GS06U-11P1J

5 ~ 6W AC-DC Single Output Wall-mounted type Features : Universal AC input / Full range GS06U series No load power consumption 105% rated output voltage power for 5V ; >110% rated output power for 7.5 ~ 48V Protection type : Hiccup mode, recovers automatically after fault condition is removed >120% rated output voltage Protection type : Clamp by zener diode 0 ~ +40 (Refer to "Derating Curve") 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, CSA22.2 approved I/P-O/P:4242VDC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022, EN61000-3-2,3, FCC part 15 Class B Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A 500Khrs min. MIL-HDBK-217F(25 ) 32*66*42.5mm (L*W*H) 100g ; 110pcs / 12Kg / CARTON Standard type P1J: 2.1 * 5.5 * 11mm, turning fork type center positive for stock ; Other type available by customer requested Standard type 20Awg UL1185 6ft for stock ; Other type available by customer requested CONNECTOR NOTE 1.All parameters are specified at 115VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load 7.Efficiency is measured at 115VAC. 8.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. File Name:GS06U-SPEC 2011-06-14 5 ~ 6W AC-DC Single Output Wall-mounted type Mechanical Specification GS06U series Unit:mm 12.7 NAME PLATE Plug Assignment Standard plug: P1J 6.3 18.2 P1J P/N OUTPUT + 1.5 24.2 CENTER UL1185 20AWG 1830 50mm 17.1 0.5 48 1 42.5 1 ID 2.1 x OD 5.5 66 1 11 C"+" 32 1 Derating Curve Static Characteristics 100 100 LOAD (%) LOAD (%) 80 60 70 0 10 20 30 40 50 0 50 60 70 80 90 100 260 Ta ( ) INPUT VOLTAGE File Name:GS06U-SPEC 2011-06-14