快速响应的特点。

引脚分配方面,该器件有8个引脚,包括VCC、GND、SO、CS、CLK、DOUT、DGND和REF。

参数特性包括供电电压范围为2.0V至5.5V,工作温度范围为-40°C至+125°C,精度为±1°C,转换速率为4次/秒。

功能详解显示,MAX31855能够将热电偶的模拟信号转换为数字信号,并通过SPI接口输出。

应用信息表明,该器件适用于高精度温度测量,如工业过程控制、医疗设备和环境监测。

封装信息显示,MAX31855采用28引脚TQFN封装。
GS06E-1P1J 价格&库存

很抱歉,暂时无法提供与“GS06E-1P1J”相匹配的价格&库存,您可以联系我们找货

免费人工找货