GS15A-11P1J

GS15A-11P1J

  • 厂商:

    MEANWELL(明纬)

  • 封装:

  • 描述:

    GS15A-11P1J - 12~15WAC-DC Single Output Desktop - Mean Well Enterprises Co., Ltd.

  • 详情介绍
  • 数据手册
  • 价格&库存
GS15A-11P1J 数据手册
12~15W AC-DC Single Output Desktop Features : Universal AC input / Full range GS15A series No load power consumption 120% rated output voltage Protection type : Clamp by zener diode 0 ~ +50 (Refer to "Derating Curve") 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, CSA22.2, EN60950-1 approved I/P-O/P:3KVAC , I/P-FG:1.5KVAC I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022, EN61000-3-2,3, FCC part 15 Class B Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A 500Khrs min. MIL-HDBK-217F(25 ) 100*58.5*32.8mm (L*W*H) 190g ; 90pcs / 18Kg / CARTON Standard type P1J: 2.1 * 5.5 * 11mm, tuning fork type center positive for stock ; Other type available by customer requested Standard type 18Awg UL1185 6ft and 5ft for 3.3V output only for stock ; Other type available by customer requested CONNECTOR NOTE 1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load 7.Efficiency is measured at 230VAC. 8.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:GS15A-SPEC 2011-06-14 12~15W AC-DC Single Output Desktop Mechanical Specification GS15A series Unit:mm UL1185 18AWG 1830 +100/-0 32.8 32.8 100 11 C"+" 58.5 ID 2.1 x OD 5.5 100 32.8 Plug Assignment Standard plug: P1J 29.25 64 58.5 58.5 36 P1J P/N CENTER OUTPUT + NAME PLATE Derating Curve Static Characteristics 100 100 LOAD (%) LOAD (%) 80 60 70 0 10 20 30 40 50 0 50 60 70 80 90 100 260 Ta ( ) INPUT VOLTAGE File Name:GS15A-SPEC 2011-06-14
GS15A-11P1J
1. 物料型号: - 型号包括GS15A系列,具体型号有GS15A-1P1J、GPSU15A-1、GS15A-11P1J、GPSU15A-1-1、GS15A-2P1J、GPSU15A-2、GS15A-3P1J、GPSU15A-3、GS15A-4P1J、GPSU15A-4、GS15A-5P1J、GPSU15A-5 18V、GS15A-6P1J、GPSU15A-6、GS15A-8P1J、GPSU15A-8。

2. 器件简介: - 该系列为12~15W AC-DC单输出桌面型电源适配器,具有通用AC输入、全范围无负载功耗0.3W、符合ErP第二步能效标准、满足EISA 2007(能源独立和安全法案)、3极AC入口IEC320-C14 Class I电源(带接地针)、短路/过载/过电压保护、通过LPS测试、全封闭塑料外壳等特性。

3. 引脚分配: - 标准插头型号为P1J,尺寸为2.1 5.5 11mm,为调羹型中心正极,其他类型可根据客户要求提供。

4. 参数特性: - 输出电压范围从7.5V至48V,额定电流从0.31A至2.40A,额定功率从12W至15W,纹波和噪声最大值为50mVp-p至240mVp-p,电压调整范围从5~6V至33-48V,效率典型值为75%至85%。

5. 功能详解: - 包括过载保护(105~250%额定输出功率,hiccup模式,故障条件移除后自动恢复)、过电压保护(>120%额定输出电压,由齐纳二极管钳位)。

6. 应用信息: - 所有参数在230VAC输入、额定负载、25°C、70%RH环境下指定。纹波和噪声在20MHz下使用0.1uf和47uf电容器测量。容差包括设定容差、线路调节、负载调节。

7. 封装信息: - 尺寸为10058.532.8mm(LWH),连接器为UL1185 18AWG,电缆为标准18Awg UL1185,6英尺和5英尺仅用于3.3V输出,其他类型可根据客户要求提供。
GS15A-11P1J 价格&库存

很抱歉,暂时无法提供与“GS15A-11P1J”相匹配的价格&库存,您可以联系我们找货

免费人工找货