GS12U12-P1I

10 ~ 12W AC-DC Single Output Wall-mounted type Features : Universal AC input / Full range GS12U series No load power consumption< 0.3W/240VAC Pass energy star level IV for full series Meet EISA 2007 (Energy Independence and Security Act) 2 pole USA plug Class power (without earth pin) Protections: Short circuit / Overload / Over Voltage / Over temperature Fully enclosed plastic case Approvals: UL / CUL / BSMI / CB / FCC Pass LPS for full series 2 years warranty SPECIFICATION ORDER NO. SAFETY MODEL NO. DC VOLTAGE RATED CURRENT CURRENT RANGE OUTPUT RATED POWER VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION Note.4 Note.5 GS12U05-P1I GS12U05 5V 2.0A 0 ~ 2.0A 10W 5.0% 1.0% 5.0% GS12U07-P1I GS12U07 7.5V 1.6A 0 ~ 1.6A 12W 90mVp-p 4.0% 1.0% 4.0% GS12U09-P1I GS12U09 9V 1.33A 0 ~ 1.33A 12W 90mVp-p 4.0% 1.0% 4.0% GS12U12-P1I GS12U12 12V 1.0A 0 ~ 1.0A 12W 120mVp-p 3.0% 1.0% 3.0% GS12U15-P1I GS12U15 15V 0.8A 0 ~ 0.8A 12W 150mVp-p 3.0% 1.0% 3.0% GS12U18-P1I GS12U18 18V 0.67A 0 ~ 0.67A 12.06W 180mVp-p 3.0% 1.0% 2.0% GS12U24-P1I GS12U24 24V 0.5A 0 ~ 0.5A 12W 200mVp-p 3.0% 1.0% 2.0% RIPPLE & NOISE (max.) Note.2 75mVp-p 500ms, 20ms, 10ms/115VAC at full load SETUP, RISE, HOLD UP TIME 500ms, 20ms, 30ms/230VAC 90 ~ 264VAC 135 ~ 370VDC VOLTAGE RANGE FREQUENCY RANGE INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT (max.) OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE Note.6 WORKING TEMP. WORKING HUMIDITY 47 ~ 63Hz 72% 0.31A / 115VAC 75% 0.16A / 230VAC 45A / 230VAC 76% 77% 79% 80% 80% COLD START 25A / 115VAC 0.25mA / 240VAC >105% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 115% ~ 135% Protection type : Clamp by zener diode U1 Tj 140 typically (U1) Detect on main control IC Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 0 ~ +50 (Refer to output load derating curve) 20% ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.03% / (0 ~ 40 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes VIBRATION UL60950-1, CSA22.2, BSMI CNS14336 approved SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION HARMONIC CURRENT EMS IMMUNITY MTBF OTHERS DIMENSION PACKING PLUG CABLE I/P-O/P:3KVAC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH Compliance to FCC part15 class B, EN55022, EN61204-3 class B, BSMI CNS13438 Compliance to EN61000-3-2,3 Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN61204-3, light industry level, criteria A 1414.6Khrs min. MIL-HDBK-217F (25 ) 65*47*26.5mm (L*W*H) 0.15Kg ; 100pcs / 16Kg / CARTON Standard type P1I: 2.1 * 5.5 * 9.5mm turning fork type, center positive for stock ; Other type available by customer requested Standard type UL1185 6ft (4FT only for 5V output) for stock ; Other type available by customer requested CONNECTOR NOTE 1.All parameters are specified at 115VAC input, rated load, 25 70% RH Ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Tolerance: includes set up tolerance, line regulation, load regulation. 4.Line regulation is measured from low line to high line at rated load. 5.Load regulation is measured from 10% to 100% rated load. 6.The over temperature protection (OTP) is the built-in function of the control IC (U1). The activating level described above is based on the specification provided by the IC manufacturer. File Name:GS12U-SPEC 2008-05-06 10 ~ 12W AC-DC Single Output Wall-mounted type Mechanical Specification GS12U series Unit:mm UL1185 18AWG 1230 50mm for 5V UL1185 18AWG 1830 50mm for others 30 10mm 17 1 26.5 1 6.3 0.3 65 1 ID 2.1 x OD 5.5 C"+" 47 1 9.5 0.5mm Plug Assignment Standard plug: P1I (option) P1I P/N 1.5 0.2 12.7 0.4 OUTPUT + CENTER Derating Curve Static Characteristics(24V) Ta=25 32 300 250 200 150 100 50 25 OUTPUT VOLTAGE (V) 100 28 24 20 16 12 8 70 0 10 20 30 40 50 50 70 90 110 120 140 160 180 200 220 240 264 Ta ( ) INPUT VOLTAGE(VAC)60Hz File Name:GS12U-SPEC 2008-05-06 OUTPUT RIPPLE (mVp-p) LOAD (%)