4 ~ 6W AC-DC Single Output Wall-mounted type
Features :
Universal AC input / Full range
GS06E
series
No load power consumption 105% rated output voltage power for 3.3 ~ 5V ; >110% rated output power for 7.5 ~ 48V Protection type : Hiccup mode, recovers automatically after fault condition is removed >120% rated output power Protection type : Clamp by zener diode 0 ~ +40 (Refer to output load derating curve) 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes EN60950-1 approved I/P-O/P:4242VDC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH
SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION Compliance to EN55022 class B, FCC Part15 class B (Note. 8) HARMONIC CURRENT Compliance to EN61000-3-2,3 EMS IMMUNITY MTBF OTHERS DIMENSION PACKING PLUG CABLE
Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A 500Khrs min. MIL-HDBK-217F(25 ) 32*66*42.5mm (L*W*H) 100g ; 90pcs / 10Kg / CARTON Standard type P1J: 2.1 * 5.5 * 11mm, turning fork type center positive for stock ; Other type available by customer requested Standard type 20Awg UL1185 6ft for stock ; Other type available by customer requested
CONNECTOR NOTE
1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load 7.Efficiency is measured at 230VAC. 8.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
File Name:GS06E-SPEC 2008-05-06
4 ~ 6W AC-DC Single Output Wall-mounted type
Mechanical Specification
GS06E
series
Unit:mm
34.5 1 4
Plug Assignment
NAME PLATE
Standard plug: P1J (option)
18.3
13.6
P1J
P/N OUTPUT +
18
19.8
CENTER
19 0.5
UL1185 20AWG 1830 50mm
62.5 1 42.5 1
66 1 11
C"+"
32 1 ID 2.1 x OD 5.5
Derating Curve
Static Characteristics
100
100
LOAD (%)
LOAD (%)
80 60
70
0
10
20
30
40
50
0
50
60
70
80
90 100
260
Ta (
)
INPUT VOLTAGE
File Name:GS06E-SPEC 2008-05-06
很抱歉,暂时无法提供与“GS06E-5P1J”相匹配的价格&库存,您可以联系我们找货
免费人工找货