GS15B-2P1J

7.2~15W AC-DC Single Output Desktop Features : Universal AC input / Full range GS15B series No load power consumption 120% rated output voltage Protection type : Clamp by zener diode 0 ~ +50 (Refer to output load derating curve) 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, CSA22.2, EN60950-1 approved I/P-O/P:3KVAC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION Compliance to EN55022 class B, FCC part 15 Class B (Note. 8) HARMONIC CURRENT Compliance to EN61000-3-2,3 EMS IMMUNITY MTBF OTHERS DIMENSION PACKING PLUG CABLE Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A 500Khrs min. MIL-HDBK-217F(25 ) 100*58.5*32.8mm (L*W*H) 190g ; 90pcs / 18Kg / CARTON Standard type P1J: 2.1 * 5.5 * 11mm, tuning fork type center positive for stock ; Other type available by customer requested Standard type 18Awg UL1185 6ft and 5ft for 3.3V output only for stock ; Other type available by customer requested CONNECTOR NOTE 1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load 7.Efficiency is measured at 230VAC. 8.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:GS15B-SPEC 2008-05-06 7.2~15W AC-DC Single Output Desktop Mechanical Specification GS15B series Unit:mm UL1185 18AWG 1530 +100/-0 for 3.3V UL1185 18AWG 1830 +100/-0 for other 32.8 32.8 100 11 C"+" 58.5 ID 2.1 x OD 5.5 100 32.8 Plug Assignment Standard plug: P1J (option) 29.25 64 58.5 58.5 36 P1J P/N CENTER OUTPUT + NAME PLATE Derating Curve Static Characteristics 100 100 LOAD (%) LOAD (%) 80 60 70 0 10 20 30 40 50 0 50 60 70 80 90 100 260 Ta ( ) INPUT VOLTAGE File Name:GS15B-SPEC 2008-05-06