GS160_1011

160W AC-DC Single Output Desktop Features : Universal AC input / Full range 3 pole AC inlet IEC320-C14 GS160 series Built-in active PFC function, PF>0.95 Protections: Short circuit / Overload / Over voltage / Over temperature Fully enclosed plastic case Approvals: UL / CUL / TUV / BSMI / CCC / CB / FCC / CE Class power ( with earth pin) LED indicator for power on No load power consumption0.98 / 115VAC at full load 90% 1A / 230VAC 92% 92.5% 94% 47 ~ 63Hz PF>0.95 / 230VAC 89% 1.85A / 115VAC 120A / 230VAC 0.75mA / 240VAC 105 ~ 135% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 105 ~ 135% rated output voltage Protection type : Shut down o/p voltage, re-power on to recover 90 10 (RTH2) detect on inside ambient temperature Protection type : Shut down o/p voltage, re-power on to recover -30 ~ +70 (Refer to output load derating curve) 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03% / (0~50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1, BSMI CNS14336, CCC GB4943 approved I/P-O/P: 3KVAC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION Compliance to EN55022(CISPR22) ,EN61204-3 class B, CNS13438 class B, GB9254-1 class B (Note. 5) HARMONIC CURRENT Compliance to EN61000-3-2,3, GB17625.1 EMS IMMUNITY OTHERS MTBF DIMENSION PACKING PLUG CABLE Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A 290.3Khrs min. MIL-HDBK-217F(25 ) 175*72*35mm (L*W*H) 0.66Kg; 20pcs/ 14.2Kg/ 0.85CUFT See page 2 ; Other type available by customer requested See page 2 ; Other type available by customer requested CONNECTOR NOTE 1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Tolerance: includes set up tolerance, line regulation, load regulation. 4.Line regulation is measured from low line to high line at rated load. 5.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 7. Derating may be needed under low input voltage. Please check the derating curve for more details. File Name:GS160-SPEC 2010-11-12 160W AC-DC Single Output Desktop Mechanical Specification GS160 Case No.997A series Unit:mm 35 175 UL2464 18AWGx4C 1200 50mm POWER LED 30 3mm 23 14 72 Plug Assignment Standard plug: R7B R7B PIN NO. OUTPUT 2 1 3 4 1,4 2,3 +V -V AC FG -V connected to AC FG Derating Curve 230VAC Static Characteristics 100 85 100 80 80 60 100VAC 70 LOAD (%) LOAD (%) 10 20 30 40 50 60 70 50 40 60 50 40 20 -30 (HORIZONTAL) 85 95 100 110 120 140 160 180 200 220 240 264 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) 60Hz File Name:GS160-SPEC 2010-11-12